60 W Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. Ports 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. Ports 1 to 4: port isolation mode to improve network security
Port Isolation
Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
PoE Watchdog
Ports 1 to 4: auto detect and restart the cameras that do not respond. Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s). Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network comm
VLAN
Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN. Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. HPP 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port l
System Maintenance
Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: