| in sub-station applications | for static or dynamic groups and a user-selectable hashing algorithm • EN 50155/IEC 60571 compliant to provide high tolerances for constant vibrations, shocks, and • IEEE 802.1s Multiple Spanning Tree provides high electronic immunity on railway applications link availability in VLAN environments where multiple spanning trees are required; and legacy support for • EN 50121-3-2 Railway—Apparatus fo |
|---|
| and Telecommunications | • High availability with always-on PoE that supplies PoE power even during scheduled reboots and • Dry contact Alarm IO allow simple two-wire interface firmware upgrades that can be easily adapted to third-party sensors |
|---|
| and devices | • Ethernet Ring Protection Switching (ERPS) support for rapid protection and recovery in a ring topology |
|---|
| Data sheet | Page 4 |
|---|
| Quality of service (QoS) features | alarms, history, and statistics groups as well as a To support congestion actions and traffic prioritization, private alarm extension group the CX 4100i includes the following: • TFTP and SFTP support offers different mechanisms for configuration updates; trivial FTP (TFTP) allows • Strict priority (SP) queuing bidirectional transfers over a TCP/ IP network; Secure • Traffic prioritization (IEEE 8 |
|---|
| time classification | to provide additional security • Class of Service (CoS) sets the IEEE 802.1p priority • Debug and sampler utility support ping and traceroute tag based on IP address, IP Type of Service (ToS), for IPv4 and IPv6 Layer 3 protocol, TCP/UDP port number, source port, • Network Time Protocol (NTP) synchronizes and DiffServ timekeeping among distributed time servers and • Rate limiting sets per-port ingr |
|---|
| and per- port, per-queue minimums | clock-dependent devices within the network so the devices can provide diverse applications based on the • Large buffers for graceful congestion management consistent time |
|---|
| Simplified configuration and management | • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) The CX 4100i series supports a choice of management advertises and receives management information interfaces including easy to use Web GUI, industry from adjacent devices on a network, facilitating easy standard CLI, and HPE Aruba Networking Switch Multi- mapping by network management applications Edit Software. Supported by cloud-based HPE Arub |
|---|
| Features include: | while upgrading • Multiple configuration files can be stored to a • Built-in programmable and easy-to-use REST flash image API interface • Unidirectional link detection (UDLD) monitors the link • Industry-standard CLI with a hierarchical structure for between two switches and blocks the ports on both reduced training time and expense. Delivers increased ends of the link if the link goes down at an |
|---|
| productivity in multivendor environments | between the two devices • sFlow (RFC 3176) is ASIC-based wire speed network monitoring and accounting with no impact on network Layer 2 switching performance; network operators can gather a variety The following Layer 2 services are supported: of network statistics and information for capacity • VLAN support and tagging support for IEEE 802.1Q planning and real-time network monitoring purposes (40 |
