50 Hz-16 KHz,+/-3 dB THD: ≤0.7% (1KHz) SNR: ≥85 dB 1.Input 1-3:-50dBx(MIC)/-10dB x(LINE) 2. 600ΩBGM 1-2:10dBx10KΩ The total output power applied on CH1-6 no more than 360W, The MAX Mono output power =180W . Connected to the DS-QAE0MP0G1/EN EVAC Paging Microphone and DS-QAE0MP0G2/EN Remote Paging Microphone. The distance between the unit and paging microphone can reach 100 meters, recommended to us
Extension Port
/ DS-QAE0A150G1-V/ EN/300G1-V/EN/450G1-V/EN.
Emergency Control Input
2-way input, Available to connect with the fire center and process message control. Input 1-6: No-voltage contact input, short-circuit current below 2mA Output 1-6: operation current: 10mA below.
External Volume Intrusion
6 ways of DC outputs, the voltage used to connect with the device which can be
Control
forcibly switched
BGM1/2
2 sets of lotus connectors, External audi o source analog signal input. 6 groups of terminal ports; Switching quantity signal input; None-voltage contace input; Short-circuit current below 2mA. 6 groups of terminal ports; Switching quantity signal output (relay isolation); Operating current less than 10mA. 2 RJ45 ports used to connect with remote emergency microphone (DS-QAE0MP0G1/EN). 1 RJ45 port
Backup Power Status Input
1 RJ45 port used to the switching-quantity signal based on backup power status. 1 Type-B port used to connect with PC to place the voice files, only support MP3 format.
Monitor
2 lotus connector used to output all audio analog signal from the host. 6 ways of RJ45 ports. Connected to the multiple-zone expansion:
Zone Expansion
DS-QAE0A360G1-V6/ENEX/ Single-zone expansion AMP: DS-QAE0A150G1-V/EN/300G1-V/EN/450G1-V/EN LT1 and LT2 used to connect/communicate with signal collector (DS-QASIGNAL/EN). LT3 used to connect with fire controller. RJ45, 1000M bandwith. Used to connect with PC software to upgrade firmware or
Network Control Port
control system configuration.
供電
220-240VAC, 50/60 Hz ,360 W
尺寸
440x402x130 mm
重量
17 kg Extension Amplifier x1; Instructions x3; Power Line x1; Terminal 7pin x4; Terminal 2pin Packing List x3;