HONEYWELL BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 安裝、保養、維修

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE

裝ALARM | 裝防盜 | 裝警鐘 — 硬件連工程一站式

產品簡介

Honeywell BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 為Issue 2,HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準,歡迎聯絡我們查詢 BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 香港價格連安裝報價。

  • Characteristic:Min. Max. Unit
  • Supply voltage (Vsupply):-0.3 6.0 Vdc
  • Voltage on any pin:-0.3 Vsupply + 0.3 V Digital interface clock frequency:
  • I2C:100 400 kHz
  • SPI:50 800
HKEZIT 提供原廠行貨保養。硬件連專業安裝、設定及使用教學一站式報價,無需自行研究安裝與設定。我們同時承接裝ALARM、裝防盜、裝警鐘工程,硬件與工程同一團隊負責。
查詢價格連安裝
BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE Honeywell Issue 2 產品圖片

詳細規格

CharacteristicMin. Max. Unit
Supply voltage (Vsupply)-0.3 6.0 Vdc
Voltage on any pin-0.3 Vsupply + 0.3 V Digital interface clock frequency:
I2C100 400 kHz
SPI50 800
ESD susceptibility (human body model)2 — kV
儲存溫度-40 [-40] 85 [185] °C [°F] Soldering time and temperature:
lead solder temperature (DIP)4 s max. at 250°C [482°F] peak reflow temperature (Leadless SMT, SMT) 15 s max. at 250°C [482°F] Absolute maximum ratings are the extreme limits the device will withstand without damage. ABP Series Datasheet | automation.honeywell.com | 2 TABLE 2. ENVIRONMENTAL SPECIFICATIONS
all external surfaces0 %RH to 95 %RH, non-condensing internal surfaces of Liquid Media Option (T, V, B, C, F, G) 0 %RH to 100 %RH, condensing internal surfaces of Dry Gases Option (N, D) 0 %RH to 95 %RH, non-condensing
Vibration15 g, 10 Hz to 2 kHz
Shock100 g, 6 ms duration
Life11 million pressure cycles minimum
Solder reflowJ-STD-020E, MSL 2 (see shelf/floor life)
Shelf lifeUnlimited storage life, inside sealed moisture barrier bag 1 year flood life, after removal from sealed moisture bag, Floor life2 <30°C & <60 %RH Certification (silicone gel coating option: Port 1 only) NSF-169, BPA Free, LFGB Life may vary depending on specific application in which the sensor is used. Floor life, the maximum recommended time period after removal from a moisture barrier bag or dry
ComponentPressure Port 2 (P2)
Dry Gas OptionLiquid Media Option
Ports and covershigh temperature polyamide
Metal gel ring— 304 SST —
Substratealumina ceramic — alumina ceramic
Adhesivesepoxy, silicone epoxy, silicone gel epoxy, silicone
Electronicsilicon, glass, gold,
silicon
componentsaluminum Contact Honeywell Customer Service for detailed material information. TABLE 4. SENSOR PRESSURE TYPES
Pressure TypeDescription
GageOutput is proportional to the difference between applied pressure and atmospheric (ambient) pressure.
DifferentialOutput is proportional to the difference between the pressures applied to each port (Port 1 – Port 2). ABP Series Datasheet | automation.honeywell.com | 3
AnalogDigital
Min.Typ. Max. Min. Typ. Max. 3.3 Vdc 3.0 3.3 3.6 3.0 3.3 3.6 Vdc 5.0 Vdc 4.75 5.0 5.25 4.75 5.0 5.25 3.3 Vdc — 2.1 2.8 — 3.1 3.9 mA 5.0 Vdc — 2.7 3.8 — 3.7 4.6 mA
sleep mode option— — — — 1 10 µA
Operating temperature range4-40 [-40] — 85 [185] -40 [-40] — 85 [185] °C [°F]
Compensated temperature range5 0 [-32] — 50 [122] 0 [-32] — 50 [122] °C [°F]
Temperature output option6
Startup time (power up to data ready)— — 5 — — 3 ms
Response time— 1 — — 0.46 — ms
upper— — 97.5 — — — %Vsupply
lower2.5 — — — — —
low— — — — — 20 %Vsupply
high— — — 80 — —
Pull up on SDA/MISO, SCL/SCLK, SS— — — 1 — — kOhm
Total Error Band7
Accuracy 9— — ±0.25 — — ±0.25 %FSS BFSL 0.03 — — — — — %FSS
decimalhex 0 0 0x0000 10 1638 0x0666 50 8192 0x2000 90 14746 0x399A 100 16383 0x3FFF Analog Versions Compensated Pressure Range 100 Output (%Vsupply) 60 Ideal 1.5% Total Error Band 0 1 2 3 4 5 6 7 8 9 10
Pmin.Pmax. Pressure (example unit) 0.8 x Vsupply