|---|
| Server MIB, AAA Server State | calculations across service providers, WANs, or MANs • Remote monitoring (RMON) with standard SNMP to • Port mirroring duplicates port traffic (ingress and monitor essential network functions. Supports events, egress) to a monitoring port; supports 4 mirroring groups |
|---|
| Layer 2 network | destination TCP/UDP port number on a per-VLAN or per-port basis Layer 3 switching • Remote Authentication Dial-In User Service (RADIUS) The following Layer 3 routing services are supported: • Terminal Access Controller Access-Control System • Static IP routing provides manually configured routes (TACACS+) delivers an authentication tool using TCP • Dual stack static IPv4 and IPv6 routing provides |
|---|
| manually configured IPv4 and IPv6 routing | providing additional security • Dual IP stack maintains separate stacks for IPv4 and • Management access security for both on- and IPv6 to ease the transition from an IPv4-only network off- box authentication for administrative access. |
|---|
| to an IPv6-only network design | RADIUS or TACACS+ can be used to provide encrypted user authentication. Additionally, TACACS+ |
|---|
| Multicast | can also provide admin authorization services • IGMP Snooping allows multiple VLANs to receive • Control Plane Policing sets rate limit on control the same IPv4 multicast traffic, lessening network protocols to protect CPU overload from DOS attacks bandwidth demand by reducing multiple streams to each VLAN Multicast Listener Discovery (MLD) • Supports multiple user authentication methods. Uses ena |
|---|
| MLD v1 and v2 | with a RADIUS server to authenticate in accordance with industry standards • Internet Group Management Protocol (IGMP) utilizes Any-Source Multicast (ASM) to manage IPv4 multicast • Supports MAC-based client authentication |
|---|
| networks; supports IGMPv1, v2, and v3 | • Concurrent IEEE 802.1X, Web, and MAC • IP multicast snooping (data-driven IGMP) prevents authentication schemes per switch port accepts |
|---|
| flooding of IP multicast traffic | up to 32 sessions of IEEE 802.1X, Web, and MAC authentications |
|---|
| IPv6 capabilities | • Secure management access delivers secure encryption • IPv6 host enables switches to be managed in an IPv6 of all access methods (CLI, GUI, or MIB) through |
|---|
| network | SSHv2, SSL, and/or SNMPv3 • Dual stack (IPv4 and IPv6) transitions from IPv4 to • Switch CPU protection provides automatic protection IPv6, supporting connectivity for both protocols against malicious network traffic trying to shut down • MLD snooping forwards IPv6 multicast traffic to the the switch |
|---|
| appropriate interface | • ICMP throttling defeats ICMP denial-of-service attacks • IPv6 ACL/QoS supports ACL and QoS for IPv6 by enabling any switch port to automatically throttle |
|---|
| network traffic | ICMP traffic |
|---|
| • IPv6 static routing | • Identity-driven ACL enables implementation of a highly granular and flexible access security policy • Security provides RA guard and ND snooping and VLAN assignment specific to each authenticated network user Security Each HPE Aruba Networking CX 4100i Switch comes • STP BPDU port protection blocks Bridge Protocol Data with an integrated trusted platform module (TPM) Units (BPDUs) on ports that |
