AML-SERIES-ROCKER-SWITCHES 香港哪裡有代理？

HKEZIT 提供原廠行貨連保養，AML-SERIES-ROCKER-SWITCHES 原廠行貨連保養，提供上門安裝、佈線及網絡設定一站式服務，全港 32 區均有服務。

此設備適合什麼工程場景？

詳細規格請參閱上方規格表；我們會按現場點位數量、距離及功率需求設計網絡架構，並提供整體方案報價。

安裝後有問題如何跟進？

原廠行貨保養，工程另設保養期；網絡設備我們會預先設定好即插即用，日後有問題可遠程協助或上門檢查。

AML-SERIES-ROCKER-SWITCHES 定 HE-SERIES-SEALED-SWITCH 邊個好？

兩者主要規格分別：USA/Canada方面，AML-SERIES-ROCKER-SWITCHES 係 +302 613 4491 005439-2-EN | 2 | 04/21，HE-SERIES-SEALED-SWITCH 係 +1 302 613 4491。實際邊個型號更適合，需視乎現場環境同需求而定，可先比較 HE-SERIES-SEALED-SWITCH 詳細規格，或直接聯絡我們免費現場評估，由工程師建議最合適方案。

AML-SERIES-ROCKER-SWITCHES 保養、維修邊度做？

HKEZIT 提供 AML-SERIES-ROCKER-SWITCHES 原廠行貨連保養，安裝後如有故障可直接聯絡我們安排上門維修，毋須自行聯絡原廠。詳情請參閱網絡 WiFi安裝工程頁面或聯絡我們查詢保養範圍。

HONEYWELL AML-SERIES-ROCKER-SWITCHES 網絡設備安裝・保養

Name: HONEYWELL AML-SERIES-ROCKER-SWITCHES AML Series Issue 2
Brand: Honeywell
SKU: AML-SERIES-ROCKER-SWITCHES

詳細規格

AML20 Series	AML30 Series AML41 Series AML42 Series AML45 Series
switch	switch indicator indicator indicator 19,0 x 19,0 mm 19,0 x 19,0 mm 19,0 x 19,0 mm
Square housing	– –
[0.75 x 0.75 in]	[0.75 x 0.75 in] [0.75 x 0.75 in] 19,0 x 29,0 mm 19,0 x 29,0 mm 19,0 x 29,0 mm 6,35 x 19,0 mm 8,9 x 29,0 mm
[0.75 x 1.14 in]	[0.75 x 1.14 in] [0.75 x 1.14 in] [0.25 x 0.75 in] [1.14 x 0.35 in] 2,79 x 0, 52 mm [0.110 x 0.020 in] quick connect or solder terminals Optional, 0,64 x 0,64 mm [0.025 x 0.025 in] printed circuit board terminals 4,75 x 0,52 mm [0.187 x 0.020 in] quick connect or solder terminals
Pushbutton	Form C; 1PDT,
normally open	– – – double break Form X, 2PST
Form C; 1PDT,	Form A, 1PST,
Paddles	– – – 2PDT, 4PDT 2PST
Rockers	– – – 2PDT, 4PDT 2PST, Form C, 1PDT,
Key operated selectors	– – – – 2PDT
Contact material	Silver alloy, optional gold contacts, or optional gold-plated silver contacts
Lamp options	Incandescent T 1¾ wedge base, Integral LED or neon, LED T 1¾ wedge base
Electrical/mechanical	AML20 Series AML30 Series AML41 Series AML42 Series AML45 Series
life	switch switch indicator indicator indicator 6,000 cycles 6,000 cycles – – – 6,000 cycles 6,000 cycles – – –
Contact Material	Voltage Current (amps) Load type 24 Vdc 2 Resistive
Silver or gold-plated silver	125 Vac 3 Inductive, 0.75 PF 250 Vac 2 Inductive, 0.75 PF
Gold	125 Vac/Vdc 0.1 Resistive Table 3. AML30 Series Electrical Ratings (Power Duty)
Switch type (silver contacts)	Voltage Current (amps) Load type
Pushbuttons	125/250 Vac 10 Inductive, 0.6 PF
Operator with Integral	Table 4. AML21 Series Unlighted Pushbutton Catalog Listings PUSHBUTTONS
Contact Block (see	Standard Black Bezel (1,52 mm [0.06 in] above panel)
Circuitry, Form C	Contact Material Square Housing Rectangular Housing 1PDT momentary Silver AML21BBA2AA AML21EBA2AA 2PDT momentary Silver AML21BBA2AC AML21EBA2AC 4PDT momentary Silver AML21BBA2CC AML21EBA2CC 1PDT alt-action Silver AML21BBA2AB AML21EBA2AB 2PDT alt-action Silver AML21BBA2AD AML21EBA2AD 4PDT alt-action Silver AML21BBA2CD AML21EBA2CD 1PDT momentary Gold AML21BBA2BA AML21EBA2BA 2PDT momentary Gold AML21
Complete Unit	1PDT momentary Gold-plated silver contacts AML21BBA2EA – 2PDT momentary Gold-plated silver contacts AML21BBA2EC – Full Guard Black Bezel (5,0 mm [0.19 in] above panel)
connect or	2PDT momentary Gold AML21HBA2BC – solder terminals Table 5. AML31 Series Unlighted Power-duty Pushbutton Catalog Listings1 Standard Black Bezel (1,52 mm [0.06 in] above panel)
Circuitry, Form X	Contact Material Rectangular Housing 2PST normally open momentary Silver AML31EBA4AC 2PST normally open alt-action Silver AML31EBA4AD All “power-duty” pushbutton, paddle, and rocker switches (AML30 Series) have 0.187 in x 0.020 in termination UNLIGHTED
