| battery charger and battery level. | – Gentex |
|---|
| control function. | • Built-in Programmer. – ANN-80 Remote LCD Annunciator – ANN-I/O LED Driver |
|---|
| Features | – ANN-S/PG Printer Modules – ANN-RLY Relay Module – ANN-LED Annunciator Module |
|---|
| • | 80-character LCD display (backlit). 12B, and 2001. • Real-time clock/calendar with daylight savings time control. |
|---|
| ments. | • Piezo sounder for alarm, trouble and supervisory. |
|---|
| • Extensive transient protection. | • Low AC voltage sense. |
|---|
| • Dual hazard operation. | • Outputs Programmable for: |
|---|
| timers. | • NACs programmable for: Circuit). – Strobe Synchronization – Selective Silence (horn-strobe mute) – Temporal or Steady Signal cial application power). – Silenceable or Non-silenceable – Release Stage Sounder – System Sensor |
|---|
| • Optional Dress Panel DP-51050 (red). | Initiating Device Circuits - TB4 and TB6 |
|---|
| cabinet. | • Alarm Zone 6 on TB6. and IDCs. • Style B (Class B) wiring with Style D (Class A) option. • Normal Operating Voltage: Nominal 20 VDC. 411UDAC). • Alarm Current: 15 mA minimum. • Maximum Loop Resistance: 100 Ohms. |
|---|
| PROGRAMMING AND SOFTWARE: | • End-of-Line Resistor: 4.7K Ohms, 1/2 watt (PN 71252). or selected from an internal library file. Refer to the Fire•Lite Device Compatibility Document for listed |
|---|
| • Programmable Abort operation. | compatible devices. Notification Appliance and Releasing Circuit(s) - TB5 and • Four Output Circuits. front panel. • Style Y (Class B) or Style Z (Class A) with optional con- verter module. linked to any zone or input point. • Special Application power. |
|---|
| USER INTERFACE: | • Supervised and power-limited circuitry. |
|---|
| adjustments. | application, 300 mA regulated maximum per NAC). patible listed devices. |
|---|
| Controls and Indicators | Form-C Relays - Programmable - TB8 |
|---|
| LED INDICATORS | • Relay 1 (factory default programmed as Alarm Relay) |
|---|
| CONTROL BUTTONS | It can be connected to the trouble bus of a peripheral, such as |
|---|
| • ACKNOWLEDGE | a power supply, which is compatible with open collector cir- cuits. |
|---|
| • SYSTEM RESET (lamp test) | Special Application Resettable Power - TB9 |
|---|
| • DRILL | • Operating Voltage: Nominal 24 VDC. |
|---|
| AC Power – TB1 | • Maximum Available Current: 500 mA - appropriate for powering 4-wire smoke detectors (see note). • Power-limited Circuitry. Refer to the Fire•Lite Device Compatibility Document for com- tion. NOTE: Total current for resettable power, nonresettable power |
|---|
| • Supervised, nonpower-limited. | and Output Circuits must not exceed 7.0 amps. Special Application Resettable or Nonresettable Power - VDC @ 1.4 amp. Supervised, nonpower-limited. • Operating Voltage: Nominal 24 VDC. • Maximum Available Current: 500 mA (see note 1). 18 Amp Hour batteries can be housed in the FACP cabinet. Larger batteries require separate battery box such as the • Power-limited Circuitry. |
|---|
| BB-26 or BB-55). | • Jumper selectable by JP31 for resettable or nonresettable |
|---|
| • Minimum Battery Size: 7 Amp Hour. | power. Refer to the Fire•Lite Device Compatibility Document for com- patible listed devices. DF-60238:C3 • 3/6/2017 — Page 3 of 4 |
|---|
| System Capacity | components may be adversely affected by extreme tempera- ture ranges and humidity. Therefore, it is recommended that with a normal room temperature of 15 – 27°C/60 – 80°F. |
|---|
| amps | The MRP-2002(E) complies with the following NFPA 72 Fire 2.085 amps – NFPA 12 CO2 Extinguishing Systems (High Pressure tion, supervised, nonpower-limited – NFPA 12A Halon 1301 Extinguishing Systems – NFPA 12B Halon 1211 Extinguishing Systems – NFPA 72 National Fire Alarm Code for Local Fire Alarm – NFPA 2001 Clean Agent Fire Extinguishing Systems |
|---|
| Shipping Specifications | Agency Listings and Approvals The listings and approvals below apply to the basic MRP- 2002(E) control panels. In some cases, certain modules may |
|---|
| 尺寸 | not be listed by certain approval agencies, or listing may be in |
|---|
| – Height 20.00" (50.80cm) | process. Consult factory for latest listing status. |
|---|
| – Width 22.50" (57.15cm) | • UL: S624 |
|---|
| – Depth 8.50" (21.59cm) | • FM approved |
|---|
| Temperature and Humidity Ranges | • MEA: 333-07-E FireLite® Alarms and System Sensor® are registered trademarks of Honeywell International Inc. ©2017 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications |
|---|