|---|
| include: | address spoofing • Access control list (ACL) support for both IPv4 and • STP root guard protects the root bridge from malicious IPv6; allows for filtering traffic to prevent unauthorized attacks or configuration mistakes users from accessing the network, or for controlling • Port security allows access only to specified MAC network traffic to save resources; rules can either deny addresses, which |
|---|
| addresses from connecting to the network | support services include priority access to HPE Aruba Networking Technical Assistance Center • Source-port filtering allows only specified ports to (TAC) engineers 24x7x365, flexible hardware and communicate with each other onsite support options, and total coverage for HPE • Secure shell encrypts all transmitted data for secure Aruba Networking products. HPE Aruba Networking |
|---|
| remote CLI access over IP networks | switches with assigned HPE Aruba Networking Central subscriptions benefit with option for additional hardware • Secure Sockets Layer (SSL) encrypts all HTTP support only traffic, allowing secure access to the browser-based |
|---|
| management GUI in the switch | • HPE Aruba Networking Pro Care adds fast access to senior TAC engineers, who are assigned as a single point • Secure FTP allows secure file transfer to and from the of contact for case management, reducing the time switch; protects against unwanted file downloads or spent addressing and resolving issues unauthorized copying of a switch configuration file • Critical Authentication Role ensures tha |
|---|
| source address spoofing | Documentation Portal • DHCP smart relay allows the DHCP relay agent to use • Explore and compare switch features for each platform secondary IP addresses when the DHCP server does and software release on the HPE Aruba Networking |
|---|
| not reply the DHCP-OFFER message | Switch Feature Navigator Address Resolution Protocol (ARP) protection • For support and services information, visit HPE Aruba blocks packets from unauthorized hosts, preventing Networking Support Services eavesdropping or theft of network data. Convergence • LLDP-MED (Media Endpoint Discovery) defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatica |
|---|
| HPE Aruba Networking 4100i 12-port 1GbE | HPE Aruba Networking 4100i 24-port 1GbE (8-port Class 4 PoE and 4-port Class 6 PoE) (20-port Class 4 PoE and 4-port Class 6 PoE) 2-port SFP+ DIN Mount Switch (JL817A) 4-port SFP+ Switch (JL818A) |
|---|
| Description | 4x ports 100M/1G BaseT Class 6 PoE ports 4x ports 100M/1G BaseT Class 6 PoE ports |
|---|
| supporting up to 60W per port | supporting up to 60W per port 8x ports 100M/1G BaseT Class 4 PoE ports 20x ports 100M/1G BaseT Class 4 PoE ports |
|---|
| supporting up to 30W per port | supporting up to 30W per port 2x 1/10G SFP ports 4x 1/10G SFP ports Supports PoE Standards IEEE 802.3af, 802.3at Supports PoE Standards IEEE 802.3af, 802.3at |
|---|
| and 802.3bt (up to 60W) | and 802.3bt (up to 60W) 1x USB-C Console Port 1x RJ Console 1x USB-C Console Port 1x RJ Console 1x USB Type A Host port 1x Alarm socket 1x USB Type A Host port 1x Alarm socket 2x DC power socket |
