| programming information. | • Detector sensitivity test capability (NFPA 72 compliant). • Point trouble identification. • PAS (Positive Alarm Sequence) and presignal delay per |
|---|
| Features | point (NFPA 72 compliant). |
|---|
| • | Listed to UL standard 864, 9th edition. SLC LOOP: |
|---|
| See wire table on page 3. | BB-26: Battery backbox, holds up to two 25 AH batteries and |
|---|
| NOTIFICATION APPLIANCE CIRCUITS (NACS): | CHG-75. output control modules (CMF-300 or CMF-300-6). CHG-75: Battery charger for lead-acid batteries with a rating main circuit board NACs with two-stage capability. teries with a rating of 55 to 120 AH. Requires additional BB- |
|---|
| • 2.5 amps maximum per each NAC circuit. | BAT Series: Batteries, see data sheet DF-52397. |
|---|
| PROGRAMMING AND SOFTWARE: | PRT/PK-CABLE: Cable printer/personal computer interface gramming. or selected from an internal library file. PRN-6F: UL listed compatible event printer. Uses tractor-fed |
|---|
| • Two programmable Form-C relay outputs. | paper. |
|---|
| • 99 software zones. | IPDACT Internet Monitoring Module: Mounts in bottom of enclosure with optional mounting kit (PN IPBRKT). Connects to primary and secondary DACT telephone output ports for front panel. internet communications over customer provided ethernet |
|---|
| linked to any zone or input point. | Central Station Receiver. Can use DHCP or static IP. (See your office using a Windows®-based software package IPBRKT: Mounting kit for IPDACT in common enclosure. (order programming kit PK-CD, containing PK-Plus, sepa- rately). Upload/download system programming locally to IPSPLT: Y-adaptor option allows connection of both panel the MS-9200UDLS(E) in less than one minute. dialer outputs to one IPD |
|---|
| User interface | ACM-8RF: Relay module provides 8 Form-C 5.0 amp relays. |
|---|
| LED INDICATORS | ACS-LED Zone Series: LED-type fire annunciators capable of |
|---|
| • AC Power (green) | providing up to 99 software zones of annunciation. Available in |
|---|
| • Fire Alarm (red) | increments of 16 or 32 points to meet a variety of applications. |
|---|
| • Supervisory (yellow) | LDM Graphic Series: Lamp Driver Module series for use with |
|---|
| • Alarm Silenced (yellow) | custom graphic annunciators. • System Trouble (yellow) |
|---|
| • Maintenance/Presignal (yellow) | LCD-80F (Liquid Crystal Display) point annunciator: |
|---|
| • Disabled (yellow) | 80-character, backlit LCD-type fire annunciators capable of |
|---|
| • Battery Fault (yellow) | displaying English-language text. |
|---|
| • Ground Fault (yellow) | NOTE: For more information on Compatible Annunciators for use with the MS-9200UDLS, see the following data sheets (document |
|---|
| KEYPAD CONTROLS | numbers) ACM-8RFACM-8R (DF-51555), ACS/ACMSeries (DF- |
|---|
| • Acknowledge/Step | 52378), LDM Series (DF-51384), LCD-80F (DF-52185). • Alarm Silence LITESPEED COMPATIBLE ADDRESSABLE DEVICES • Drill |
|---|
| • System Reset (lamp test) | All feature a polling LED and rotary switches for addressing. • 16-key alpha-numeric pad (similar to telephone keypad) CP355: Addressable low-profile ionization smoke detector. • 4 cursor keys |
|---|
| • Enter | SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector |
|---|
| Ordering Options | with thermal sensor. H355HT: Fixed high-temperature detector that activates at AD355: Low-profile, intelligent, “Adapt” multi-sensor detector BEAM355: Intelligent beam smoke detector. BEAM355S: Intelligent beam smoke detector with integral sensitivity test. D350PL: Photoelectric low-flow duct smoke detector. |
|---|
| relay option. | modules in a BB-2F cabinet (optional). Mount up to six mod- |
|---|
| provides two Style B (Class B) only IDCs. | modules on a CHS-6 chassis in a BB-6F. |
|---|
| device backbox. | modules on a CHS-6 chassis in a BB-6F. 52013), CMF-300-6 (DF-52365), CRF-300-6 (DF-52374), CMF/ |
|---|
| to power notification appliances. | Series detection devices such as the AD355, CP300/CP350, SD300(T)/SD350(T) and older modules such as the M300, M301, |
|---|
| the SMB500. | information on previous 300 Series devices. |
|---|
| ule mounted inside. | Wiring Requirements |
|---|
| operation). | interference. Wire size should be no smaller than 18 AWG |
|---|
| M301. | size depends on the length of the SLC circuit. Use the table below to determine the specific wiring requirements for the SLC. |
|---|
| SLC | Distance in Feet |
|---|
| Wire Requirements | Wire Size Wire Type |
|---|
| Protocol | (m) Belden 9583, Genesis 4410, |
|---|
| Twisted-pair, shielded | 10,000 feet(3,048 m) 12 AWG (3.31 mm2) Signal 98230, WPW D999 Belden 9581, Genesis 4408, |
|---|
| CLIP | Twisted-pair, shielded 4,875 feet (1,486 m) 16 AWG (1.31 mm2) Signal 98630, WPW D991 Belden 9574, Genesis 4402 & 4602, |
|---|
| Untwisted, unshielded wire, | 12 – 18 AWG 3,000 feet (914 m) |
|---|
| in or out of conduit | (3.31 mm2 – 0.821 mm2) Non-Plenum (FPLR): Genesis 4315, Belden 5020UL |
|---|
| Twisted-pair, unshielded | 10,000 feet (3,048 m) 12 AWG (3.31 mm2 ) Plenum (FPLP): Genesis 4515, Belden 6020UL Non-Plenum (FPLR): Genesis 4313, Belden 5120UL |
|---|
| System Capacity | 16.65" (42.29 cm.) wide x 5.20" (13.34 cm.) deep. Trim Ring (TR-CE): 22.00" (55.88 cm.) high x 19.65" (49.91 cm.) wide. |
|---|
| Electrical Specifications | Temperature and Humidity Ranges |
|---|
| holds maximum of two 18 AH batteries. | ture ranges and humidity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room temperature of 15 – 27°C/60 – 80°F. – AUXILIARY (Automatic, Manual and Waterflow) (requires |
|---|
| VAC (resistive). Form-C relays. | (Where a DACT is not accepted, the alarm, trouble and |
|---|
| Power-limited. | – PROPRIETARY (Automatic, Manual and Waterflow). 9200UDLS control panel. In some cases, certain modules may |
|---|
| PBX (digital) type phone line extensions. | • FM approved • CSFM: 7165-0075:208 |
|---|
| Cabinet Specifications | • MEA: 120-06-E LiteSpeed™ is a trademark; and FireLite® Alarms is a registered trademark of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. ©2008 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to kee |
|---|
