| 機身 | Metal material |
|---|
| 淨重 | 2.13 kg (4.7 lb) |
|---|
| 毛重 | 3.1 kg (6.8 lb) |
|---|
| 尺寸 | 440.00 mm × 44.00 mm × 220.80 mm (17.32'' × 1.73'' × 8.69'') |
|---|
| 工作溫度 | 0 °C to 45 °C (0 °F to 113 °F) |
|---|
| 儲存溫度 | -40 °C to 85 °C (-40 °F to 185 °F) |
|---|
| 工作濕度 | 5% to 95% (no condensation) |
|---|
| 相對濕度 | 5% to 95% (no condensation) |
|---|
| 供電 | 100-240 V AC, 50/60 Hz, Max. 4 A |
|---|
| 最大功耗 | 250 W |
|---|
| 安裝方式 | Rack (equipped with mounting ears) |
|---|
| 閒置功耗 | 20 W |
|---|
| 防雷 | 6 kV |
|---|
| Ports | 24 × 10/100 Mbps PoE port,1 × Gigabit combo,1 × Gigabit RJ45 port |
|---|
| MAC 位址表 | 16 K Whole-Device Performance: 14.8 Gbps Port Performance: 8.8 Gbps Whole-Device Performance: 11.01 Mpps Port Performance: 6.55 Mpps |
|---|
| 內部緩存 | 4 Mbits |
|---|
| PoE 標準 | IEEE 802.3af,IEEE 802.3at |
|---|
| PoE 供電腳位 | 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) |
|---|
| PoE 埠 | PoE: Ports 1 to 24 |
|---|
| 單埠最大功率 | 30 W |
|---|
| PoE 功率預算 | 230 W Ports 1 to 24: up to 300 m. Long range performance may vary depend on camera model or cable condition. Ports 1 to 8: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient. Ports 1 to 24: port isolation mode to improve network security |
|---|
| Port Isolation | Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|---|
| PoE Watchdog | Ports 1 to 24: auto detect and restart the cameras that do not respond. Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation group(s). Loop prevention is used to prevent the switching network from forming loops, which will seriously affect network com |
|---|
| VLAN | Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. HPP 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port |
|---|
| EMC | 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015) CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368-1: 2014+A11: 2017) |
|---|
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
|---|