|---|
| Power supplies | Field replaceable Industrial DIN Rail Power Fixed internal power supply (300W) |
|---|
| Supplies | 240W of PoE Power (no de-rating) Supported PSUs: JL819A, JL820A and JL821A Supported 2 PSU with redundancy, non sharing See external PSU specification table for available |
|---|
| Fans | Fanless Fanless |
|---|
| 尺寸 | (H) 160 mm x (H) 44 mm x (W) 113 mm x (W) 444.5 mm x (D) (D) 162.9 mm (173.5 mm w/DIN Rail Bracket) 304.4 mm 1.73” x [6.3” x 4.4” x 6.4” (6.8” w/DIN Rail Bracket)] 17.5” x 12.0” |
|---|
| Configuration weight | 3.84 kg (8.46 lbs) 6.50 kg (14.33 lbs) |
|---|
| CPU | Dual Core ARM Cortex A9 @ 1016 Mhz Dual Core ARM Cortex A9 @ 1016 Mhz |
|---|
| Memory and flash | 4 GB DDR3 4 GB DDR3 32 GB eMMC 32 GB eMMC |
|---|
| Packet buffer | 12.38MB (4.5MB Ingress/7.875MB Egress) 12.38MB (4.5MB Ingress/7.875MB Egress) |
|---|
| Model switching capacity | up to 64 Gbps up to 128 Gbps |
|---|
| Model throughput capacity | up to 46 Mpps up to 95 Mpps |
|---|
| Average latency (LIFO-64-bytes packets) | 1 Gbps: 2.390 μ Sec , 10 Gbps: 2.038 μ Sec 1 Gbps: 1.585 μ Sec , 10 Gbps: 1.243 μ Sec |
|---|
| Switched virtual interfaces (dual stack) | 16 16 |
|---|
| IPv4 host table (ARP) | 756 756 |
|---|
| IPv6 host table (ND) | 576 576 |
|---|
| IPv4 unicast routes | 576 576 |
|---|
| IPv6 unicast routes | 576 576 |
|---|
| MAC table size | 8192 8192 |
|---|
| IGMP groups | 512 512 |
|---|
| MLD groups | 512 512 |
|---|
| IPv4/IPv6/MAC ACL entries (ingress) | 256/128/256 256/128/256 |
|---|
| 工作溫度 | -40°C to 60°C, 0m/s (-40°F to 140°F, 0 LFM) -40°C to 60°C, 0m/s (-40°F to 140°F, 0 LFM) -40°C to 70°C, 0.2m/s (-40°F to 158°F, 40 LFM) -40°C to 70°C, 0.2m/s (-40°F to 158°F, 40 LFM) -34°C to 75°C, 1m/s (-29.2°F to 167°F, 200 LFM) -34°C to 75°C, 1m/s (-29.2°F to 167°F, 200 LFM) |
|---|
| Non-operating storage relative humidity | 5% to 95%, non-condensing 5% to 95%, non-condensing |
|---|
| Max operating altitude | up to 4.2 km (13800 ft) Max up to 4.2 km (13800 ft) Max |
|---|
| Max non-operating altitude | 4.6 km (15000 ft) Max 4.6 km (15000 ft) Max |
|---|
| Frequency | N/A 50Hz/60Hz |
|---|
| AC voltage | Refer to the PSU specification table 100V-240V |
|---|
| DC input voltage | 54V (switch input voltage, provided by JL819A, N/A JL820A, JL821A) |
|---|
| Current | JL820A—max 8A (360W PoE) max 3.9A/1.9A (240W PoE) JL819A, JL821A—max 4.4A (180W PoE) |
|---|
| Maximum heat dissipation BTU/hr | With JL819A PSU: 117 BTU/hr at 230V - Room temperature (25° C) 89 BTU/hr at 230V—Room temperature (25°C) With JL820A PSU: 95 BTU/hr at 230V—Room temperature (25°C) With JL821A PSU: 94 BTU/hr at 48V—Room temperature (25°C) |
|---|
| Power consumption (JL819A, JL820A-230VAC) | With JL819A PSU: Idle: 23W 100% Traffic Rate: 26W 100% Traffic Rate (w/heater): 62W 100% Traffic Rate (w/heater): 55W *Heater will only turn on at extreme low |
|---|
| With JL820A PSU: | temperature condition Idle: 24W 100% Traffic Rate: 28W 100% Traffic Rate (w/heater): 57W |
|---|
| *Heater will only turn on at extreme low | temperature condition temperature condition |
|---|
| Europe: | Europe: |
|---|
| EN 60950-1:2006 + A11:2009 + A1:2010 + | EN 60950-1:2006 + A11:2009 + A1:2010 + |
