| Diameter | B501: 4.1" (104 mm); B210LP: 6.1" (155 mm); B224BI, B224RB, B200SR, B200S: 6.875" (175 mm) |
|---|
| Wire Gauge | B224BI, B224RB, B200SR, B200S, B210LP, B501: 24 to 12 AWG |
|---|
| Temperature Range | Refer to applicable sensor Operating Temperature Range using the Base/Sensor Cross Reference Chart at systemsensor.com |
|---|
| Humidity Range | 10% to 93% RH non-condensing |
|---|
| B224RB/B224BI Electrical Ratings | B200SR/B200S Electrical Ratings |
|---|
| Operating Voltage | 15 to 32 VDC (powered by SLC) External Supply Voltage 16 to 33 VDC (VFWR) |
|---|
| Standby Current | 170/450 µA max. Standby Current 500 µA max. |
|---|
| Set Time (B224RB only) | Short Delay: 60 to 100 msec Long Delay: 6 to 10 sec |
|---|
| Reset Time (B224RB only) | 20 msec max. |
|---|
| Relay Characteristics | 2 coil latching relay Sound Output Greater than 90 dBA measured in anechoic |
|---|
| UL/ULC Rating: | in UL reverberant room 0.5 A @ 125 VAC Alarm Current 35 mA max. 0.9 A @ 125 VDC 3 A @ 30 VDC |
|---|
| Single | 3.5" 4" 4" 4" 50 60 70 75 |
|---|
| B501 | No Yes No No Yes Yes Yes Yes No |
|---|
| B210LP | Yes Yes Yes Yes Yes No No Yes No |
|---|
| B224RB | Yes No Yes Yes Yes No No Yes No |
|---|
| B224BI | Yes No No Yes Yes No No Yes No |
|---|
| B200SR/B200S | Yes Yes† Yes Yes Yes† No No Yes No B200SA is not compatitble with this junction box |
|---|
| Ordering Information, 200 Series Bases | B200S Addressable Sounder Base |
|---|
| B501* | 4" Flangeless Mounting Base When used with compatible fire alarm control panels, the B200S |
|---|
| B501BP* | 4" Flangeless Mounting Base Bulk Pack sounder base provides unmatched flexibility to configure the output |
|---|
| B210LP* | 6" Flanged Mounting Base to various events. When combined with System Sensor SpectrAlert® |
|---|
| B210LPBP* | 6" Flanged Mounting Base Bulk Pack Advance notification appliances, the B200S can serve as a UL464 |
|---|
| B200SR* | Standard Sounder Base compliant component of the general evacuation signaling, improving (Compatible with B501BH Series) aesthetics and reducing system costs. |
|---|
| B200S* | Intelligent Addressable Sounder Base |
|---|
| B224RB* | Relay Base Features*: |
|---|
| B224BI* | Isolator Base imple addressing scheme - base adopts the same address as |
|---|
| SMB600 | Surface Mounting Kit (flanged) attached sensor |
|---|
| F110 | Accessory Flange Ring for 6" Base • Synchronizable with SpectrAlert Advance notification appliances |
|---|
| F110BP | Accessory Flange Ring for 6" Base Bulk Pack • Four standard tone patterns at two selectable volumes |
|---|
| F210 | Accessory New Smaller Flange Ring for 6” Base |
|---|
| RA100Z* | Remote LED Annunciator • Custom tone capability |
|---|
| M02-04-00 | Detector Test Magnet • Support for Temporal-4 CO annunciation |
|---|
| M02-09-00 | Test Magnet with Telescoping Handle |
|---|
| XR2B | Detector Removal Tool (T55-127-000 included) |
|---|
| XP-4 | Extension Pole for XR2B (5 to 15 ft.) * Note: Some features are dependent on Fire Alarm Panel programming. |
|---|
| T55-127-000 | Detector Removal Head Consult your Fire Alarm Panel manual for more information on the |
|---|
| BCK-200B | Black Detector Kit capabilities of your system. |
|---|
| WCK-200B | White Detector Kit 3825 Ohio Avenue • St. Charles, IL 60174 ©2012 System Sensor. |
|---|
| Phone: 800-SENSOR2 • Fax: 630-377-6495 | Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. |
|---|
| www.systemsensor.com | SPDS13801 • 09/12 |
|---|