Output (V) =x (Pressureapplied – Pmin.) + 0.10 x Vsupply Pmax. – Pmin. Digital Versions Compensated Pressure Range 100 Output (% of 214 counts) 60 Ideal 1.5% Total Error Band 0 1 2 3 4 5 6 7 8 9 10
Output (% of 214 counts) =x (Pressureapplied – Pmin.) + 10% Pmax. – Pmin. Transfer Function “A” is shown. See Figure 3 for other available transfer functions. ABP Series Datasheet | automation.honeywell.com | 5 For example, ABPDNNN150PGAA3 defines an ABP Series Amplified Basic Pressure Sensor, DIP package, NN pressure port, dry gases only, no diagnostics, 150 psi gage pressure range, analog output type, 10% to 90% of Vsupp
ABPD NN N 150PG A A 3
Product SeriesSupply Voltage 3 3.3 Vdc ABP Amplified Basic 5 5.0 Vdc Transfer Function3 Package
D DIP (Dual Inline Pin)10% to 90% of Vsupply (analog), 2 counts (digital) A no temperature output, no sleep mode M SMT (Surface Mount Technology) 10% to 90% of 214 counts (digital only)
L Leadless SMTD temperature output enabled, sleep mode enabled 10% to 90% of 2 counts (digital only)
Pressure PortS no temperature output, sleep mode enabled
DIPSMT Leadless SMT 10% to 90% of 2 counts (digital only)
NNNo port NN No port NN No port T temperature output enabled, no sleep mode Output Type
AAnalog 3 I2C, Address 0x38
SSPI 4 I2C, Address 0x48
Single axialSingle axial Single axial 0 I2C, Address 0x08 5 I2C, Address 0x58
ANbarbed port AN barbed port AN barbed port 1 I2C, Address 0x18 6 I2C, Address 0x68 2 I2C, Address 0x28 7 I2C, Address 0x78 Pressure Range1, 2 60 mbar to 10 bar 6 kPa to 1 MPa 1 psi to 150 psi
LNbarbless port LN barbless port LN barbless port 100MD ±100 mbar 010KD ±10 kPa 005PD ±5 psi 160MD ±160 mbar 016KD ±16 kPa 015PD ±15 psi 250MD ±250 mbar 025KD ±25 kPa 030PD ±30 psi 400MD ±400 mbar 040KD ±40 kPa 060PD ±60 psi 600MD ±600 mbar 060KD ±60 kPa 001BD ±1 bar 100KD ±100 kPa
Single radialSingle radial 1.6BD ±1.6 bar 160KD ±160 kPa
JNbarbless port JN barbless port 2.5BD ±2.5 bar 250KD ±250 kPa 004BD ±4 bar 400KD ±400 kPa
Dual radialDual radial
JJbarbless ports, JJ barbless ports, 250MG 0 mbar to 250 mbar 025KG 0 kPa to 25 kPa 030PG 0 psi to 30 psi
same sidesame side 400MG 0 bar to 400 mbar 040KG 0 kPa to 40 kPa 060PG 0 psi to 60 psi 600MG 0 bar to 600 mbar 060KG 0 kPa to 60 kPa 100PG 0 psi to 100 psi 001BG 0 bar to 1 bar 100KG 0 kPa to 100 kPa 150PG 0 psi to 150 psi 1.6BG 0 bar to 1.6 bar 160KG 0 kPa to 160 kPa 2.5BG 0 bar to 2.5 bar 250KG 0 kPa to 250 kPa 004BG 0 bar to 4 bar 400KG 0 kPa to 400 kPa
RNbarbed port RN barbed port 006BG 0 bar to 6 bar 600KG 0 kPa to 600 kPa 010BG 0 bar to 10 bar 001GG 0 kPa to 1 MPa Product Option N Dry gases only, no diagnostics D Dry gases only, diagnostics on
RRDual radial
barbed ports,barbed ports,
Pressure RangePressure Range Overpressure1 Burst Pressure2 Common
UnitMode 1 psi to 150 psi Differential Gage 6 kPa to 1 MPa Differential Gage ABP Series Datasheet | automation.honeywell.com | 7 TABLE 7. PRESSURE RANGE SPECIFICATIONS (CONTINUED)
[0.29][0.32] 4,0 2,54 Typ.
[0.16][0.100] 2X 1,45 3,63 (options: B, C) 4 5 6 [0.143] [0.057] 6 5 4 3,23 (options: T, V, F, G) [0.127] 2,95 (options: N, D) 5,5 [0.116] [0.22] 6,3
[0.25]11,5 11,0
[0.45][0.43] 3 2 1 1,0 1 2 3
[0.04]8,6 0,25 Typ.
[0.34][0.010] 3,81 [0.150] 6X 0,46 [0.018] 7,3 8,0
[0.03[0.133] [0.085] 8,0 4,65 3,10 (options N, D) [0.32] [0.183] 1,88 (options N, D) 4 5 6 [0.122] 6 5 4 [0.074] 4,45 [0.175] 6,3 11,5
ø1,88[0.43]
[0.074]0,25 Typ. [0.010] 1,0 3 2 1 [0.04] 1 2 3 8,6 7,3 [0.34]
[0.057][0.100] 3,81 [0.150] 6X 0,46 [0.018] ABP Series Datasheet | automation.honeywell.com | 10 0,7 8,0 3,38 (options: T, V, F, G) [0.32] 5,06 (options: T, V, F, G)
Port 14,45
[0.175]2X ø1,88 [0.074] 2,10 6,3 Port 1 11,5 11,0
[0.083][0.25] [0.45] [0.43] Port 2