|---|
| A12:2011 + A2:2013 | A12:2011 + A2:2013 |
|---|
| EN 62368-1, Ed.2:2014 | EN 62368-1, Ed.2:2014 |
|---|
| North America: | North America: |
|---|
| UL 62368-1, 2nd Edition CAN/CSA C22.2 | UL 62368-1, 2nd Edition CAN/CSA C22.2 |
|---|
| No. 62368-1-14 | No. 62368-1-14 |
|---|
| Worldwide: | Worldwide: |
|---|
| IEC 60950-1:2005 Ed.2 + Am 1:2009 + | IEC 60950-1:2005 Ed.2 + Am 1:2009 + A2:2013 |
|---|
| A2:2013 IEC 62368-1:2014 | IEC 62368-1:2014 |
|---|
| EN/IEC 60825-1:2014 Class 1 | EN/IEC 60825-1:2014 Class 1 |
|---|
| UL/IEC 61010-2-201 | UL/IEC 61010-2-201 |
|---|
| GB 4943.1:2011 | GB 4943.1:2011 |
|---|
| CNS 14336-1 | CNS 14336-1 |
|---|
| K 60950-1 | K 60950-1 |
|---|
| EN 55011:2010/CISPR 11, Class A EN | EN 55011:2010/CISPR 11, Class A EN 55032:2015/CISPR 32, Class A EN 55032:2015/CISPR 32, Class A EN 55035:2017/CISPR 35 55035:2017/CISPR 35 |
|---|
| EN 61000-3-2:2014, Class A EN 61000-3— | EN 61000-3-2:2014, Class A EN 61000-3-3:2013 3:2013 US: |
|---|
| US: | FCC CFR 47 Part 15: 2018 Class A FCC CFR 47 Part 15: 2018 Class A Canada: |
|---|
| Canada: | ICES-003 Class A ICES-003 Class A Japan: |
|---|
| Japan: | VCCI Class A VCCI Class A Taiwan (BSMI) CNS 13438 Class A Taiwan (BSMI) CNS 13438 Class A Korea |
|---|
| Korea | KN 35:2015 KN 35:2015 Korea |
|---|
| Aus/NZ | AS/NZS CISPR 32 Class A AS/NZS CISPR 32 Class A Worldwide: VCCI Class A |
|---|
| Worldwide: VCCI Class A | CISPR 11 Class A CISPR 22 Class A CISPR 32 CISPR 11 Class A CISPR 22 Class A CISPR 32 Class A Class A |
|---|
| EN 60825-1:2007/IEC 60825-1:2007 Class | EN 60825-1:2007/IEC 60825-1:2007 Class 1 Class 1 Class 1 Laser Products/Laser Klasse 1 1 Laser Products/Laser Klasse 1 (Applicable for accessories— (Applicable for accessories— |
|---|
| Optical Transceivers only | Optical Transceivers only) |
|---|
| Industrial | EN 61000-6-2 Industrial Immunity EN 61000-6-2 Industrial Immunity |
|---|
| EN 61000‑6‑4 Industrial Emissions | EN61000‑6-4 Industrial Emissions |
|---|
| EN 61000‑6‑1 Light Industrial Immunity | EN 61000‑6‑1 Light Industrial Immunity |
|---|
| Power substation | IEEE 1613 Electric Power Stations IEEE 1613 Electric Power Stations |
|---|
| Communications Networking EN/IEC 61850-3 | Communications Networking EN/IEC 61850-3 Electric Substations Communications Networking Electric Substations Communications Networking |
|---|
| Railway application | EN 50121-3-2 Railway—Apparatus for EN 50121-3-2 Railway—Apparatus for |
|---|
| Rolling Stock | Rolling Stock |
|---|
| EN 50121-4 Railway—Signaling and | EN 50121-4 Railway—Signaling and |
|---|
| Telecommunications Apparatus | Telecommunications Apparatus |
|---|
| EN 50155/IEC 60571—Railway applications, | EN 50155/IEC 60571—Railway applications, |
|---|
| Rolling stock, Electronic equipment | Rolling stock, Electronic equipment |
|---|
| Traffic control system | NEMA TS 2-2016 NEMA TS 2-2016 |
|---|
| Protection standard | EN 60529 IP30 EN 60529 IP30 |
|---|
| Generic | EN 55035, CISPR 35, KN35 EN 55035, CISPR 35, KN35 |
|---|
| EN | EN 55035, CISPR 35 EN 55035, CISPR 35 |
|---|
| ESD | EN 61000-4-2 (air—15kV, contact—8kV) EN 61000-4-2 (air—15kV, contact—8kV) |
|---|
