| Diameter | B501A: 104 mm (4.1"); B210LPA: 155 mm (6.1"); B224BIA, B224RBA, B200SRA, B200SA: 175 mm (6.875") |
|---|
| Wire Gauge | B224BIA, B224RBA, B200SRA, B200SA, B210LPA, B501A: 24 to 12 AWG |
|---|
| Temperature Range | 0°C to 49°C (32°F to 120°F ); B501A, B210LPA: –20°C to 66°C (–4°F to 150°F ) |
|---|
| Humidity Range | 10% to 93% RH non-condensing |
|---|
| B224RBA/B224BIA Electrical Ratings | B200SRA/B200SA Electrical Ratings |
|---|
| Operating Voltage | 15 to 32 VDC (powered by SLC) External Supply Voltage 16 to 33 VDC (VFWR) |
|---|
| Standby Current | 170/450 µA max. Standby Current 500 µA max. |
|---|
| Set Time (B224RBA only) | Short Delay: 60 to 100 msec Long Delay: 6 to 10 sec |
|---|
| Relay Characteristics | 2 coil latching relay Sound Output High Volume: Greater than 87 dBA, |
|---|
| UL/ULC Rating: | measured in a ULC anechoic room at 10 0.5 A @ 125 VAC feet, 24 Volts (in continuous tone) 0.9 A @ 125 VDC |
|---|
| Alarm Current | 35 mA max. 3 A @ 30 VDC |
|---|
| Single | 3.5" 4" 4" 4" 50 60 70 75 |
|---|
| B501A | No Yes No No Yes Yes Yes Yes No |
|---|
| B200SRA/B200SA | Yes Yes † |
|---|
| Yes | Yes Yes† |
|---|
| No | No Yes No |
|---|
| B210LPA | Yes Yes Yes Yes Yes No No Yes No |
|---|
| B224RBA | Yes Yes Yes Yes Yes No No Yes No |
|---|
| B224BIA | Yes Yes Yes Yes Yes No No Yes No B200SA is not compatitble with the 200 Series junction boxes |
|---|
| Ordering Information, 200 Series Bases | B200SA Addressable Sounder Base |
|---|
| B200SRA | Standard Sounder Base sounder base provides unmatched flexibility to configure the output (Compatible with B501BHA Series) to various events. When combined with System Sensor SpectrAlert® |
|---|
| B200SA | Intelligent Addressable Sounder Base Advance notification appliances, the B200SA can serve as a |
|---|
| SMB600 | Surface Mounting Kit (flanged) |
|---|
| F110 | Accessory Flange Ring for 6" Base • S imple addressing scheme - base adopts the same address as |
|---|
| F210 | Accessory New Smaller Flange Ring for 6” Base attached sensor |
|---|
| RA100ZA | Remote LED Annunciator • Synchronizable with SpectrAlert Advance notification appliances |
|---|
| M02-04-01 | Detector Test Magnet • Four standard tone patterns at two selectable volumes |
|---|
| M02-09-00 | Test Magnet with Telescoping Handle |
|---|
| XR2B | Detector Removal Tool (T55-127-000 included) • Custom tone capability |
|---|
| XP-4 | Extension Pole for XR2B (5 to 15 ft.) • Support for Temporal-4 CO annunciation |
|---|
| T55-127-000 | Detector Removal Head |
|---|
| BCK-200B | Black Detector Kit • Remote silence capability |
|---|
| WCK-200B | White Detector Kit 6-6581 Kitimat Rd • Mississauga, ON L5N 3T5 ©2012 System Sensor. |
|---|
| Phone: 800-SENSOR2 • Fax: 905-812-0771 | Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. |
|---|
| www.systemsensor.ca | CMDS00600-1 • 1/12 |
|---|