Form C Circuitry	Form X (2 Poles) (1, 2, or 4 Poles) Circuitry Difference between standard bezel and full guard bezel dimensions. Honeywell Advanced Sensing Technologies 5
AML51 Buttons for Square Housing	AML51 Buttons for Rectangular Housing
Button Color	AML51-C AML51-A AML51-B AML51-F AML51-H AML51-E (Standard) (Optional) (Optional) (Standard) (Optional) (Optional) 0.19 in button 0.32 in button 0.43 in button 0.19 in button 0.32 in button 0.43 in button
height	height height height height height One piece
.19	.32 .43
按鈕	.19 .32 .43
Red	AML51-C10R AML51-A10R AML51-B10R AML51-F10R AML51-H10R AML51-E10R
Yellow	AML51-C10Y AML51-A10Y AML51-B10Y AML51-F10Y – –
Green	AML51-C10G AML51-A10G – AML51-F10G AML51-H10G –
Blue	AML51-C10B AML51-A10B – AML51-F10B – –
White	AML51-C10W AML51-A10W AML51-B10W AML51-F10W AML51-H10W AML51-E10W
Black	AML51-C10K AML51-A10K – AML51-F10K – –
Gray	AML51-C10L AML51-A10L – AML51-F10L – –
Amber	AML51-C10A AML51-A10A AML51-B10A AML51-F10A AML51-H10A – Two piece
button (clear	0.19 0.32 0.19 0.32 0.43 0.43 cap & color insert)
.05	.05
NC NC	NC NC 20,5 15,0 12,0 10,2 18,9 0.80 0.59 .47 + .40 + 0.75
NONO	NO NO 20,5 0.80 35,5 7,6 1,5 [0.06] Pole 1 Pole 2 Pole 1 Pole 2 5,0 [0.19] 1.40 0.30 0.020 in x 0.110 in Termination 0.025 in Square Termination AML21 Series Square 12,7 12,7 15,0 1,5 to 4,75 2,5 .50 2,5 .50 0.59 [0.060 to 0.187] panel thickness
.10	.10 AML21 Standard & AML31 Power-Duty
NO	NO 20,5 15,0 C C 12,7 7,6 NC 12,7 7,6 NC
.80 .59	.50 .30 + NC .50 .30 + NC
C	C
.99	[0.060 to 0.187] panel thickness
NC	NC NC NC 12,0 18,9 10,2
.47	B 0.75 .40 B
.90	.90 25,0 1,5 to 4,75
A	C A C 20,5 15,0 12,7 7,6 + NC 12,7 7,6 + NC UNLIGHTED
B	C B C
[0.060 to 0.187] panel thickness	12,2 25,0 35,5 [1.40] .48 .99 11 21
AML21B	B A 2 AA
Incandescent	Terminal Number of Poles &
Housing	Bezel Color Lamp Type Type Contact Material
STANDARD BEZEL	2,8 mm x 0,5 mm
B Black	A No lamp
circuit	2 [0.110 in x 0.020 in] Quick-connect or Solder AA 1PDT, Momentary Square,
AML21E	unlighted 4PDT, CC Momentary FULL-GUARD BEZEL 1PDT, Alt-action AB (Push-on, Push-off) AML21H Square, unlighted 2PDT, Alt-action AD (Push-on, Push-off) AML21K Rectangular,
unlighted	4PDT, Alt-action CD (Push-on, Push-off) NOTE: Not all combinations of model codes are available. Please contact your Honeywell provider/representative for assistance. BA 1PDT, Momentary 2PDT, BC Momentary GOLD CONTACTS 4PDT, DC Momentary 1PDT, Alt-action BB (Push-on, Push-off) 2PDT, Alt-action BD (Push-on, Push-off) 4PDT, Alt-action DD (Push-on, Push-off) GOLD-PLATED SILVER EA 1PDT, UNLIGHTED Mome
WITHOUT BARRIERS	WITH SHORT BARRIERS1 WITH LONG BARRIERS1 19,05 Square 28,98 [1.141] x 23,25 [0.915] x 33,27 [1.310] x
[0.750]	19,05 [0.750] 19,05 [0.750] 19,05 [0.750] 28,98 [1.141] x 23,25 [0.915] Table 47 describes barrier options. Barriers are designed to prevent inadvertent actuation of adjacent-mounted switches. 8 sps.honeywell.com/ast PUSHBUTTONS
AML31E	B A 4 AA
Housing/Bezel	Bezel Color Lamp Type Type (Silver Contacts)
標準	No lamp 4,75 mm x 0,51 mm 2PST normally open
Rectangular,	B Black A circuit 4 [0.187 in x 0.020 in] Quick-connect AC double break, momentary
FULL-GUARD	(Push-on, Push-off) Rectangular,
AML31K	unlighted AML21 Standard & AML31 Power-Duty UNLIGHTED Honeywell Advanced Sensing Technologies 9 For incandescent lighted or unlighted pushbuttons and indicators with pushbutton style displays
AML51-C	11 R
Pushbutton Style Cap	Display Full Color or 2nd Color Split
button height	10 one-piece color cap R Red R Red (no legend) 0.32 inch Transmitted color,