| Radiated | EN 61000-4-3 (10V/m UTP, 20V/m STP) EN 61000-4-3 (10V/m UTP, 20V/m STP) |
|---|
| EFT/Burst | EN 61000-4-4 EN 61000-4-4 4kV (1kV UTP, 4kV STP) using: 4kV (1kV UTP, 4kV STP) • JL819A, JL820A with SPD2-300-2P0-R surge protector • JL821A with SPD2-150-2P0-R surge protector needed • Without surge protector and STP: • JL819A or JL820A PSU: 2kV • JL821A PSU: 1kV |
|---|
| Surge | EN 61000-4-5 EN 61000-4-5 2kV/4kV(UTP) using: 2kV/4kV(UTP) • JL819A, JL820A with SPD2-300-2P0-R surge protector • JL821A with SPD2-150-2P0-R surge protector Without surge protector: • JL819A or JL820A PSU: 1kV/2kV • JL821A PSU: N/A |
|---|
| Conducted | EN 61000-4-6 (3Vrms UTP, 10Vrms STP) EN 61000-4-6 (3Vrms UTP, 10Vrms STP) |
|---|
| Power frequency magnetic field | EN 61000-4-8 (100A/m 1min,1000A/m 1sec) EN 61000-4-8 (100A/m 1min,1000A/m 1sec) |
|---|
| Damped oscillatory magnetic field | EN 61000-4-10 (100A/m) EN 61000-4-10 (100A/m) |
|---|
| Conducted CM disturbances | EN 61000-4-16 (30V, Cont/300V, 1 sec) EN 61000-4-16 (30V, Cont/300V, 1 sec) |
|---|
| Ripple immunity DC power | EN 61000-4-17 (10%) EN 61000-4-17 (10%) |
|---|
| Damped oscillatory wave | EN 61000-4-18 (2.5kV, 1MHz) EN 61000-4-18 (2.5kV, 1MHz) |
|---|
| Voltage dips and interruptions | EN 61000-4-29; EN 61000-4-11 (Level 3) EN 61000-4-29; EN 61000-4-11 (Level 3) |
|---|
| Harmonics | EN 61000-3-2, IEC 61000-3-2 EN 61000-3-2, IEC 61000-3-2 |
|---|
| Flicker | EN 61000-3-3, IEC 61000-3-3 EN 61000-3-3, IEC 61000-3-3 |
|---|
| Vibration | IEC 60068-2-6 & 64 (operation & non‑operation) IEC 60068-2-6 & 64 (operation & non-operation) |
|---|
| Shock | IEC 60068-2-27 (Operational Shock, 30G, 18ms, IEC 60068-2-27 (Operational Shock, 30G, 18ms, |
|---|
| Half-Sine) | Half-Sine) IEC 60068-2-27 (Non-operational Shock, 50G, IEC 60068-2-27 (Non-operational Shock, 50G, 11ms, Trapezoidal) 11ms, Trapezoidal) |
|---|
| IEC 60068-2-31 (Non-operational | IEC 60068-2-31 (Non-operational Free |
|---|
| Free Fall, 100mm) IEC 60068-2-31 | Fall, 100mm) (Non‑operational Topple) |
|---|
| Mounts to JL822A (3U DIN-to-Rack Bracket, | Mounts to an EIA/TIA standard 19" telco rack. purchased separately) which allows the switch Mounting brackets included with product. to be mounted in an EIA/TIA standard 19” |
|---|
| telco rack. | Can be wall-mounted, flush against wall with ports facing down only—see installation guide Switch can be directly installed on a DIN rail for details. mounted to a suitable surface to withstand the weight of the switch and power supplies. |
|---|
| DIN rail mounting (included) | Mounts to an EIA/TIA standard 19" telco rack. Mounting brackets included with product. Can be mounted in 90-degree manner to present the cables exiting the side of the switch—see Can be wall-mounted, flush against wall with |
|---|
| installation guide for details. | ports facing down only—see installation guide for details. |
|---|
| Power input | AWG 14 up to 2m C15 Connector |
|---|
| Alarm connector | AWG 18-16 AWG 18-16 User configurable PoE budget—If 2 external 240W no derating power supply units are used concurrently, please set according to PSU with lower PoE capacity JL819A— Below ambient 50°C: 180W At ambient 60°C: 140W At ambient 70°C: 80W JL820A— Below ambient 50°C: 360W At ambient 60°C: 320W At ambient 70°C: 200W JL821A— With PSU input = 48V-55V DC Below ambient 50°C: 180W At ambient 6 |
