HONEYWELL HBT-BMS-3G 防盜報警安裝・保養

Name: HONEYWELL HBT-BMS-3G VARIABLE FREQUENCY DRIVES
Brand: honeywell
SKU: HBT-BMS-3G

產品簡介

honeywell HBT-BMS-3G 為VARIABLE FREQUENCY DRIVES，HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準，歡迎聯絡我們查詢 HBT-BMS-3G 香港價格連安裝報價。

HKEZIT 提供原廠行貨保養。硬件連專業安裝、設定及使用教學一站式報價，無需自行研究安裝與設定。我們同時承接裝ALARM、裝防盜、裝警鐘工程，硬件與工程同一團隊負責。

查詢價格連安裝 →

HBT-BMS-3G honeywell VARIABLE FREQUENCY DRIVES 產品圖片

詳細規格

Supply Voltage	Nominal 460 V AC: 380 to 480 V AC ± 10%
Supply Frequency	50/60 Hz ± 5%
True Power Factor (ƛ)	≥ 0.9 nominal at rated load
Displacement power factor (cos f)	Near unity (> 0.98)
Switching on input supply L1, L2, L3	Frame A, B, C: up to 10 HP maximum 2 times/min, greater than 10 HP maximum 1 time/min
Environment according to EN60664-1	Overvoltage category III/pollution degree 2
Output voltage	0-100% of supply voltage
Output frequency	0-590 Hz
Switching on output	Unlimited
Ramp times	1-3600 s
Ambient temperature	Max 122°F [50°C] (24-hour average maximum 113°F [45°C])
Temperature during storage/transport	-13°-+149/158°F [-25-+65/70°C]
Max. relative Humidity	5%-93% (IEC 721-3-3; Class 3K3 (noncondensing) during operation)
Vibration Test	1.0 g
EMC Standards, Emission	EN 61800-3
EMC standards, Immunity	EN 61800-3
Programmable digital inputs	4 fixed DI, 2 configurable DIO (6) total
Terminal number	18, 19, 27, 29, 32, 33
Logic	PNP or NPN
Voltage level	0-24 V DC
Voltage level, logic ‘0’ PNP	<5 V DC
Voltage level, logic ‘1’ PNP	>10 V DC
Voltage level, logic ‘0’ NPN	>19 V DC
Voltage level, logic ‘1’ NPN	<14 V DC
Maximum voltage on input	28 V DC
Input resistance, Ri	Approx. 4 kW
Number of analog inputs	2
Modes	Voltage or current
Mode select	Frame A, B, C: Switch S201 and switch S202
Voltage mode	Switch = OFF (U)
Max. voltage	±20 V
Current mode	Switch = ON (i)
Current level	0/4 to 20 mA (scalable)
Max. current	30 mA
Resolution for analog inputs	10 bit (+ sign)
Accuracy of analog inputs	Max. error 0.5% of full scale
Bandwidth	100 Hz
Programmable pulse	2
Terminal number pulse	29, 33
Max. Frequency at terminal 29, 33	110 kHz (pushpull driven)
Pulse input accuracy (0.1-1 kHz)	Max. error: 0.1% of full scale
Number of programmable analog outputs	1
Current range at analog output	0/4-20 mA
Max. load GND - analog output	500 W
Accuracy on analog output	Frame A, B, C: Max. error: 0.5% of full scale
Resolution on analog output	8 bit
Programmable digital/pulse outputs	2 configurable DIO
Max. output current (sink or source)	40 mA
Max. load at frequency output	1 kW
Max. capacitive load at frequency output	10 nF
Accuracy of frequency output	Max. error: 0.1% of full scale
Resolution of frequency outputs	12 bit
Programmable relay outputs	2
Environment according to EN 60664-1	Overvoltage category III/pollution degree 2
Terminal number 68	(P,TX+, RX+), 69 (N,TX-, RX-)
Terminal number 61	Common for terminals 68 and 69
Max. load	200 mA
USB standard	1.1 (full speed)
USB plug	USB type B device plug
Speed control range (open-loop)	1:100 of synchronous speed
Speed accuracy (open-loop)	30-4000 rpm: error ± 8 rpm
24 V DC	24 V DC supply voltage for digital inputs and external 13 transducers. Maximum output current 200 mA for all 24 V loads.
DI	18
DIO	27
DI COM	20 Common for digital inputs and 0 V potential for 24 V DC supply.
AO COM	39 Common for analog output.
AO	42 Programmable analog output. 0-20 mA or 4-20 mA at a maximum of 500 Ω
10 V DC	50 10 V DC analog supply voltage for potentiometer or thermistor. 15 mA maximum.
AI	53
AI COM	55 Common for analog input.
RS-485 (+)	68
RS-485 (-)	69
RO1 (C)	01
RO1 (NO)	02
RO1 (NC)	03
RO2 (C)	04
RO2 (NO)	05
RO2 (NC)	06
Drive Family	Options
HVFD3D = Honeywell 3G SmartVFD	B = 3 rd Generation Drive (Discontinued)
Input Phase	Options
3 = Three Phase (3~in, 3~out)	00 = Drive Only
Nominal Voltage	Enclosure Type
A = 208/230 Vac	1 = NEMA 1
C = 460 Vac	2 = NEMA 12
Nominal Horsepower	Keyboard
0015 = 1.5 HP	0400 = 40 HP G = Graphic KeyPad
Installation and User Guide	31-00559