| RJ31X/Modules. | LED-10 Series: LED-type fire annunciators capable of |
|---|
| AC Power | displaying Alarm (red) and Trouble (yellow) LEDs for all ten |
|---|
| • 120 VAC, 50/60 Hz, 2.3 amps. | Initiating Device Circuits (IDCs). NOTE: For Canadian |
|---|
| • 230 VAC, 50 Hz, 1.2 amps (“E” suffix). | Supervisory Service, use LED-10LS2 only. |
|---|
| • Built-in brownout circuitry. | viding up to 16 zones of Alarm (red) annunciation and com- |
|---|
| • Built-in voltmeter. | mon system trouble LED. Mounts to 4-gang electrical box ONLY. LDM Series: Lamp Driver Module series for use with custom graphic annunciators. ACM-8RF: Remote Form-C relay module. Provides eight mappable Form-C relays driven by EIA-485 for contact-by- zone capability (two minimum required for contact-by-zone). |
|---|
| • Up to 100 transmitted events/messages. | Each requires ABS-8RF for mounting. |
|---|
| Communication Formats | Devices for use with the MS-5210UD, please refer to the LED-10, |
|---|
| • Ademco Contact ID. | CABINET SPECIFICATIONS |
|---|
| • 20 PPS, 3+1 standard and expanded. | The cabinet is red with a dark blue overlay. Knockouts on |
|---|
| • 20 PPS, 4+1 standard and expanded. | the top, sides, and back provide ease of wire entry. The |
|---|
| • 20 PPS, 4+2 standard and expanded. | cabinet can be surface or semi-flush mounted and is com- |
|---|
| • 4+1 and 4+2 Ademco Express. | pact in design. |
|---|
| INITIATING DEVICE CIRCUITS (ZONES) | Dimensions: |
|---|
| Class A. | (42.93 cm high x 36.83 cm wide x 11.43 cm |
|---|
| gramming options include: | Trim Ring: Part # TR-4-R, 20.020" high x 17.620" wide |
|---|
| PRODUCT LINE INFORMATION | PRT-24 Printer Interface Module. Provides an EIA- |
|---|
| municator (includes backbox, transformer, | DB25 adapter. |
|---|
| technical manual, and a frame & post op- | PK-CD Contains programming software for Windows- |
|---|
| erating instruction sheet). | based PC computer. |
|---|
| R dress panel included. | ing MS-5210UDC). |
|---|
| transformer (UL listed). | BB-17F UL listed battery backbox. Required for bat- |
|---|
| XRM-24 | 120 VAC, 100 VA transformer. Expands teries over 12 AH. |
|---|
| NAC power from 3.0 to 6.0 amps and sys- | ABS-8RF Metal enclosure for mounting each ACM-8RF |
|---|
| tem power from 3.6 amps to 6.6 amps. | module. |
|---|
| NAC-REM | Notification Appliance (Signal) Circuit, Re- TR-4-R Trim ring. |
|---|
| lay Expander Module. Adds two (Class A) | BAT-1270 Battery, 12 volt, 7.0 AH (two required). NACs and two Form-C relays. BAT-12120 Battery, 12 volt, 12.0 AH (two required). |
|---|
| CAC-10F | Class A Converter Module. Converts all BAT-12180 Battery, 12 volt, 18.0 AH (two required, re- Class B Initiating Device Circuits (zones) quires BB-17F backbox). and standard Notification Appliance Circuits |
|---|
| to Class A. | 5210UDRB Replacement motherboard. Osborne |
|---|
| Format # | Silent ITI Radionics |
|---|
| Ademco | FBI Hoffman Sescoa SurGuard |
|---|
| Knight | CS-4000 6000/6500 (Addresses 16 & 42) 685 (1) CP220FB Models 3000R (7) MLR-2 (9) 9000 (3) (5) 1&2 0 4+1 Ademco Express 1 4+2 Ademco Express 4 (8) 2 3+1/Standard/1800/2300 (2) (4) (5,6) 3 3+1/Expanded/1800/2300 (2) (4) 4 3+1/Standard/1900/1400 (2) (4) 5 3+1/Expanded/1900/1400 (2) (4) 6 4+1/Standard/1800/2300 (2) (4) (5) 7 4+1/Expanded/1800/2300 (2) (4) 8 4+1/Standard/1900/1400 (2) (4) 9 4+1/Expande |
|---|
| A | 4+2/Standard/1800/2300 (2) (4) (5) |
|---|
| B | 4+2/Expanded/1800/2300 (2) (4) |
|---|
| C | 4+2/Standard/1900/1400 (2) (4) |
|---|
| D | 4+2/Expanded/1900/1400 (2) (4) |
|---|
| E | Ademco Contact ID 51492t1.tbl DF-51492 • 07/12/04 — Page 3 of 3 |
|---|