|---|
| Specifications | HPE Aruba Networking 4000i HPE Aruba Networking 4000i PoE HPE Aruba Networking 4000i PoE |
|---|
| Networking CX 4100i switch) | DIN power supply (JL819A) power supply (JL820A) supply (JL821A) |
|---|
| Horizontal: 40°C de-rate power by | >70°C de-rate power by 5%/°C 2.5%/°C |
|---|
| Operating relative humidity | 5% to 95%, non-condensing 5% to 95%, non-condensing 5% to 95%, non-condensing |
|---|
| Non-operating | -40°C to 85°C (-40°F to 185°F ) -40°C to 85°C (-40°F to 185°F ) -40°C to 80°C (-40°F to 176°F ) |
|---|
| Non-operating storage | 5% to 95%, non-condensing 5% to 95%, non-condensing 5% to 95%, non-condensing |
|---|
| Mounts to JL822A (3U DIN-to—Rack | Mounts to JL822A (3U DIN-to—Rack Mounts to JL822A (3U DIN-to—Rack |
|---|
| Bracket, purchase separately) attached | Bracket, purchase separately) attached Bracket, purchase separately) attached |
|---|
| to an EIA-standard 19" telco rack or | to an EIA-standard 19" telco rack or to an EIA-standard 19" telco rack or |
|---|
| equipment cabinet which has DIN rail | equipment cabinet which has DIN rail equipment cabinet which has DIN rail |
|---|
| installed. | installed. installed. |
|---|
| DIN rail mounting. | DIN rail mounting. DIN rail mounting. Vertical mounting only. |
|---|
| Vertical mounting only. | Vertical mounting only. |
|---|
| 電源輸出 | AWG 14 up to 2m AWG 14 up to 2m AWG 14 up to 2m |
|---|
| Input operating range | AC 100—240V AC 100—240V Nominal to 12—48 VDC UL certified to 11—55 VDC |
|---|
| PoE power budget below 50°C ambient | 180W 360W 180W with input = 48V-55V DC 150W 12V DC |
|---|
| PoE power budget with 60°C ambient | 140W 320W 150W with input = 48V-55V DC 150W with input = 24V DC 60W with input = 12V DC |
|---|
| PoE power budget with 70°C ambient | 80W 200W 150W with input = 48V-55V DC 150W with input = 24V DC 50W with input = 12V DC |
|---|
| De-rating condition for PSU | De-rating for vertical mounting De-rating for vertical mounting — |
|---|
| orientation | orientation |
|---|
| >50°C de-rate power by 2.5%/°C | >50°C de-rate power by 2.5%/°C, >70°C de-rate power by 5%/°C De-rating for horizontal mounting orientation >40°C de-rate power by 2.5%/°C |
|---|
| Standards and protocols | • RFC 4251 SSHv6 Architecture • RFC 4252 SSHv6 Authentication • RFC 1591 DNS (client) • RFC 4253 SSHv6 Transport Layer • SSHv1/SSHv2 Secure Shell • RFC 4254 SSHv6 Connection • IEEE 802.1D MAC Bridges • RFC 4293 MIB for IP • IEEE 802.1p Priority • RFC 4419 Key Exchange for SSH • IEEE 802.1Q VLANs • RFC 4443 ICMPv6 • IEEE 802.1s Multiple Spanning Trees • RFC 4861 IPv6 Neighbor Discovery • IEEE 802.1 |
|---|
| • IEEE 802.3af Power over Ethernet | (Partial support. MIB objects supported: |
|---|
| • IEEE 802.3at Power over Ethernet | – ieee8021BridgeBasePort, ieee8021BridgeBasePort, |
|---|
| • IEEE 802.3bt Power over Ethernet | – ieee8021BridgePortMrpJoinTime, |
|---|
| • IEEE 802.3az Energy Efficient Ethernet | – ieee8021BridgePortMrpLeaveTime, |
|---|
