1*10/100Mbps RJ45 port System: Steady on: The device is working normally, but the LAN interface is disconnected from the Indicator Light Blinking: The device is working normally, and the LAN interface is connected to the network Off: The device is powered off, or abnormal after being powered on Signal Strength: Recorder end: Three indicators blinking: Pairing Three indicators on: Paired Three indi
Maximum Transmitted Power
20dBm
工作溫度
-30℃ to 60℃
工作濕度
5% to 95%RH, Non-condensing
Transmission
Distance 500meters
Transmission Capability
2×Channels×4M bits Press and hold for 10 seconds to restore factory defaults. Press and hold for 3 seconds to pair.
Rx Sensitivity
IEEE 802.11b: -86dBm@11Mbps Mode A: Powered by 12V Passive POE( including passive PoE injector), allows up to 80m PoE
供電
power supply Mode B:Powered by 12 DC adapter (including DC adapter)
Protocol
IEEE 802.11b/g/n East Asia: 2412MHz to 2472MHz North America: 2412MHz to 2462MHz Europe: 2412MHz to 2472MHz Supported frequency range:2400 MHz to 2483.5 MHz (should depend on the local regulation.)
Network Mode
Bridge
Management
Web/APP
Ethernet
Static IPv4, DHCP client, DNS Support SSID, Password, Encryption type. Support scanning hotspots in the camera end. Supports device upgrade, factory settings restoration, configuration import, configuration
System and Maintaince
export, and device restart on the software. Support syslog, network detection.
安全
WPA-PSK, WPA2-PSK, Hidden SSID Unlimited New View http://www.uniview.com overseasbusiness@uniview.com; globalsupport@uniview.com No. 369, Xietong Road, Xixing Sub-district, Binjiang District, Hangzhou City, 310051, Zhejiang Province, China
兩者主要規格分別:工作溫度方面,WB-S500I-IN 係 -30℃ to 60℃,NSW6630-48XP8CQ-IN 係 0°C to 45°C (32°F to 113°F);工作濕度方面,WB-S500I-IN 係 5% to 95%RH, Non-condensing,NSW6630-48XP8CQ-IN 係 10% to 90% (noncondensing)。實際邊個型號更適合,需視乎現場環境同需求而定,可先比較 NSW6630-48XP8CQ-IN 詳細規格,或直接聯絡我們免費現場評估,由工程師建議最合適方案。