Port 24,45 [0.175] 3 2 1 1,0 1 2 3
[0.149]8,0 2,01 (options: T, V, B, C, G, F) 4,0 [0.32]
[0.141][0.100] [0.058] [0.068] 3,30 (options: N, D) 4 5 6 [0.129] 6 5 4 ø1,60 [0.063] 3,10 4,55
[0.122][0.179] 6,3 11,5 11,0
ø2,100,25 Typ. [0.083] [0.010] 1,65 3 2 1 8,6 1 2 3 [0.065] 7,3 [0.34]
[0.109][0.187] 4,55 2X ø1,75
[0.075][0.25] 11,5 [0.43]
[0.127]8,0 4,0
[0.22]0,25 Typ. [0.010] 6,3 11,0
[0.17]2,54 Typ. 2X 1,45
[0.100][0.057] 7,3 7,00
[0.276][0.143] 8,0
ø2,746X 1,28
[0.108]ø2,32 [0.050]
ø1,91[0.091] [0.075] 1,0 3 2 1 [0.04] 4,2 1 2 3
[0.116][0.32] 0,25 Typ. 6 5 4 4 5 6 [0.010] 5,5 [0.22] 11,0 6,3 ø5,00 2,68 11,5 [0.43]
[0.183][0.133] 2,54 Typ. 1,47 [0.085] 3,10 (options: N, D) [0.100] [0.058] 1,88 (options: N, D)
[0.03][0.188] 4.45 2X 1,88
Port 2 [0.45][0.43]
[0.129][0.057] 4,75 4 5 6 6 5 4 [0.187] ø1,60
[0.063]ø1,75
[0.069]4,55 [0.179] 6,3 11,5 11,0
[0.160][0.018] 3,80 (options: N, D) [0.150] 3,78 (options: B, C) 8,0
[0.187][0.16] 3,30 (options: N, D) [0.187]
[0.14]2,95 (options: N, D)
[0.12]3,00 7,0 6,3 [0.25]
[0.118]6X 1,25 [0.28] [0.049] 6 5 4 4 5 6 2,5 Typ. 1,5 7,3 [0.10]
ø2,324 5 6
[0.091]2,5 Typ. 1,5 7,3
[0.10][0.06] 8,0 [0.32]
Output TypePin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6
analogGND NC Vout NC NC Vsupply
Gage reference hole: do not plugGage reference hole: do not plug 6X ø0.73 0,65 Gage reference hole: do not plug 1 2 3 [0.029] [0.026] 1,30 [0.051] 1 2 3 6,00 6,00
[0.236]8,85 4,00
[0.157]1 2 3 11,00 3,25 [0.28] 11,25 11,0 0.128]
[0.443][0.433] 8,00
[0.433]6 5 4 [0.315] 3,00 5,00 12,35 [0.118] 5,00 [0.315]
[0.197][0.197] 6 5 4 2,73 2,50 6 5 4 [0.098] [0.107] 2,54 8,00 2,73 2,73 2,54 [0.315]
[0.107][0.1] [0.107] [0.1] 8,00 8,00
[0.315][0.315] ABP Series Datasheet | automation.honeywell.com | 14
m WARNINGm WARNING
PERSONAL INJURYIMPROPER INSTALLATION Honeywell warrants goods of its manufacture as being free of defective
DO NOT USE these products as safety• Consult with local safety agencies
or emergency stop devices or in anyand their requirements when materials and faulty workmanship
other application where failure of thedesigning a machine-control link, during the applicable warranty period.
product could result in personal injury.interface and all control elements Honeywell’s standard product warranty
that affect safety.applies unless agreed to otherwise by Failure to comply with these
Strictly adhere to all installation
instructions could result in death orHoneywell in writing; please refer to your instructions.
serious injury.order acknowledgment or consult your
Failure to comply with theselocal sales office for specific warranty instructions could result in death or details. If warranted goods are returned serious injury. to Honeywell during the period of coverage, Honeywell will repair or replace,
MISUSE OFthat Honeywell, in its sole discretion, finds defective. The foregoing is buyer’s DOCUMENTATION sole remedy and is in lieu of all other
product sheet is for reference only.warranties, expressed or implied,
Do not use this document as aincluding those of merchantability
product installation guide.and fitness for a particular purpose.
and maintenance informationfor consequential, special, or indirect is provided in the instructions damages. supplied with each product.
For more informationis believed to be accurate as of this
Honeywell Sensing Solutions serviceswriting. However, Honeywell assumes no
its customers through a worldwideresponsibility for its use.
USA/Canada+302 613 4491
Latin America+1 305 805 8188
Europe+44 1344 238258
Japan+81 (0) 3-6730-7152
Singapore+65 6355 2828
Greater China+86 4006396841
Richardson, TX 7508132305128-2-EN | 2 | 06/24
www.honeywell.com© 2024 Honeywell International Inc. All rights reserved.

