| • Built-in digital communicator. | • Two independently programmable output circuits. Circuits can be configured for the following outputs: – Style Y (Class B). |
|---|
| circuits (NACs). | – Door Holder Service (cannot be used for notification appliances). |
|---|
| Wheelock® devices. | – Aux Power Source (cannot be used for notification appli- ances). |
|---|
| relay. | • Silence Inhibit and Auto-silence timer options. |
|---|
| • Drift compensation. | • Continuous or Temporal code. |
|---|
| • Walk-test. | • Up to 2.0 A total output power, 1.0 A for auxiliary power and door holder. Each circuit can source up to the total system faster installation time. Programming and Software • Auto-learn JumpStart® feature for easy programming reduces installation time. panel’s built-in browser; no programming software is panel’s built-in browser. (Requires PC with MS Internet |
|---|
| required. | Explorer or Mozilla Firefox and standard Cat5e Ethernet cable) |
|---|
| DCL Communication | • 5 programmable zones (combination of alarm / supervisory) ments (DCLA, DCLB, DCLC). addressable detectors and modules). lent Fire•Lite detectors and modules. DF-60704:A1 • 9/16/2011 — Page 1 of 4 |
|---|
| User Interface | KEYPAD CONTROLS |
|---|
| status. | • Silence |
|---|
| • | Reset (Lamp Test) |
|---|
| Product Line Information | 007860: DACT Phone Cord (2 required) |
|---|
| tions. | interference. Refer to the panel manual for wiring details. Canadian DF-60704:A1 • 9/16/2011 — Page 3 of 4 |
|---|
| System Capacity | Temperature and Humidity Ranges |
|---|
| Electrical Specifications | peripherals be installed in an environment with a normal room temperature of 15 – 27°C. minimum 14 AWG (2.00 mm²) with 600 V insulation. Non- |
|---|
| power-limited, supervised. | Agency Listings and Approvals maximum of two 7 AH batteries. Larger batteries require a control panel. In some cases, certain modules may not be separate battery cabinet, such as the BB-26 or BB-55F. listed by certain approval agencies, or listing may be in pro- |
|---|
| • Notification Appliance Circuits: | • ULC Listed: S624 (DAYRC, UOJZC) – Terminal Strip provides connections for two NACs, Style Y Note: For versions used outside Canada, see DF-60702. (Class B). |
|---|
| – Maximum signaling current: 2.0 A. | NFPA Standards – End-of-Line Resistor: 4.7 kOhm, ½ watt (P/N 71252 UL The MS-25C complies with the following NFPA 72 Fire Alarm listed) for Style Y (Class B) NAC. Refer to the MS-25C Systems requirements: manual for listed compatible devices. – LOCAL (Automatic, Manual, Waterflow and Sprinkler |
|---|
| • Standby Current: 135 mA | Supervisory). |
|---|
| • Alarm Current: 220 mA | – AUXILIARY (Automatic, Manual and Waterflow) (requires |
|---|
| limited | – REMOTE STATION (Automatic, Manual, Waterflow and |
|---|
| Relay: | the alarm, trouble and supervisory relays may be con- – Contact rating: 2.5 A @ 24 VDC (resistive). nected to ULC listed transmitters. – Form-C relays, nonpower-limited, nonsupervised. – PROPRIETARY (Automatic, Manual and Waterflow). – CENTRAL STATION (Automatic, Manual and Waterflow, |
|---|
| Physical Specifications | and Sprinkler Supervised). Fire•Lite® Alarms®, JumpStart®, and System Sensor® are registered trademarks of Honeywell International Inc. ©2011 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for For more information, contact Fire•Lite Alarms. installation purposes. We try to keep our prod- (888) |
|---|
| change without notice. | www.firelite.com |
|---|