AML51-A	button height 20 one-piece color cap (legend on cap)
Y	Yellow Y Yellow SQUARE Transmitted color, 0.43 inch
AML51-B* button height	11 clear cap with color insert (no legend)
G	Green G Green 0.19 inch Transmitted color,
AML51-D	with split for
AML41 two	Dead front
lamp indicator	30 (smoke gray cap with color insert)
W	* White W * White ***Projected color 0.19 inch 50 (white cap and color insert)
K	Black K Black
AML51-F	button height 0.32 inch
L	Gray L Gray RECTANGULAR
AML51-H	button height 0.43 inch
AML51-E*	button height NOTE: Not all combinations of model codes are available. 0.19 inch Please contact your Honeywell provider/representative for assistance button height Note: Dimensions include the 0.06 inch standard bezel
AML51-G	for 2 lamps -
split along	Note: Black and gray buttons not recommended for lighted displays
long axis	Available with transmitted color (10) only Not available with transmitted color (10) 0.32 inch Insert is clear when display type (50) is specified with white(W) color button height Available with display type "transmitted color" and "dead front" only AML51-Nsplit along for 2 lamps - UNLIGHTED long axis 10 sps.honeywell.com/ast
Rectangular	Rectangular Square Housing
solder terminals	2PDT momentary Gold No lamp provided AML21CBA2BC AML21FBA2BC AML21GBA2BC 2PDT momentary Gold 28 V lamp (#85) AML21CBE2BC AML21FBE2BC – Incandescent
Lamp Type (T-1	4PDT momentary Gold 28 V lamp (#85) AML21CBE2DC – – 3/4 wedge base) 1PDT alt-action Gold No lamp provided AML21CBA2BB – AML21GBA2BB 2PDT alt-action Gold No lamp provided AML21CBA2BD AML21FBA2BD AML21GBA2BD 2PDT alt-action Gold 28 V lamp (#85) AML21CBE2BD – – 4PDT alt-action Gold No lamp provided AML21CBA2DD AML21FBA2DD AML21GBA2DD 4PDT alt-action Gold 28 V lamp (#85) – – AML21GBE2DD Gold-plated si
Square Housing	Rectangular Hous- Rectangular Hous-
Circuitry. Form X	Contact Material Lamp Type Rectangular Housing, 1 lamp ckt 2PST normally open momentary (Form X) Silver No lamp provided AML31FBA4AC 2PST normally open momentary (Form X) Silver 6 V lamp (#86) AML31FBB4AC 2PST normally open momentary (Form X) Silver 28 V lamp (#85) AML31FBE4AC 2PST normally open alt-action (Form X) Silver No lamp provided AML31FBA4AD 2PST normally open alt-action (Form X) Silver 2
Red/Yellow	– – – – – – AML51-G10RY
Red/Green	– – – – – – AML51-G10RG
Red/White	– – – – – – AML51-G10RW
Yellow/Green	– – – – – – AML51-G10YG
Green/Yellow	– – – – – – AML51-G10GY
White/Red	– – – – – – AML51-G10WR
White/Green	– – – – – – AML51-G10WG
Yellow/White	– – – – – – AML51-G11YW
Green/Red	– – – – – – AML51-G11GR LIGHTED
White*	– – – AML51-F50W AML51-H50W – AML51-G50WW
White*/Blue	– – – – – – AML51-G50WB Honeywell Advanced Sensing Technologies 13 12,7 18,9 0.50 0.75 1,5 to 4,75 15,0 12,7 [0.060 to 0.187] panel thickness 0.59 1,3 1,3 0.50
AML21F	B B 2 AA
provided	2 [0.110 in x 0.020 in] Quick-connect or Solder AA 1PDT, Momentary
AML21C	1 lamp circuit 0,64 mm x 0,64 mm 2PDT, SILVER CONTACTS 6 V Lamp Rectangular,
E	(#85) AB (Push-on, Push-off)
FULL-GUARD BEZEL	2PDT, Alt-action
Square,	AD (Push-on, Push-off)
AML21J	1 lamp circuit 4PDT, Alt-action Rectangular, CD (Push-on, Push-off)
AML21L	1 lamp circuit Rectangular,
AML21M 2 lamp circuits	BA 1PDT, Momentary 2PDT, BC Momentary GOLD CONTACTS 4PDT, DC Momentary 1PDT, Alt-action BB (Push-on, Push-off) 2PDT, Alt-action BD (Push-on, Push-off) 4PDT, Alt-action
GOLD-PLATED SILVER	DD (Push-on, Push-off) EA 1PDT, Momentary LIGHTED 2PDT, EC Momentary 1PDT, Alt-action EB (Push-on, Push-off) 2PDT, Alt-action ED (Push-on, Push-off)
