| 機身 | Metal material |
|---|
| 淨重 | 0.58 kg (1.28 lb) |
|---|
| 毛重 | 1.37 kg (3.02 lb) |
|---|
| 尺寸 | 145.0 mm × 27.6 mm × 93.1 mm (5.71'' × 1.09'' × 3.67'') |
|---|
| 工作溫度 | 0 °C to 40 °C (32 °F to 104 °F) |
|---|
| 儲存溫度 | -40 °C to 85 °C (-40 °F to 185 °F) |
|---|
| 工作濕度 | 5% to 95% (no condensation) |
|---|
| 相對濕度 | 5% to 95% (no condensation) |
|---|
| 供電 | 54 V DC, 0.92 A |
|---|
| 安裝方式 | Desk-Mounted,Wall-Mounted |
|---|
| 最大功耗 | 50 W |
|---|
| 閒置功耗 | 5W |
|---|
| 防雷 | 6 kV |
|---|
| Ports | 4 × Gigabit PoE port,1 × Gigabit RJ45 port,1 × Gigabit fiber optical port |
|---|
| MAC 位址表 | 4K |
|---|
| 交換容量 | 14 Gbps |
|---|
| 包轉發率 | 10.42 Mpps |
|---|
| 內部緩存 | 2 Mbits |
|---|
| PoE 標準 | IEEE 802.3af,IEEE 802.3at |
|---|
| PoE 供電腳位 | End-span: 1/2(-), 3/6(+) |
|---|
| PoE 埠 | PoE: Ports 1 to 4 |
|---|
| 單埠最大功率 | 30 W |
|---|
| PoE 功率預算 | 45 W Ports 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition. Ports 1 to 6: port isolation mode to improve network security |
|---|
| Port Isolation | Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|---|
| PoE Watchdog | Ports 1 to 4: auto detect and restart the cameras that do not respond. Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 2 aggregation group(s). QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. |
|---|
| QoS | Support port-based priority configuration. Support SP and WRR priority scheduling modes. Support DSCP-based QoS policy. will seriously affect network communication. Disabled by default. Support 802.1D STP. Support 802.1w RSTP. VLAN is used for network scale planning and network health improvement. Support 802.1Q. |
|---|
| VLAN | Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port lon |
|---|
| System Maintenance | Support management via Hik-Central Pro. Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Support 802.1ab LLDP for peer device discovery. Support port mirroring for fault locating. DHCP Snooping can prevent unauthorized connections to DHCP servers from |
|---|
| DHCP Snooping | disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. |
|---|
| DDM (Digital Diagnostic | Support real-time monitoring of key parameters in optical modules, such as operating |
|---|
| Monitoring) | temperature, operating voltage, operating current, and Rx and Tx optical power. CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020) CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368- 1: 2014+A11: 2017) CE-RoHS (201165EU); |
|---|
| Chemistry | WEEE (201219EU); Reach (Regulation (EC) No.19072006) |
|---|