| • IEEE 802.3x Flow Control | – ieee8021BridgePortMrpLeaveAllTime) • RFC 768 UDP • RFC 2737 Entity MIB • RFC 783 TFTP Protocol (revision 2) • RFC 2863 The Interfaces Group MIB • RFC 792 ICMP • IEEE 802.1AB Link Layer Discovery Protocol (LLDP) • RFC 793 TCP • RFC 1098 A Simple Network Management |
|---|
| • RFC 826 ARP | Protocol (SNMP) |
|---|
| • RFC 1350 TFTP Protocol (revision 2) | • ANSI/TIA-1057 LLDP Media Endpoint |
|---|
| • RFC 2131 DHCP client | Discovery (LLDPMED) • RFC 4330 Simple Network Time Protocol (SNTP) v4 • SNMPv1/v2c/v3 |
|---|
| • RFC 951 BOOTP (VLAN 1 Only) | • RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) • RFC 1542 BOOTP Extensions (VLAN 1 only) • RFC 1098 A Simple Network Management |
|---|
| • IGMPv2/IGMPv3 | Protocol (SNMP) |
|---|
| • IGMP/MLD Snooping | • RFC 2474 DiffServ precedence, with 2/4/8 queues |
|---|
| • RFC 1981 IPv6 Path MTU Discovery | per port |
|---|
| • RFC 2460 IPv6 Specification | • RFC 2475 DiffServ Architecture • RFC 2925 Remote Operations MIB (Ping only) • RFC 2597 DiffServ Assured Forwarding (AF) |
|---|
| • RFC 3315 DHCPv6 (client only) | • RFC 2598 DiffServ Expedited Forwarding (EF) |
|---|
| • RFC 3513 IPv6 Addressing Architecture | • IEEE 802.1X Port Based Network Access Control |
|---|
| • RFC 3596 DNS Extension for IPv6 | • RFC 1492 TACACS+ |
|---|
| • RFC 3176 sFlow | • RFC 2138 RADIUS Authentication |
|---|
| • RFC 4022 MIB for TCP | • RFC 2866 RADIUS Accounting |
|---|
| • RFC 4113 MIB for UDP (Partially) | • Secure Sockets Layer (SSL) |
|---|
| HPE Aruba Networking CX 4100i | Transceivers (supported for 0ºC to 50ºC temperature range) |
|---|
| switches and accessories | • HPE Aruba Networking 100M SFP LC FX 2km MMF |
|---|
| Switch models | XCVR (J9054D) • HPE Aruba Networking CX 4100i 12-port 1GbE (8- • HPE Aruba Networking 1G SFP LC SX 500m MMF port Class 4 PoE and 4-port Class 6 PoE) 2-port SFP+ Transceiver (J4858D) DIN Mount Switch (JL817A) • HPE Aruba Networking 1G SFP LC LX 10km SMF • HPE Aruba Networking CX 4100i 24-port 1GbE (20- Transceiver (J4859D) port Class 4 PoE and 4-port Class 6 PoE) 4-port SFP+ |
|---|
| Switch (JL818A) | • HPE Aruba Networking 10G SFP+ LC SR 300m MMF Transceiver (J9150D) Power Supplies (for 12 port DIN rail model) • HPE Aruba Networking 10G SFP+ LC LR 10km SMF • HPE Aruba Networking CX 4000i POE 54VDC 240W Transceiver (J9151E) 100-240VAC DIN Power Supply (JL819A) Accessories • HPE Aruba Networking CX 4000i POE 54VDC 480W • HPE Aruba Networking DIN Rail 3RU 19inch Rack 100-240VAC DIN Power Supply ( |
|---|
| MMF XCVR (JL780A) | Cable (R8Z87A) • HPE Aruba Networking 1G I-Tmp SFP LC LX 10km • HPE Aruba Networking USB-A to USB-C PC-to-Switch |
|---|
| SMF XCVR (JL781A) | Cable (R9J32A) • HPE Aruba Networking 10G I-Tmp SFP+ LC SR 300m • HPE Aruba Networking USB-C to USB-C PC-to-Switch |
|---|
| MMF XCVR (JL782A) | Cable (R9J33A) • HPE Aruba Networking 10G I-Tmp SFP+ LC LR 10km Software |
|---|
| SMF XCVR (JL783A) | • HPE Aruba Networking Switch Multi-Edit Software Single Node: 1-year (JL639AAE) • HPE Aruba Networking Switch Multi-Edit Software Single Node: 3-years (JL640AAE) HPE Aruba Networking Central Foundational License For details and complete listing of HPE Aruba Networking Central licensing options, please see the HPE Aruba Networking Central SaaS Subscription Ordering Guide. Support For HPE Aruba Net |
|---|