AML31F	B B 4 AA
AML31L	1 lamp circuit 28 V Lamp
lamp ckt	ckt 2PST normally open momentary (Form X) Silver 125 Vac, Red AML32FBB4AC – Button (see Table 14) 2PST normally open momentary (Form X) Silver 2PST normally open alt-action (Form X) 2PST normally open alt-action (Form X) Silver Silver 125 Vac, Clear 125 Vac, Red 125 Vac, Clear AML32FBK4AC AML32FBB4AD AML32FBK4AD AML32FBB7AD AML32FBK7AD 2PST normally open alt-action (Form X) Silver 125 Vac Green –
Integral Neon Circuit	WITHOUT BARRIERS 1,5 to 4.75 12,2 11 12 2,0 [0.060 to 0.187] panel thickness 1,0 0.48 0.08 0.04 11 21
SUPPLY	LOAD 9,4 6,8 0.27 Neon .37 28,98 [1.141] x 19,05 [0.750] 12 22 21 22 14,8 35,5 4,8 28,8 [1.13] WITH SHORT BARRIERS 0.58 1.40 0.19 Independent Neon Circuit 1,5 [0.06] 5,0 [0.19] 11 12 30,5 1.20 SUPPLY 0.020 x 0.187 LOAD Termination 25,0 33,27 [1.310] x 19,05 [0.750] 0.99 21 22 WITH LONG BARRIERS 20,5 15,0 0.80 0.59 8,1 1 Table 47 describes barrier options. 0.32 Barriers are designed to prevent inad
typ.	of adjacent-mounted switches. NOTE: Top of Full Guard Bezel Housings
are 0.19 in from Panel	28,98 [1.141] x 23,25 [0.915] 18 sps.honeywell.com/ast PUSHBUTTONS
AML32F	B B 4 AC
Integral Neon Lamp	Terminal Number of Poles
Housing (Bezel)	Bezel Color Voltage/Color Type (Silver Contacts)
Quick-connect with	(Push-on, Push-off) integral lamp circuit Rectangular,
AML32L 1lamp	K CLEAR
neon	125 Vac circuit
P	250 Vac
AML52-N	10 R
Rectangular Housing	Type Color Transmitted color, AML52-N 0.19 inch
for assistance.	G Green
Contact Block	LED Description Square Housing (see Tables 15 & 16)
Supply Voltage	1 LED with Diode
Button (see Table 17)	1PDT momentary Silver 5V Red AML22CBC2AA AML22CBC8AA 1PDT momentary Silver 5V Yellow AML22CBJ2AA – 1PDT momentary Silver 5V Green AML22CBS2AA – 1PDT momentary Gold 5V Green AML22CBS2BA – 1PDT momentary Silver 15 V Red AML22CBE2AA – 1PDT momentary Silver 15 V Yellow AML22CBL2AA –
• 0.110 in x	1PDT momentary Silver 24 V Green AML22CBX2AA AML22CBX8AA 0.020 in quick 1PDT momentary Gold 24 V Green AML22CBX2BA –
LED Description	Square Housing
.50	.50 0.30 [0.060 to 0.187] panel thickness 5,1 5,1 1,3 .20 1,3 .20
.20	.20
AML22C	B B 2 AA
LED Color &	Terminal Number of Poles &
AML22J	1 LED D 10 Vdc 8 [0.110 x 0.020 in] Quick-connect or CC Momentary
lamp circuit	solder w/ diode protection 1PDT, Alt-action
F	24 Vdc AD (Push-on, Push-off) CD (Push-on, Push-off) AML22 Standard H Vdc*
the current to a nominal 20 mA	J 5 Vdc BA 1PDT, Momentary YELLOW
M 24 Vdc	1PDT, Alt-action BB (Push-on, Push-off) 2PDT, Alt-action
R	Vdc* BD (Push-on, Push-off) 4PDT, Alt-action
S	5 Vdc DD (Push-on, Push-off) GREEN GOLD-PLATED SILVER INTEGRAL LED 10 Vdc EA 1PDT, Momentary
W 15 Vdc	2PDT, EC Momentary
X	24 Vdc 1PDT, Alt-action EB (Push-on, Push-off) 2PDT, Alt-action ED (Push-on, Push-off) Honeywell Advanced Sensing Technologies 23
AML52-C	10 R
AML52-A	button height Y Yellow NOTE: Not all combinations of model codes are available. G Green Please contact your Honeywell provider/representative for assistance.
No. of	Contact Circuits Circuits
Paddle Switch Cat. Listings	Rocker Switch Cat. Listings
Poles	Material Left Position Right Position 1PDT Silver 1-2 2-3 AML23EBA2AA01 AML24EBA2AA01
Silver	1-2 Mom. 2-3 – AML24EBA2AA02
Unlighted	Lighted Unlighted
①	① + ① ① 3 6 3 6 12 6 5 11 5 A B 4 10 4 2 5 2 3 9 3 2 8 2 1 4 1 1 7 1 Honeywell Advanced Sensing Technologies 25 Table 19. Unlighted (3 Pos) AML23 Series Paddle and AML24 Series Rocker Switches Catalog Listings Square Housing
No. of Contact	Circuits Circuits Circuits Paddle Switch Cat. Rocker Switch Cat.
