| 機身 | Metal material, IP40 |
|---|
| 淨重 | 0.84 kg (1.85 lb) |
|---|
| 毛重 | 1.16 kg (2.56 lb) |
|---|
| 尺寸 | 155.00 mm × 46.00 mm × 130.00 mm (6.10'' × 1.81'' × 5.12'') |
|---|
| 工作溫度 | -40 °C to 75 °C (-40 °F to 167 °F) |
|---|
| 儲存溫度 | -40 °C to 85 °C (-40 °F to 185 °F) |
|---|
| 工作濕度 | 5% to 95% (no condensation) |
|---|
| 相對濕度 | 5% to 95% (no condensation) 48~57 V DC, 7.5 A |
|---|
| 供電 | 52 V~57 V recommended input voltage to ensure stable power supply. Support dual power inputs and hot backup. |
|---|
| 安裝方式 | Desk-Mounted,Rail |
|---|
| 最大功耗 | 307 W |
|---|
| 閒置功耗 | 7W |
|---|
| 防雷 | 6 kV |
|---|
| Ports | 8 × Gigabit PoE port,4 × Gigabit fiber optical port |
|---|
| MAC 位址表 | 8K Whole-Device Performance: 56 Gbps Port Performance: 24 Gbps Whole-Device Performance: 41.66 Mpps Port Performance: 17.86 Mpps |
|---|
| 內部緩存 | 4.1 Mbits Ports 1 to 4: IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Ports 5 to 8: IEEE 802.3af, IEEE 802.3at Ports 1 to 4: 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-) Ports 5 to 8: End-span: 1/2(-), 3/6(+) Ports 1 to 4: 90 W Ports 5 to 8: 30 W Hi-PoE: Ports 1 to 4 PoE: Ports 5 to 8 |
|---|
| PoE 功率預算 | 300 W Ports 1 to 8: up to 300 m. Long range performance may vary depend on camera model or cable condition. Ports 1 to 8: port isolation mode to improve network security |
|---|
| Port Isolation | Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group. |
|---|
| PoE Watchdog | Ports 1 to 8: auto detect and restart the cameras that do not respond. Link aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 8 aggregation groups. will seriously affect network communication. Disabled by default. |
|---|
| Loop Prevention | Support 802.1D STP. Support 802.1w RSTP. Support G.8032 ERPS. QoS is used to allocate bandwidth to different services so as to provide end-to-end service quality assurance. Support port-based priority configuration. Support SP, WRR priority schedule mode. VLAN is used for network scale planning and network health improvement. Support 802.1Q. |
|---|
| VLAN | Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 4094 VLAN. Support one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port lon |
|---|
| System Maintenance | Support remote management via Hik-Partner Pro. Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected. Supports 802.1ab LLDP for peer device discovery. Support SNMP v1/v2c for third-party management platform access. Support port mirroring for fault locating. Port rate-limiting is used for port bandwidth adjustment to prevent network conge |
|---|
| DHCP Snooping | disrupting the network and affecting normal network communication, and only allow DHCP packets from trusted ports to pass through. Disabled by default. Port security strategy. |
|---|
| ACL | Support up to 64 ACL entries. Support up to 128 configuration rules under all ACL entries. |
|---|
| IPSG | Support port, MAC, IP binding. Support 256 security entries. CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: |
|---|
| EMC | 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015) CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition)), CE-LVD (EN 62368- 1: 2014+A11: 2017) |
|---|
| Chemistry | CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006) |
|---|