| passwords, plus an Autoprogram feature. | • Presignal delay option per NFPA 72. or selected from an internal library file. alarm/activation in less than two seconds. 300 modules and LCD-40 remote annunciators. 304.8 m) for retrofit applications (U.S. Patent 5,210,523). |
|---|
| User Interface | • 300 Series addressable devices feature decimal address selection. Address of each device can be easily set in the field by use of a screwdriver. • UDACT-F Digital Alarm Communicator reports 56 zones |
|---|
| • History file with 500-event capacity. | or 198 points to a Central Station. |
|---|
| Advanced Fire Technology | • Built-in printer interface — UL listed for permanent attach- |
|---|
| mulation is excessive. | • LCD-40 Series alphanumeric, 40-character, backlit remote Fire•Lite® Alarms is a Honeywell company. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•L |
|---|
| Wire | Distance Typical Wire Size |
|---|
| Requirements | in Feet (m) 10,000 feet 12 AWG (3.1 mm²): Belden 9583, Genesis 4410, Twisted-pair, shielded (3,048 m) Signal 98230, WPW D999. 8,000 feet 14 AWG (2.00 mm²): Belden 9581, Genesis 4408, Twisted-pair, shielded (2,438 m) Signal 98430, WPW D995. 4,875 feet 16 AWG (1.3 mm²): Belden 9575, Genesis 4406 Twisted-pair, shielded (1,486 m) and 4606, Signal 98630, WPW D991. 3,225 feet 18 AWG (0.78 mm²): Belden 9 |
|---|
| Unwisted, unshielded | 12 – 18 AWG (3.1 – 0.78 mm²). (305 m) |
|---|
| COMPATIBLE ADDRESSABLE DEVICES | NOTE: PIM-24 and DIM-485 options are not available simulta- neously. Neither the PIM-24 or DIM485 is needed with the MS- |
|---|
| lay). | ciators capable of displaying English-language text (requires |
|---|
| circuits. | and non-expandable (AFM Series) configurations to meet a |
|---|
| device backbox. | graphic annunciators. sheets (document numbers): LCD-40 (DF-51474), AFM/AFM-X (DF-51465), LDM Series (DF-51384), and UDACT-F (DF-51294). |
|---|
| to power notification appliances. | Off-Line Programming: Create entire program in your of- fice using a Windows®-based PC computer (order program- |
|---|
| the SMB500. | Auto-Programming: Command the MS-9200 to program itself (takes less than 30 seconds). In the Auto-Program |
|---|
| on a CHS-6 chassis in a BB-6F. | then loads default values for all options (General Alarm). It |
|---|
| modules on a CHS-6 chassis in a BB-6F. | all functions without referring back to the programming |
|---|
| module mounted inside. | as relays not linked to any zone or point. The MS-9200 performs an automatic test of each detector |
|---|
| EIA-232 PORT | every two hours. Failure to meet the test limits causes an DF-51276 • 01/28/05 — Page 3 of 4 |
|---|
| NFPA STANDARDS | PRODUCT LINE INFORMATION |
|---|
| Systems requirements: | Includes LCD display, single printed circuit board |
|---|
| pervisory). | MS-9200C Same as above with ULC listing and DP-1-R |
|---|
| RTM-8F). | 9200RBV2.0 Replacement motherboard. (requires RTM-8F or UDACT-F). transformer (UL listed). (requires UDACT-F). remote station connections. |
|---|
| CABINET SPECIFICATIONS | DP-1-R Full-length internal dress panel (required for |
|---|
| wide. | power supply. Expands notification appliance power from 3.0 amps to 6.0 amps. |
|---|
| PIM-24 | Printer interface module required to connect a 40- or 80-column printer.** VAC, 50/60 Hz, 2.3 Amps. Primary input power for |
|---|
| MS-9200E: 220/240 VAC, 50 Hz. | DIM-485 LCD-40 display interface module required to LCD-40 Series annunciators.** |
|---|
| module). | computer (requires PIM-24 and associated hardware). |
|---|
| with XRM-24). | TR-4-R Trim ring for semi-flush mounting. |
|---|
| • Four-wire detector power: 300 mA.* | BB-17F Battery box, required to mount PS-12180 |
|---|
| • Non-regulated power: 2.5 Amps maximum.* | BB-55F Battery box, required to house two BAT-12250 |
|---|
| *NOTE: Subtract from total 24 VDC source. | batteries and one CHG-120F battery charger. |
|---|
| cabinet for 18 AH batteries). | for housing/mounting arrangements. MS-9200 circuit board #71741, available June 1, 1998): charging 25 to 120 AH batteries (can only be 25-120 AH (use CHG-120F). used in conjunction with MS-9200 circuit board |
|---|
| • Charge float rate: 27.6 V. | #71741). |
|---|
| • Charger current: limited to 0.8 A. | BAT-1270 Battery, 12 volt, 7.0 AH, (two required). |
|---|
| tact ratings: 2.0 A @ 30 VDC. | BAT-12180 Battery, 12 volt, 18.0 AH, (two required). |
|---|
| CONTROLS AND INDICATORS | BAT-12250 Battery, 12 volt, 25 AH, (two required; requires |
|---|
| LED INDICATORS | CHG-120F). 1. AC POWER (green). BAT-12550 Battery, 12 volt, 55 AH, (two required; requires 2. FIRE ALARM (red). CHG-120F). 3. SUPERVISORY (yellow). FCPS-24F Remote power supply expands NAC outputs by 4. ALARM SILENCE (yellow). 6.0 amps or total system power by 4.0 amps. 5. SYSTEM TROUBLE (yellow). FCPS-24FS6 Remote power supply expands NAC outputs |
|---|
| MEMBRANE SWITCH CONTROLS | by 6.0 amps. Integral battery charger capable 1. ACKNOWLEDGE/STEP of 18 AH. 2. ALARM SILENCE FCPS-24FS8 Remote power supply expands NAC outputs by 3. DRILL 4. SYSTEM RESET (lamp test) 8.0 amps. 5 — 16. 12-key pad with full alphabet **NOTE: PIM-24 and DIM-485 options are not available si- 17 — 20. 4 cursor keys multaneously. Neither the PIM-24 or DIM485 is needed with 21. ENTER the MS-9200 motherbo |
|---|