Poles Material	Left Position Center Position Right Position Listings Listings 1PDT Silver 1-2 OFF 2-3 AML23EBA2AA04 AML24EBA2AA04
Mom.	Mom. 1 MICRO SWITCH identification on this side of switch housing Note: All switch positions are maintained except where noted as Mom. (momentary) *These two pole switches have the six switch terminals in line on rear of housing Table 20. Power-duty Unlighted (2 Position) AML33 Series Paddle and AML34 Series Rocker Switches1 (Maintained) Square Housing UNLIGHTED
Contact	Circuits Circuits
No. of Poles	Paddle Switch Cat. Listings Rocker Switch Cat. Listings
材質	Left Position Right Position 1PST normally
Cover Color	AML53-E Series (1/2 Cover) (Two Required) AML53-T Series (Two-Piece Cover)
Blue/White	– – AML54-T10BW Honeywell Advanced Sensing Technologies 27 Figure 15. AML23 and AML24 Series Dimensions, mm [in] or mm/in 30° TYP 15° TYP 15,0
TYP	1,5 0.59 TYP 0.06 0.025 Square 25,4 30,5 Termination TYP 1.00 1.20 8,10±0,76 TYP 20,5
ONE AND TWO POLE	12,7 Termination 10,2 Termination .50
FOUR POLE	TYP TYP 9 3 9 3
Termination	0.079 Panel Cutouts for AML20 and AML30 Series Paddles and Rockers 3,45 WITHOUT BARRIERS WITH SHORT BARRIERS1 TYP 0.136 8,4 TYP 9,7 28,98 [1.141] x 19,05 [0.750] 33,27 [1.310] x 19,05 [0.750] TYP 0.38 WITH LONG BARRIERS1 Unlighted 28,98 [1.141] x 23,25 [0.915] Table 47 describes barrier options. Barriers are designed to prevent inadvertent actuation of adjacent-mounted switches. Honeywell Advanced
UNLIGHTED	AML23 & AML24 \| AML33 & AML34 Power-Duty PADDLE & ROCKER
AML23E	B A 2 AA 01
Housing Type: Paddle	Bezel Color Lamp Type Type and Contact Material and Action2
SILVER	GOLD 2,8 mm x 0,5 mm CONTACTS CONTACTS
No lamp	maintained
NOTE: Not all combinations of model codes	[0.025 in x 0.025 in] AC BC (unlighted 02 Right: maintained 3 push-on or printed circuit switches only) are available. Please contact your Honeywell
provider/representative for assistance.	maintained
CA	DA Two SPDT TWO POSITION 03 Left: Right: momentary 2 q
Reference Table 18 or 19.	Four SPDT
CC	DC (unlighted
switches only)	Left: maintained 04 Center: maintained Right: maintained Left: momentary 05 Center: maintained Right: momentary q The “MICRO SWITCH”
identification is shown	Left: maintained 06 Center: maintained
on this side of the	Right: momentary switch housings Left: momentary maintained Figure 17. AML23 Series Unlighted Paddle Switches Nomenclature THREE POSITION 07 Center: Right: maintained
AML24E	B A 2 AA 01
Housing Type: Rocker	Bezel Color Lamp Type Type and Contact Material and Action2
q	CC DC (unlighted
AML33E	B A 4 AA 01
AA	01 Left: Right: maintained Two SPSTNO
AML34E	B A 4 AA 01
AML53-E	10 W
AML53-T	11 R G
Paddle-Style	Display 1/2 cover or 1-side Req’d if ordering
Cover	Type of 2-piece cover two-piece cover 1/2 cover Transmitted color,
per switch)	(no legend)
Two-piece	Transmitted color
AML54-T	11 R G Full Rocker, 1/2 Rocker
Rocker Style	Display or 1-side Req’d if ordering UNLIGHTED
AML54-F	Full rocker 10 one-piece color cap R Red R Red (no legend) 1/2 rocker Transmitted color
AML54-E	(two required per switch) 11 (clear cap with color insert)
+	= (see Tables 23 & 24) 0.020 quick connect or solder terminals Table 23. Incandescent Lighted AML23 Series Paddle and AML24 Series Rocker Switches Catalog Listings (2 Position) Lamp A
	1 Lamp B
Lamp "A"	Lamp "B" Notes
ONE POLE	12,7 TYP Termination 2 0.020 X 0.110 2 0.50 Termination 1 1
TWO POLE 0.020 X 0.110	3 3
LIGHTED	AML23 & AML24 Standard PADDLE & ROCKER
AML23F	B B 2 AA 01
CONTACTS	CONTACTS
circuits	6 V lamp 0,64 mm x 0,64 mm Left: momentary & B)
AML23G 2(Alamp	B [0.025 in x 0.025 in] CA DA Two SPDT 02 Right: maintained (#86) 3 push-on or printed circuit 14 V lamp maintained
Reference Table 23 and 24.	04 Center: Right: maintained Lamp B Left: momentary 05 Center: maintained, Right: momentary
q The “MICRO SWITCH”	Left: maintained
switch housings	Left: momentary maintained, THREE POSITION 07 Center: Right: maintained
AML24F	B B 2 AA 01
AML24G 2(Alamp	B [0.025 in x 0.025 in] CA DA Two SPDT 02 Right: maintained (#86) 3 push-on or printed circuit 14 V lamp maintained
Lamp B	Right: momentary Left: maintained 06 Center: maintained, Right: momentary q The “MICRO SWITCH” Left: momentary
Paddle Style	Display 1/2 Cover or 1-Side Req’d if ordering
AML33F	B B 4 AA 01
AML34F	B B 4 AA 01
gray cap with	Green Green color insert) ***Projected color 50 (white cap and color insert)
Contact Neon Lamp,	cuit Termination, Circuits Circuits Paddle Switch Cat. Rocker Switch Cat.
