| MEA | California State Fire Zones 1 - 10 accept two-wire smoke detectors and any normally-open contact devices. Zones 1 - 8 configured as general alarm zones. Zones 9 and 10 programmable as smoke zones or supervisory alarm zones. (Bell) Circuits (NACs). Silenceable. Non-Silenceable. Auto-Silence (program 5 to 20 minutes). batteries (batteries over 12 AH require use of the Optional flush mo |
|---|
| FireLite BB-17F battery backbox). | Optional dead-front dress panel (DP-2410B). |
|---|
| est power-limiting requirements. | two-wire, serial output for: |
|---|
| Fully programmable via built-in keypad. | Relay-by-zone capability with optional ACM-8RF. vent unauthorized access to ensure the integrity of the Optional AFM Series LED Annunciators. |
|---|
| field program information. | LDM Series Graphic Annunciator Drivers. |
|---|
| two-wire smoke detectors only). | 4XTMF transmitter module. SPECIFICATIONS termittent troubles. 120 VAC, 60 Hz, 2.3 amps. |
|---|
| test. | Wire size: minimum 14 AWG (2.0 mm²) with 600-volt insulation. Total 24 VDC system power: 3.6 amps (expandable to 6.6 amps). capability. Notification appliance (bell) circuit (NAC) power: 2.5 amps (expandable to 5.0 amps). options. Maximum current per NAC: 1.25 amps (expandable to 2.5 amps). able cabinet capable of housing up to 12 AH batteries. This document is not intended to be used for |
|---|
| Initiating Device Circuits (zones) | mon system trouble LED. Mount to 4-gang electrical box |
|---|
| Ten Style B (Class B). | ONLY. |
|---|
| Zones may be programmed for: | LDM Series: Lamp Driver Module series for use with Two-wire smoke detectors and any normally open custom graphic annunciators. contact device. Zones 1 - 8 configured as general alarm zones only. ACM-8RF: Remote Form-C relay module. Provides eight mappable Form-C relays driven by EIA-485 for relay-by- Zones 9 and 10 can be configured as smoke zones zone capability (two minimum required for re |
|---|
| Notification Appliance (Bell) Circuits | AFM/AFM-X, LDM or ACM-8RF data sheets, document numbers DF-51500, DF-51465, DF-51384, and DF-51555 respectively. |
|---|
| amps) each. | See diagrams below. |
|---|
| Silenceable. | PRODUCT LINE INFORMATION INFORMATION |
|---|
| Non-Silenceable. | MS-2410B 24-Volt, 10-zone, Class B, FACP. |
|---|
| Auto-Silence (program 5 to 20 minutes). | XRM-24 120VAC, 100 VA transformer. Expands total the latest requirements using fuseless technology. RTB Remote Trouble Buzzer. |
|---|
| Auxiliary Outputs | 4XTMF Remote station output or municipal box con- |
|---|
| Non-resettable power @ 500 mA. | LED-10IM EIA-485 port interface module. Required for |
|---|
| batteries. | TR-4-R Flush mount trim ring. rated at: 2.0 amps @ 30 VDC (resistive), 2.0 amps @ 30 with batteries over 12 AH. VAC (resistive). |
|---|
| ABS-8RF | Metal enclosure for mounting each ACM-8RF |
|---|
| EIA-485 Port, Compatible Devices | module. |
|---|
| compatible EIA-485 devices. | BAT-12180 Battery, 12 volt, 18.0 AH (two required; requires 52095box.wmf |
|---|
