| and 240 VAC versions of the panels. | • Real-time clock/calendar with daylight savings time control. • History log with 256 event storage. |
|---|
| Features | • Piezo sounder for alarm, trouble and supervisory. |
|---|
| • | Listed to UL Standard 864, 9th edition. • 24 volt DC operation. |
|---|
| Circuit). | – Strobe Synchronization |
|---|
| PROGRAMMING AND SOFTWARE: | Notification Appliance and Releasing Circuit(s) - TB5 and TB7 or selected from an internal library file. • Four Output Circuits. verter module. • Special Application power. |
|---|
| front panel. | • Supervised and power-limited circuitry. |
|---|
| linked to any zone or input point. | • Maximum Signaling Current: 7.0 amps (3.0 amps special application, 300 mA regulated maximum per NAC). • End-of-Line Resistor: 4.7K Ohms, 1/2 watt (PN 71252). • Max. Wiring Voltage Drop: 2 VDC. Refer to the Fire•LiteDevice Compatibility Document for com- adjustments. patible listed devices. Form-C Relays - Programmable - TB8 • Relay 2 (factory default programmed as fail-safe Trouble Relay). • Rel |
|---|
| LED INDICATORS | Relay). |
|---|
| CONTROL BUTTONS | a power supply, which is compatible with open collector cir- |
|---|
| • ACKNOWLEDGE | cuits. |
|---|
| • ALARM SILENCE | Special Application Resettable Power - TB9 |
|---|
| • SYSTEM RESET (lamp test) | • Operating Voltage: Nominal 24 VDC. |
|---|
| • DRILL | • Maximum Available Current: 500 mA - appropriate for |
|---|
| AC Power – TB1 | powering 4-wire smoke detectors (see note 1). |
|---|
| • MRP-2001: 120 VAC, 60 Hz, 3.66 amps. | • Power-limited Circuitry. patible listed devices. |
|---|
| tion. | NOTE: Total current for resettable power, nonresettable power and Output Circuits must not exceed 7.0 amps. |
|---|
| Battery (sealed lead acid only) – J12: | Special Application Resettable or Nonresettable Power - TB9 VDC @ 1.4 amp. Supervised, nonpower-limited. • Operating Voltage: Nominal 24 VDC. 18 Amp Hour batteries can be housed in the FACP cabinet. • Power-limited Circuitry. Larger batteries require separate battery box such as the • Jumper selectable by JP31 for resettable or nonresettable |
|---|
| BB-26 or BB-55). | power. |
|---|
| • Minimum Battery Size: 7 Amp Hour. | Refer to the Fire•Lite Device Compatibility Document for com- |
|---|
| Initiating Device Circuits - TB4 and TB6 | patible listed devices. |
|---|
| System Capacity | useful life of the system's standby batteries and the electronic components may be adversely affected by extreme tempera- this system and its peripherals be installed in an environment |
|---|
| Electrical Specifications | with a normal room temperature of 15 – 27°C/60 – 80°F. |
|---|
| amps. | NFPA Standards 2.085 amps. Alarm Systems requirements: tion, supervised, nonpower-limited. – NFPA 15 Water Spray Fixed Systems – NFPA 16 Deluge Foam-Water Sprinkler and Foam-Water |
|---|
| Cabinet Specifications | Spray Systems Agency Listings and Approvals The listings and approvals below apply to the basic MRP- |
|---|
| Weight: 20.7 lbs. (9.4 kg) | 2001(E) and MRP-2001(E)E fire alarm control panels. In some |
|---|
| 尺寸 | cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory for lat- |
|---|
| – Height 20.00" (50.80cm) | est listing status. – Width 22.50" (57.15cm) |
|---|