Material Voltage, & Color Independent or	Left Position Right Position Listings Listings Integral Table 30. AML55 Series Paddle Switch Covers without Legend for AML35 Series Neon Lighted Paddle Switches
Lens Color	Cover Color AML55-N Series Full Cover with Lens INTEGRAL NEON
Clear	Red AML56-N10TR
Lighted	10,00 Rocker MAX
Neon	0.395 3,0 TYP 0.12 3,0 1,5 TYP 0.12 20,5 0.06 0.80 8,10±0,76 TYP 0.319±0.030 15° TYP 25,4 30,5 30° TYP TYP 1.00 5,0 1.20 0.2 15,0 TYP 0.59 14,6 MAX
[0.060 in to 0.187] in panel thickness	1.39 Paddle INTEGRAL NEON Panel Cutouts for AML20 and AML30 Series Paddles and Rockers 5,1 TYP 0.20
AML35F	B B 4 AA 01
Neon Lamp	Terminal Number of Poles Operator Action
quick-connect with	AA independent lamp
independent lamp circuit	circuit, type 4 Red NOTE: Not all combinations of model codes
[0.187 in x 0.020 in]	AC (Form A) are available. Please contact your Honeywell 7 quick-connect with
Reference Table 29.	Green
Lamp A	P
AML36F	B B 4 AA 01
INTEGRAL NEON	AML35 & AML36 Power-Duty PADDLE & ROCKER Figure 36. AML55 Covers for AML35 Series Paddle Switches and AML56 Buttons for AML36 Series Rocker Switches with Neon Display Nomenclature
AML55-N	10 R G
Paddle Switch Cover or	Display Lens Color Cover/Button
Rocker Switch Button	Type (for neon window) Color Full paddle cover
AML55-N with window for	10 Transmitted
顏色	T Clear R Red neon display Full rocker button
AML56-N with window for	R Red Y Yellow neon display NOTE: Not all combinations of model codes are available. G Green Please contact your Honeywell provider/representative for assistance.
LED with color as noted	Notes
Supply voltage for	Circuits Circuits Circuits
integral LED with color	Left Center Right Notes
for 1 LED	without LED ton (for one LED)** ton (for two LEDs)
LED Lighted	0.395 Rocker AML25 & AML26 Standard 3,0 0,99 TYP TYP 15,0 0.12
TWO POLE	0.020 X 0.110 3 3
INTEGRAL LED	AML25 & AML26 Standard PADDLE & ROCKER
AML25F	B B 2 AA 01 B
LED	Terminal Number of Poles Operator Position
quick-connect or solder	Right: maintained 0,64 mm x 0,64 mm
[0.025 in x 0.025 in]	Left: momentary
AML25G 2 lamp circuits	C 5 Vdc 3 CA DA Two SPDT 02 Right: maintained Y Yellow Y Yellow push-on or printed circuit 2,8 mm x 0,5 mm maintained
D 10 Vdc	[0.110 in x 0.020 in] 03 Left:
Right: momentary	G Green G Green TWO POSITION 8 quick-connect or solder
provider/representative for assistance	04 Center: maintained Right: maintained *An appropriate external series resistor must be F 24 Vdc Left: momentary added to the LED circuit to limit the current 05 Center: maintained Right: momentary
to a nominal 20 mA	LED A
Reference Tables 32, 33, and 34	identification is shown Right: momentary
LED B	on this side of the Left: momentary
AML26F	B B 2 AA 01 B
One SPDT	Left: maintained
AML26G 2 lamp circuits	C 5 Vdc 3 [0.025 in x 0.025 in] CA DA Two SPDT 02 Right: maintained Y Yellow Y Yellow push-on or printed circuit maintained
[0.110 in x 0.020 in]	Right: momentary TWO POSITION 8 quick-connect or solder with diode protection Figure 39. AML26 Series Nomenclature
AML55-H	10 G G 1/2 cover with LED
Paddle Switch	Display or LED side Other side of
Cover or Rocker Type	Type of 2 piece 2-piece 1/2 cover
AML55-E1 with LED	10 Transmitted
AML55-T	cover for 1 LED
for	G Green G Green
AML56-E	2 with LED window Two-piece
AML56-T	button for 1 LED
AML56-H	button for 2 LEDs L Gray L Gray To order a 1/2 button without a LED window, specify INTEGRAL LED Honeywell Advanced Sensing Technologies 55 Key Code (3 digit
number marked	Catalog Listing
• Catalog Listing	1PDT Silver Center BA (110) 2-3 1-2 Mom. AML27ABK2AA23BA
with 0.110 x	1PDT Silver Center BK (101) 2-3 1-2 Mom. AML27ABK2AA23BK 0.020 quick 1PDT Silver Center & Right BA (110) 2-3 1-2 AML27ABK2AA22BA connect or 1PDT Gold Center & Right BA (110) 2-3 1-2 AML27ABK2BA22BA solder terminals
• Includes two	1PDT Silver Center & Right BB (109) 2-3 1-2 AML27ABK2AA22BB
keys with switch	2PDT Silver Center BA (110) 2-3, 5-6 1-2, 4-5 AML27ABK2AC21BA 2PDT Gold Center BA (110) 2-3, 5-6 1-2, 4-5 AML27ABK2BC21BA 2PDT Silver Center BB (109) 2-3, 5-6 1-2, 4-5 AML27ABK2AC21BB 2PDT Gold Center BB (109) 2-3, 5-6 1-2, 4-5 AML27ABK2BC21BB 2PDT Silver Center & Right BA (110) 2-3, 5-6 1-2, 4-5 AML27ABK2AC22BA 2PDT Silver Center & Right BB (109) 2-3, 5-6 1-2, 4-5 AML27ABK2AC22BB 2PDT Silver Cent
Key Code (3	Circuits Circuits Circuits
