| control function. | • ANN-BUS for connection to optional devices (one or 2 of any of the following): |
|---|
| Features | – ANN-RLY Relay Module |
|---|
| • Listed to Standard ULC-S527-99. | – ANN-LED Annunciator Module (built-in) |
|---|
| and 2001. | • Real-time clock/calendar with daylight savings time control. |
|---|
| ments. | • Piezo sounder for alarm, trouble and supervisory. |
|---|
| • Extensive transient protection. | • Low AC voltage sense. |
|---|
| • Dual hazard operation. | • Outputs Programmable for: timers. • NACs programmable for: – Silence Inhibit – Auto-Silence Circuit). – Strobe Synchronization – Selective Silence (horn-strobe mute) |
|---|
| cial application power). | – Temporal or Steady Signal |
|---|
| • Strobe synchronization: | – Silenceable or Non-silenceable |
|---|
| – System Sensor | – Release Stage Sounder |
|---|
| – Wheelock | • Automatic battery charger with charger supervision. |
|---|
| – Gentex | • Optional Trim Ring TR-CE (red) for semi-flush mounting the cabinet. – Faraday • Optional CAC-5X Class A Converter Module for Outputs – Amseco and IDCs. • Optional 4XTMF Municipal Box Transmitter Module. DF-60443:B1 • 06/14/2011 — Page 1 of 4 411UDAC). • End-of-Line Resistor: 4.7K Ohms, 1/2 watt (PN 71252). |
|---|
| PROGRAMMING AND SOFTWARE: | Refer to the Fire•Lite Device Compatibility Document for listed compatible devices. or selected from an internal library file. Notification Appliance and Releasing Circuit(s) - TB5 and |
|---|
| • Programmable Abort operation. | TB7 verter module. |
|---|
| front panel. | • Special Application power. |
|---|
| linked to any zone or input point. | • Normal Operating Voltage: Nominal 24 VDC. |
|---|
| USER INTERFACE: | • Maximum Signaling Current: 7.0 amps (3.0 amps maximum per NAC). • End-of-Line Resistor: 4.7K Ohms, 1/2 watt (PN 71252). • Max. Wiring Voltage Drop: 2 VDC. adjustments. Refer to the Fire•Lite Device Compatibility Document for com- patible listed devices. Form-C Relays - Programmable - TB8 • Relay 1 (factory default programmed as Alarm Relay) |
|---|
| Controls and Indicators | • Relay 2 (factory default programmed as fail-safe Trouble Relay) |
|---|
| LED INDICATORS | • Relay 3 (factory default programmed as Supervisory Relay) |
|---|
| • | FIRE ALARM (red). • Relay Contact Ratings: |
|---|
| CONTROL BUTTONS | Special Application Resettable Power - TB9 |
|---|
| • ACKNOWLEDGE. | • Operating Voltage: Nominal 24 VDC. |
|---|
| • ALARM SILENCE. | • Maximum Available Current: 500 mA - appropriate for |
|---|
| • SYSTEM RESET (lamp test). | powering 4-wire smoke detectors (see note). |
|---|
| • DRILL. | • Power-limited Circuitry. |
|---|
| AC Power – TB1 | Refer to the Fire•Lite Device Compatibility Document for com- |
|---|
| • MRP-2002C: 120 VAC, 60 Hz, 3.66 amps. | patible listed devices. |
|---|
| tion. | Output Circuits must not exceed 7.0 amps. |
|---|
| • Supervised, nonpower-limited. | Special Application Resettable or Nonresettable Power - |
|---|
| Battery (sealed lead acid only) – J12: | TB9 VDC @ 1.4 amp. Supervised, nonpower-limited. • Maximum Available Current: 500 mA (see note 1). 18 Amp Hour batteries can be housed in the FACP cabinet. • Jumper selectable by JP31 for resettable or nonresettable Larger batteries require separate battery box such as the power. |
|---|
| BB-26 or BB-55). | Refer to the Fire•Lite Device Compatibility Document for com- |
|---|
| • Minimum Battery Size: 12 Amp Hour. | patible listed devices. |
|---|
| System Capacity | ity. Therefore, it is recommended that this system and its peripherals be installed in an environment with a normal room |
|---|
| Electrical Specifications | NFPA Standards 3.66 amps Alarm Systems requirements: – NFPA 12 CO2 Extinguishing Systems (High Pressure tion, supervised, nonpower-limited Only) – NFPA 12A Halon 1301 Extinguishing Systems – NFPA 12B Halon 1211 Extinguishing Systems – NFPA 72 National Fire Alarm Code for Local Fire Alarm Systems and Remote Station Fire Alarm Systems (requires an optional Remote Station Output Module) – NFPA 2001 C |
|---|
| 尺寸 | Agency Listings and Approvals |
|---|
| – Height 50.80cm | The listings and approvals below apply to the basic MRP- |
|---|
| – Width 57.15cm | 2002C control panel. In some cases, certain modules may not |
|---|
| – Depth 21.59cm | be listed by certain approval agencies, or listing may be in pro- cess. Consult factory for latest listing status. |
|---|
| Temperature and Humidity Ranges | • ULC: S624 FireLite® Alarms® and System Sensor® are registered trademarks of Honeywell International Inc. ©2011 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for For more information, contact Fire•Lite Alarms. installation purposes. We try to keep our prod- (888) 289-1114 uct information up-t |
|---|
| change without notice. | www.firelite.com |
|---|