* 規格以原廠最新 Datasheet 為準。

下載完整PDF規格書

防盜報警安裝工程服務

HKEZIT 專營裝ALARM、裝防盜、裝警鐘工程,BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 由我們供貨、安裝、調試到使用教學一站式完成。無論裝ALARM、裝防盜或裝警鐘,均由自家工程團隊上門施工,品質有保證。

裝ALARM裝防盜裝警鐘

防盜報警適合邊類專業客戶

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE Honeywell Issue 2亦適合以下專業服務機構使用,保安同合規要求同一般商鋪唔一樣,歡迎查詢度身方案。

律師事務所

客戶機密文件與會議記錄保安需求高,門禁分級、CCTV存證、通話錄音缺一不可。

WhatsApp 查詢 →

信託公司/家族辦公室

私人會議室同資料保存區極高保密規格,保障客戶身份同資產私隱。

WhatsApp 查詢 →

眼科診所

精密激光同檢查儀器防盜,診症室私隱合規佈點,配合預約系統減少候診糾紛。

WhatsApp 查詢 →

心臟科診所

心電圖同貴重心臟監測儀器防盜,診症室私隱合規佈點,配合預約系統。

WhatsApp 查詢 →

牙科診所

診症室私隱合規佈點、X光及貴重牙科儀器防盜,配合預約系統減少候診糾紛。

WhatsApp 查詢 →

會計師行

審計旺季外勤同事考勤管理、財務資料室保安,同會計師行嘅合規要求相符。

WhatsApp 查詢 →

常見問題

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 香港哪裡有代理?

HKEZIT 提供原廠行貨連保養,BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 原廠行貨連保養,提供上門評估、安裝、防區設定及使用教學一站式服務,全港 32 區均有服務。

此設備適合什麼場景?

詳細規格請參閱上方規格表;我們會按現場環境(商舖、辦公室、倉庫、住宅)設計防區及感應器布局,並提供整體方案報價。

觸發警報後如何通知?

可按需求配置本地警號、手機 App 推送或短訊通知;亦可與 CCTV 聯動,觸發時自動錄影存證。

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 定 MODEL-811FM-TWO-WIRE-GAGE-ABSOLUTE-PRESS 邊個好?

兩者屬同系列產品,實際應該邊個型號更適合,需視乎現場環境同需求而定。歡迎直接聯絡我們免費現場評估,由工程師建議最合適方案。

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 保養、維修邊度做?

HKEZIT 提供 BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 原廠行貨連保養,安裝後如有故障可直接聯絡我們安排上門維修,毋須自行聯絡原廠。詳情請參閱防盜報警安裝工程頁面或聯絡我們查詢保養範圍。

香港安裝服務地區

HKEZIT 於全港各區提供 BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE Honeywell Issue 2供貨連專業安裝服務(裝ALARM、裝防盜、裝警鐘),熱門地區包括:上水防盜報警系統安裝中環防盜報警系統安裝九龍城防盜報警系統安裝九龍灣防盜報警系統安裝佐敦防盜報警系統安裝元朗防盜報警系統安裝北角防盜報警系統安裝土瓜灣防盜報警系統安裝。港島、九龍、新界全港 32 區均有上門安裝,歡迎聯絡我們查詢 BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 香港價格連安裝報價。

防盜報警適用場景

BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE Honeywell Issue 2適合多種場景使用,以下為部分常見安裝場景,歡迎查詢是否適合您的現場環境。

查看更多防盜報警適用場景,請參閱 防盜報警安裝工程

相關產品

如需整套防盜報警方案,請參閱 防盜報警安裝工程

查詢 BASIC-ABP-SERIES-BOARD-MOUNT-PRESSURE-SE 連安裝價格

免費上門評估,即日報價,原廠行貨保養

立即查詢