digit number	Left Position Center Right Position Catalog Listing
marked on key)	(CCW) Position (CW) 2PDT Silver Center BB (109) 2-3, 4-5 2-3, 5-6 1-2. 4-5 AML27ABK2AC24BB
Key Code	3 Digit number marked on key Catalog Listing
BA	110 30PA101-AML
BB	109 30PA102-AML 56 sps.honeywell.com/ast 35,5 KEYSWITCH 1.40 1,5 1,5 4,8 0.06 5 0.06 0.187 7,60±0,80 15,0 5 (2) Panel Thickness 0.300±0.031 0.59 (2) max. (2) 5,0 0.19
NOTES:	27,7 1.09 1 Not All Key Combination Codes Are Available 2 Silver and Gold Contact Options 3 One Pole and Two Pole Options 4 One Pole Circuitry Not Furnished with 3 Position Units 5 E.S.D. Conductor Location
Panel Cutout	Termination AML 27 Series AML27 0,75 Max R (4) 0.030 1 4 1 4 10,2 12,0 2 5 0.47 2 5 0.40 3 6 3 6 19,0±0,15 12,7 12,7
Square	0,65 0.750±0.005 0.50 2,80 0,50 0.50 0.025 X
Released Position	Operated Position
Circle 1-2 Open	Circle 1-2 Closed 1 Pole
Circle 2-3 Closed	Circle 2-3 Open
Circle 1-2, 4-5 Open	Circle 1-2, 4-5 Closed 2 Pole
“30”	“31” Circle 2-3, 5-6 Closed Circle 2-3, 5-6 Open 3 Position, CW-MOM 60° 3 Position, CW-MOM 60° 90° Maint. CCW 90° Maint. CCW
Key Out In Center	Key Out In
and CCW Positions	CCW Position Three Position Units
CCW	Center CW
Circle 1-2, 5-6 Open	Circle 1-2, 4-5 Open Circle 1-2, 4-5 Closed 2 Pole
Circle 2-3, 4-5 Closed	Circle 2-3, 5-6 Closed Circle 2-3, 5-6 Open
“28”	“29” 3 Position, Maint. 3 Position, Maint. 90° CW, 90° CCW 90° CW, 90° CCW
and CW Positions	and CCW Positions
“27”	“26” “21” “22” “23” “24” “25” 3 Position, CCW-MOM 60° 3 Position Maint. 2 Position Maint. 2 Position Maint. 2 Position, MOM 3 Position, Maint. 3 Position, MOM 90° Maint. CW 90° CW, 90° CCW 90° CW 90° CW, Key Out In 60° CW 90° CW, 90° CCW 60° CW and 60° CCW
AML27	BK 2 AA 24 BA
Terminal	Number of Poles Operator Action and Key Code
Housing Type	Bezel Color Type and Contact Material Key Withdrawal* (# marked on key)
Unlighted,	Black [0.110 in x 0.020 in] One SPDT Maint.* Maint. 110
AC	BC are available. Please contact your Honeywell
Honeywell provider	24 Maint. Maint.* Maint. 25 Mom. Maint.* Mom. 26 Maint* Maint.* Maint.* 27 Mom. Maint.* Maint.* 28 Maint. Maint.* Maint.* THREE POSITION 29 Maint.* Maint.* Maint. 30 Maint.* Maint.* Mom. 31 Maint.* Maint. Mom. 2 & 3 POSITION AML27 KEYSWITCH
指示燈	Table 39. AML41 Series Button-Style Indicator Catalog Listings (Incandescent lamps) (see Tables 39 & 40) Replaceable Incandes-
No lamp provided	AML41CBA2 AML41DBA2 AML41FBA2 AML41GBA2 28 V lamp (#85) AML41CBE2 AML41DBE2 AML41FBE2 AML41GBE2 AML41C Series indicator, select AML51-C style button per Table 42 Button
AML51-J Series	AML51-K Series AML51-L Series • 0.110 in x 0.020 in quick Lens cap for 1 lamp ckt Lens cap for 2 lamps circuits Lens cap for 3 lamp circuits
Transmitted	AML51-C Series AML51-D Series AML51-F Series AML51-G Series
AML41C	B B 2
cap and	Black Black 0.19 inch color insert)
AML51-K	11 R
Lens Style Cap	Display Full Color or 2nd Color Split 3rd Color Split (for indicators only) Type 1st Color Split (if required) (if required) 0.2 in cap Transmitted color,
AML51-J	height for 1 10 one-piece color cap R Red R Red R Red
lamp indicators	(no legend) 0.2 in cap Transmitted color,
height for 2	11 clear cap with color Y Yellow Y Yellow Y Yellow
short axis)	Dead front 0.2 in cap 30 (smoke gray cap with color insert)
AML51-L	lamp indicators (split along *Projected color 50 (white cap and B Blue B Blue B Blue
Indicator with integral	Table 43. AML42 Series Indicators with Integral LED and 0.110 x 0.020 quick connect or solder terminals
AML42S Series with	AML42S Series with series button ordered
integral lens	integral lens separately from table
Supply Voltage (dc) LED Color	below
Button (see Table 44)	V* Red – AML42SBB2 –
V*	Yellow – AML42SBH2 –
with LED display	24 Green – AML42SBX2 AML42SBX8 (see Table 43) The LED does not include an internal resistor. A suitable external resistor must be added to the LED circuit for a nominal current of 20 mA *Catalog listing includes diode protection. Reference Table 48. Table 44. AML52 Series Buttons without Legends for AML42C Series LED Indicators
.30	[0.060 to 0.187] panel thickness .20 .20 1,3 1,3 2,5 0.10 0.05 0.05 20,5 + 0.80 3,5 0.14 20,5 0.80 1,5 35,5 8,1 0.06 1.40 0.32 1,3 1,3 0.05 0.05 7,6 0.30 20,5 10,1 10,1 1,5 0.40 0.40 0.80 0.06 0.020 x 0.110 in and 0.025 in Square Termination AML42 INTEGRAL LED Honeywell Advanced Sensing Technologies 67
