HONEYWELL CS-2516 防盜報警安裝・保養

Name: HONEYWELL CS-2516 • Transmitter/receiver built into same unit.
Brand: honeywell
SKU: CS-2516

產品簡介

honeywell CS-2516 為• Transmitter/receiver built into same unit.，HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準，歡迎聯絡我們查詢 CS-2516 香港價格連安裝報價。

Acceptable：Acceptable feet (70 to 100 m) using optional
靈敏度：Percent Display DISTANCE between DISTANCE
between：BEAMLRK kit.
Setting：Obscuration Reading
detector and：detector and

HKEZIT 提供原廠行貨保養。硬件連專業安裝、設定及使用教學一站式報價，無需自行研究安裝與設定。我們同時承接裝ALARM、裝防盜、裝警鐘工程，硬件與工程同一團隊負責。

查詢價格連安裝 →

CS-2516 honeywell • Transmitter/receiver built into same unit. 產品圖片

詳細規格

Acceptable	Acceptable feet (70 to 100 m) using optional
靈敏度	Percent Display DISTANCE between DISTANCE
between	BEAMLRK kit.
Setting	Obscuration Reading
detector and	detector and
reflector (ft)	reflector (m) Adjustment angle
Level 1	25% 25 16.4 to 120 5.0 to 36.6 ±10° horizontal and vertical. Note that
Level 2	30% 30 25 to 150 7.6 to 45.7 the optics move independently of the unit.
Level 3	40% 40 60 to 220 18.3 to 67 Sensitivity (6 levels)
Level 4	50% 50 80 to 328 24.4 to 100 6985sens.tbl • Level 1 — 25%.
Acclimate™ Level 1	30% to 50% A1 80 to 150 24.4 to 45.7
Acclimate™ Level 2	40% to 50% A2 80 to 220 24.4 to 67 • Level 2 — 30%. • Level 3 — 40%. • Acclimate™ Level 6 — 40% to 50%.
above.	Fault condition (trouble) • Self-compensation limit reached. Alignment aid • Optical gunsight. • Integral signal strength indication. • Two-digit display. Indicators • Alarm — local red LED and remote alarm. • Trouble — local yellow LED and remote trouble. • Normal — local flashing green LED.
Reflector Mounting Guidelines	Test/reset features • Integral sensitivity test filter (BDT-SS only, requires external power supply). • Sensitivity filter (incremental scale on 6985mt1.wmf reflector). • Local alarm test switch. • Local alarm reset switch. • Remote test and reset switch (compatible with RTS451 and RTS451KEY test stations). Smoke detector spacing On smooth ceilings, 30 – 60 feet (9.1 to 18.3 m) between projected b
Page 2 of 4	BD-SS and BDT-SS CS-2516 09/01/06
Wiring	Environmental Specifications
Diagram	Temperature –22°F to 131°F (–30°C to 55°C). Humidity 10 – 93% RH noncondensing. Electrical Specifications Voltage 15 to 32 VDC. Average standby current 24 VDC: 2 mA maximum (LED flashing, g2516w1.wmf SLC @ 24 V). LED current 6.5 mA maximum. Remote annunciator current 11.2 mA maximum. Average current during testing 500 mA maximum. Alarm current 24 VDC; 8.5 mA maximum (LED on). Trouble/fault current
Switch	Add to standby current; 100 mA maximum.
Locations	Alignment mode current 24 VDC; 20 mA maximum. External supply (BDT-SS only) Voltage: 15 to 32 VDC. Current: 0.5 A maximum. Remote output (alarm) Voltage: 15 to 32 VDC. NOTE: Output voltage is the same as device input voltage. Current: 15 mA maximum, 6 mA minimum. NOTE: Output current is limited by 2.2K ohm resistor. Heater kit BEAMHK Voltage: 15 to 32 V. Current: 92 mA maximum @ 32 V (heater only)
Wiring Diagram (with RTS451/KEY)	consumption (per reflector): nominal 7.7 W @ 24 V; maximum 15.0 W @ 32 V. BD-SS / BDT-SS Mechanical Specifications Detector dimensions 10.0" H x 7.5" W x 3.3" D (254 mm H x 191 mm W x 84 mm D). Reflector dimensions For 16' to 230' (5 to 70 m) applications: 7.9" x 9.1" (200 x 230 mm). For applications beyond 230'/70 m: 15.7" x 18.1" (400 x 460 mm).
BD-SS and BDT-SS	CS-2516 09/01/06 Page 3 of 4
Alignment Adjustment Locations	Housing Screw Locations
Parts List	Ordering Information
Item	Quantity BD-SS Intelligent beam smoke detector
Transmitter/receiver unit ....... 1	BD-SSA Same as BD-SS with ULC Listing.
Paintable trim ring ................. 1	BDT-SS Intelligent beam smoke detector with integral
Plug-in terminal blocks ........... 3	BDT-SSA Same as BDT-SS with ULC Listing. tions in excess of 230 ft/70 m).
BEAMMMK	Multi-mount kit (provides ceiling or wall mount
Orange sticky paper ................ 1	capability with increased angular adjustment).
BEAMSMK	Surface-mount kit.
RTS451	Remote test station.
RTS451KEY	Remote test station with key lock.
BEAMHK	Heating kit for use with the transmitter/receiver unit of BDT-SS. For prevention of condensation.
BEAMHRK	Heating kit for use with the reflector of BDT-SS. For prevention of condensation. Gamewell-FCI 12 Clintonville Road Acclimate™ is a trademark of System Sensor, a Honeywell company. SmartScan™ is a trademark of Gamewell. Northford, CT 06472-1610 Phone: 203-484-7161 Specifications and wiring information are provided for information only and are Fax: 203-484-7118 believed to be accurate. Gamewell-FCI
www.gamewell-fci.com	Data and design are subject to change without notice. Installation and wiring instructions shipped with the product shall always be used for actual installation.
A Honeywell Company	For more information, contact Gamewell-FCI. © 2006 Gamewell-FCI
Page 4 of 4	BD-SS and BDT-SS CS-2516 09/01/06