HONEYWELL CS-2484 防盜報警安裝・保養

Name: HONEYWELL CS-2484 Conventional Two-Wire
Brand: honeywell
SKU: CS-2484

產品簡介

honeywell CS-2484 為Conventional Two-Wire，HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準，歡迎聯絡我們查詢 CS-2484 香港價格連安裝報價。

©2006 Gamewell-FCI. All rights reserved.：www.gamewell-fci.com CS-2484 Rev. B page 1 of 3
Operation (Continued)：TYPE/MODEL NUMBER:
•Ionization：(Dual chamber) smoke detectors Photoelectric smoke detectors
thermistor reaches a preset level.：Gamewell 71035 (135°F [57.2°C]) or 71035-160 (160°F [71.1°C]
detector.：terminals for remote LEDs. Where indicated on the plans, the

HKEZIT 提供原廠行貨保養。硬件連專業安裝、設定及使用教學一站式報價，無需自行研究安裝與設定。我們同時承接裝ALARM、裝防盜、裝警鐘工程，硬件與工程同一團隊負責。

查詢價格連安裝 →

CS-2484 honeywell Conventional Two-Wire 產品圖片

詳細規格

©2006 Gamewell-FCI. All rights reserved.	www.gamewell-fci.com CS-2484 Rev. B page 1 of 3
Operation (Continued)	TYPE/MODEL NUMBER:
•Ionization	(Dual chamber) smoke detectors Photoelectric smoke detectors Gamewell 71033 using a horizontal optical bench housing the infrared emitter and sensor arranged radially to detect forward scattering light.
thermistor reaches a preset level.	Gamewell 71035 (135°F [57.2°C]) or 71035-160 (160°F [71.1°C]) or available Series 60 detectors. Standard 4.0" (10.16 cm), 6.0"(15.24 cm), and dard screw/crimp style terminals and shall provide
detector.	terminals for remote LEDs. Where indicated on the plans, the contractor shall which shall use standard screw/crimp style terminals free change over contacts (Form-C), may be used as a two-or four-wire base, shall use standard screw/ crimp style terminals and shall provide terminals for
Engineering Specifications	remote LEDs.
General Specification:	Where indicated on the plans, the contractor shall GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472 - Tel: (203) 484-7161 - Fax: (203) 484-7118
www.gamewell-fci.com	CS-2484 Rev. B page 2 of 3
Specifications:	Ordering Information:
Standby Current:	Photoelectric, combination 71033 Conventional photoelectric smoke
photo/heat, or ionization:	detector head. 30 to 45 µA @ 24 volts. 71034 Conventional ionization smoke detec-
Alarm Voltage:	6 to 28 volts. tor head.
Normal Alarm Output: 52 mA @ 24 volts.	71443 Conventional combination photo/heat
Temperature Range:	71035 Conventional thermal heat detector
Photo/Comb/Ion/	head (135°F [57.2°C]).
Thermal	32°F to 140°F (0°C to 60°C) 71035-160 Conventional thermal heat detector head (160°F [71.1°C]).
Thermal:	-5° F to 195° F 71035-210 Conventional thermal heat detector (-20.5°C to 90.5°C) head (210°F [98.8°C]).
Humidity:	0% to 95% relative humidity 71036 Conventional 4.0" (10.16 cm) detector (no condensation) base. 71086 Conventional 6.0" (15.24 cm) detector
Spacing:	Per NFPA codes. base.
Alarm Current:	6.0 (15.24 cm) detector base with 71086-RED Conventional 6.0" (15.24 cm) detector relay: base with flashing power-indicating 72 mA @ 24 volts. red LED. 71086-GREEN Conventional 6.0" (125.24 cm) detector base with flashing power-indicating green LED. 71086-SNDR Conventional 6.0" (15.24 cm) detector base with sounder. 71393 Conventional 4.0" (10.16 cm) detector base with relay and flashing power-ind