AML42C	B B 2
Compact,	0,64 mm x 0,64 mm
AML42S	1 LED C 5 Vdc 3 [0.025 in x 0.025 in] Push-on or Printed Ckt. lamp circuit 2,8 mm x 0,5 mm RED
must be added to the LED circuit to limit	F 24 Vdc the current to a nominal 20 mA H Vdc*
J	5 Vdc YELLOW
T	10 Vdc W 15 Vdc
Rectangular Housing Full	Rectangular Housing Split Screen 2 LEDs with diode
Screen 2 LEDs	Screen 2 LEDs
Full Screen Insert Color	Catalog Listing
Freeport IL USA	17,8 30,5 28,70 0.70 7,6 1.20 1.129 0.30
AML 59	AML 45 Series 5,1 0.20 10,1 0.40 4,8 35,5 7,60 0.19 1.40 0.300 AML45 0,50 2,80
Catalog Listing	Type Description Note
AML71SCB1	Center Short barrier for use with square devices or short – side of rectangular devices
AML71SEB1	End –
AML71LCB1	Center – Long barrier for use with long side of rectangular devices
AML71LEB1	End – Pushbutton panel seal for lighted or unlighted Operating temperature, 0 °C to
AML75ABC	Std. bezel
square pushbutton 0.19 in high	55 °C [32 °F to 131 °F] Pushbutton panel seal for lighted or unlighted Operating temperature, 0 °C to Accessories
AML75BBC	Std. bezel
rectangular pushbutton 0.19 in high	55 °C [32 °F to 131 °F] Clear switch guard cover for square 0.19 in May be locked with 0.020 wire AML76C10T01P Std. bezel
height pushbuttons	for additional protection Clear switch guard cover for rectangular 0.19 in May be locked with 0.020 wire AML76F10T01P Std. bezel
AML78CB	Std. bezel Square panel plug, black matte finish Same height as the "Std" bezel
AML78FB	Std. bezel Rectangular panel plug, black matte finish Same height as the "Std" bezel
AML91LA86	– 6.3 V incandescent T-1 3/4 wedge base lamp #86 Lamp
AML91LA73	– 14 V incandescent T-1 3/4 wedge base lamp #73 Lamp
AML91LA85	– 28 V incandescent T-1 3/4 wedge base lamp #85 Lamp
Red LED, T-1 3/4 wedge base lamp	*Requires external series
AML92ERL	Six chip
High intensity	current limiting resistor
Green LED, T-1 3/4 wedge base lamp	*Requires external series
AML92EGL	Six chip
Yellow LED, T-1 3/4 wedge base lamp	*Requires external series
AML92EYL	Six chip
White LED, T-1 3/4 wedge base lamp	*Requires external series
AML92EWL	Six chip
Table 48. Integral LEDs	LED Application Information
LEDs Furnished	For those devices without internal Peak Inverse Voltage
Permanently	current limiting resistors, suitable
V1	I1 VPD
Installed in These	Without Diode With Diode external control of the LED current must
Products	Protection Protection be provided. It is recommended that a
AML 22, 25, 26, 42	2.4 V 20 mA 0.7 V 5V 34 V minimum of 5 Vdc open circuit voltage
AML45	2.4 V 20 mA 0.7 V 4V 33 V with an appropriate series resistance be used to drive LED devices. This 100,000 hours (half life) minimizes the effect of temperature (current variation) on forward voltage of the LED. AML92 SERIES LEDs For use with these AML switches and indicators equipped with Resistor values can be determined by
lamp sockets:	supply voltage or current for LED:
•	Pushbuttons switches: AML21 rectangular and square,
and AML31	RS E - Vf
If	E Vf
Table 49. AML92 Operating Characteristics	Vf = Forward Voltage of LED If = Circuit Current
IF	VR VF Forward Voltage (typ.)
Forward	Reverse If a diode is added in series for
類型	Yellow Green Red White Current Voltage reverse polarity protection, then:
Six chip	4V 4V 4V 4V 50 mA 5.6 V RS = E - Vf - VPD Operating Temperature Range: -20 °C to 60 °C [-4 °F to 140 °F] Storage Temperature Range: -30 °C to 100 °C [-22 °F to 212 °F] Where: VPD = Forward Voltage of Protection Diode 74 sps.honeywell.com/ast PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in persona
For more information	through our literature and the Honeywell web site, it is buyer’s
Honeywell Advanced Sensing Technolo-	sole responsibility to determine the suitability of the product in
gies services its customers through a	the application.
worldwide network of sales offices and	Specifications may change without notice. The information we
distributors. For application assistance,	supply is believed to be accurate and reliable as of this writing.
current specifications, pricing or the	However, Honeywell assumes no responsibility for its use.
International	+815 618 3231
USA/Canada	+302 613 4491 005439-2-EN \| 2 \| 04/21
sps.honeywell.com/ast	© 2021 Honeywell International Inc. All rights reserved.