| COM contact for | 33 Wi-Fi of the Wi-Fi 26 COM |
|---|
| Relay 4 | (Off, Green, Yellow, and Red) Normally Closed 27 NC4 |
|---|
| contact | Indicates operational status |
|---|
| Ethernet | 34 Bluetooth of the Bluetooth 1 (Off, Green, Yellow, RJ45 10/100 base-T/TX 28 and Red) Ethernet 2 Indicates the operational status |
|---|
| WiFi | Antenna for both 35 Main LED of the Smart IO Connector |
|---|
| and | Wi-Fi and (Off, Green, Yellow, SMA 29 Bluetooth Bluetooth and Red) |
|---|
| antenna | 802.11a/b/g/n/ac + BT 4.2 NOTES: |
|---|
| Physical button to | — Ethernet Ports are for Future Use Reset/Wireless |
|---|
| activate Bluetooth | — USB-C Port is for Future Use. |
|---|
| 藍牙 | — Wi-Fi 5 GHz is for Future Use. Button |
|---|
| /Factory | or reset the device 30 to factory default. — The GNDs for the UIO and DI are intercon- |
|---|
| 重設 | nected. |
|---|
| 按鈕 | — Refer to 31-00429(SmartIO Installation Instructions) for terminal wiring. |
|---|
| TECHNICAL SPECIFICATIONS | Standards Table 7. Standards |
|---|
| 防護等級 | According to final product evaluation, |
|---|
| Table 4. System Data | Class meet requirements of IP20 |
|---|
| Operating | Product CAN/CSA-E60730-1:02, Ethernet 19 to 29 Vac (50/60Hz) Standards Protocol version IEEE 802.3,BACnet Voltage (AC) Standard 135 version 1.14 Operating 23 to 29 Vdc Testing IEC68 Voltage (DC) Electrical |
|---|
| Overvoltage | Protected against overvoltages of Components |
|---|
| protected against short-circuiting. | Certification • UL60730-1 |
|---|
| • | CSA E60730-1 |
|---|
| volts. | • EN 60730-2-9 |
|---|
| 功耗 | • CAN ICES-3 (B)/NMB-3(B) RoHS II: 2011/65/EU |
|---|
| System | The system transformer(s) must be |
|---|
| 供電 | Transformer safety isolating transformers |
|---|
| Device | according to IEC 61558-2-6. In the 24 Vac 24 Vdc U.S.A. and Canada, NEC Class 2 transformers must be used. |
|---|
| Smart IO | Max. 27 VA Max. 12W |
|---|
| Mounting | DIN43880 and DIN19 compliances |
|---|
| Table 6. Operating Environment | Other Specifications |
|---|
| Ambient | -25 to 55 °C (-13 to 131 °F) Table 8. Other Specifications Operating |
|---|
| Temperature | Real-Time Clock Buffered for 72 hours by gold |
|---|
| Retention | capacitor |
|---|
| Wi-Fi and | -10 to 55 °C (14 to 131 °F) Bluetooth Operating Temperature Communication Baud Rates |
|---|
| Humidity | Ethernet port 10/100 Mbps autobaud |
|---|
| Storage | -28.9 to +70 °C (-20 to 158 °F) Wi-Fi 802.11b: up to 11Mbps |
|---|
| Vibration | 0.024” double amplitude (2 to 30 Hz), 802.11ac: up to 433Mbps |
|---|
| Under | 0.6 g (30 to 300 Hz) |
|---|
| Operation | Bluetooth BR: up to 1Mbps EDR: up to 3Mbps |
|---|
| Dust, Vibration | According to EN60730-1 BLE: up to 1Mbps |
|---|
| RFI, EMI | Commercial, light, industrial, |
|---|
| residential environments | NOTES: |
|---|
| — | Ethernet Ports are for Future Use. |
|---|
| MTBF (Mean | 11.5 years — Wi-Fi 5 GHz is for Future Use. Time Between Failure) 5 31-00427 | Rev.10-20 |
|---|
| Restrictions in the 5 GHz band | Restrictions dans la bande de 5 GHz canal(MSS). Table 10. Smart IO Part Numbers |
|---|
| Part Number | Description |
|---|
| IO-10MIXR-NWE | Wireless Smart IO with North American conformance |
|---|
| IO-10MIXR-WE | Wireless Smart IO with European and Latin America conformance Table 11. Accessories Part Numbers |
|---|
| ANT-REM | screw mounted base. 1.5 meter (4.9 feet) cable length for remote mounting of the antenna. Includes Ferrite Ring. (Pack of 4) Local antenna for wireless communication. IO-ANT-LOC (Pack of 5) Table 12. Remote Antenna Part Numbers |
|---|
| CA #ANTT935-4 | ADAM External 2.4 GHz: 2.9dbi 5 GHz: 5.9dbi |
|---|
| GW.05.0113W | TAOGLAS External 2.4 GHz: 2.57dbi 5 GHz: 1.38dbi 105 mm (4.13”) 110 mm 130.7 mm 45 mm (4.33”) (5.15”) (1.77”) 57.5 mm (2.26”) 7 31-00427 | Rev.10-20 |
|---|
| GENERAL SAFETY | It is suitable for panel rail mounting on 35 mm standard panel rail (both horizontal and vertical rail mounting |
|---|
| INFORMATION | possible). The Smart IO is used for the purpose of building HVAC start-up), all manufacturer instructions and in for installation on or in appliances. particular the Installation and Commissioning Instructions (EN1B-0206IE10) are to be observed. Table 13. Safety Information as per EN60730-1 disconnect modules, and the auxiliary terminal packages) may be installed and mounted only by Electric Shock |
|---|
| authorized and trained personnel. | Protection |
|---|
| Pollution Degree | Pollution Degree 2, suitable for use followed. in industrial environments. manufacturer, all warranties concerning operation and Installation Safety class: Evaluated in final |
|---|
| safety are invalidated. | product observed at all times. Examples of such regulations are Overvoltage AC 230V for relay: Category II VDE 0800 and VDE 0100 or EN 60204-1 for earth Category grounding. |
|---|
| has been approved by Honeywell. | Voltage 2500V AC for Relay output (DO) temperature for at least 24 hours before applying power. This is to allow any condensation resulting from Automatic Type 1.B(micro-disconnection for low shipping/storage temperatures to evaporate. Action relay) lockable cabinet) ensuring that unauthorized persons Software Class Class A have no access to the terminals. 60730-1,UL-916, and UL60730-2-9. evaluati |
|---|
| serviceable parts inside! | Test parts 2014/35/EU and EMC Directive 2014/30/EU. applied with voltage-carrying parts, for indoor use only. |
|---|
| Electromagnetic | Tested at 230 Vac, with the |
|---|
| Interference | modules in normal condition. |
|---|
| light-industrial environments. | Transformer transformers according to IEC61558-2-6 |
|---|
| control system with fixed wiring. | transformers ® U.S. Registered Trademark |
|---|
| customer.honeywell.com | © 2020 Honeywell International Inc. 31-00427 | Rev.10-20 |
|---|
