| line integrity. | MS-5UD-7C • Alarm Verification. |
|---|
| Features | • PAS (Positive Alarm Sequence). |
|---|
| • Listed to ULC S527-99, S559-01. | • Automatic battery trickle charger. |
|---|
| – MS-5UD-7C - five IDCs. | – Built-in LED Annunciator Module ANN-LED |
|---|
| – MS-10UD-7C - ten IDCs. | • Optional 4XTMF module (conventional reverse polarity/city box transmitter). |
|---|
| cial application power | PROGRAMMING AND SOFTWARE: |
|---|
| – MS-5UD-7C - four NACs. | • Can be programmed at the panel with no special software |
|---|
| – MS-10UD-7C - four NACs. | or additional equipment. |
|---|
| – Silence Inhibit. | • Upload/Download (local or remote) of program and data via |
|---|
| – Auto-Silence. | integral DACT. – Strobe Synchronization for System Sensor, Wheelock, USER INTERFACE: |
|---|
| Gentex, Faraday, or Amseco devices. | • Built-in DACT (Digital Alarm Communicator/Transmitter). |
|---|
| – Selective Silence (horn-strobe mute). | • Integral 80-character LCD display with backlighting and |
|---|
| – Temporal or Steady Signal. | keypad. |
|---|
| – Silenceable or Nonsilenceable. | • Real-time clock/calendar with automatic daylight savings NACs and IDCs (2 required for MS-10UD-7C). • ANN-BUS for connection to annunciators. tact Ratings 2.0 A@ 30 VDC or 0.5 A @ 30 VAC (resistive). • Piezo sounder for alarm, trouble, and supervisory. DF-60440:B • 07/26/2010 — Page 1 of 4 |
|---|
| Controls and Indicators | • Wire size: minimum 14 AWG (2.00 mm²) with 600 V insula- tion. Supervised, nonpower-limited. |
|---|
| LED INDICATORS | Battery (sealed lead acid only) – J12: |
|---|
| • FIRE ALARM (red) | • Maximum Charging Circuit - Normal Flat Charge: 27.6 VDC |
|---|
| • SUPERVISORY (yellow) | @ 1.4 A. Supervised, nonpower-limited. |
|---|
| • TROUBLE (yellow) | • Maximum Charger Capacity: 18 AH battery for MS-5UD- |
|---|
| • AC POWER (green) | 7C, and 26 AH battery for MS-10UD-7C. [Two 18 Ah batter- |
|---|
| • ALARM SILENCED (yellow) | ies can be housed in the FACP cabinet. Larger batteries require separate battery box such as the BB-26 or BB-55.] |
|---|
| CONTROL BUTTONS | • Minimum Battery Size: 12 AH. |
|---|
| • ACKNOWLEDGE | Initiating Device Circuits – TB4 (and TB 6 on MS-10UD-7C |
|---|
| • ALARM SILENCE | only): |
|---|
| • SYSTEM RESET (lamp test) | • Alarm Zones 1 - 5 on TB 4 (MS-5UD-7C and MS-10UD- |
|---|
| • DRILL | 7C). • Alarm Zones 6 - 10 on TB6 (MS-10UD-7C only). |
|---|
| Terminal Blocks | • Supervised and power-limited circuitry. |
|---|
| AC Power – TB1: | • Operation: All zones Style B (Class B). 3.90 A. • Alarm Current: 15 mA minimum. 3.90 A. • Maximum Loop Resistance: 100 ohms. 52416cab.wmf Cabinet Measurements |
|---|
| listed). | ANN-LED: Mounts in the dress panel and provides three |
|---|
| • Standby Current: 2 mA. | LEDs for each zone: Alarm, Trouble, and Supervisory. |
|---|
| compatible devices. | ten Form C relays. ACCESSORIES BB-26: Battery backbox, holds up to two 25 AH batteries. |
|---|
| • Operation: Style Y (Class B) | BB-55: Battery backbox, holds up to two 25 AH batteries. |
|---|
| • Special Application power | TR-CE: Optional trim-ring for semi-flush mounted cabinets. maximum per NAC; 7.0 A for MS-10UD-7C, 3.0 A maxi- mum per NAC. Relay) power. ering four-wire smoke detectors. Canadian DF-60440:B • 07/26/2010 — Page 3 of 4 |
|---|
| System Capacity | Temperature and Humidity Ranges 49°C and at a relative humidity 93% ± 2% RH (noncondens- |
|---|
| Electrical Specifications | ing) at 32°C ± 2°C. However, the useful life of the system's standby batteries and the electronic components may be 3.90 A ity. Therefore, it is recommended that this system and its 60 HZ, 3.90 A temperature of 15 – 27°C. |
|---|
| tion, supervised, nonpower-limited | Agency Listings and Approvals 7C and MS-10UD-7C control panels. In some cases, certain |
|---|
| Cabinet Specifications | modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for lat- est listing status. • FM Approved |
|---|
| Shipping Specifications | NOTE: For UL-listed models, see DF-52416. – 50.80 cm high NFPA Standards |
|---|
| – 57.15 cm wide | The MS-5UD-7C/MS-10UD-7C complies with the following NFPA 72 Fire Alarm Systems requirements: – 21.59 cm deep. |
|---|
| Weight: 12.20 kg | – LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervisory). – AUXILIARY (Automatic, Manual and Waterflow) (requires 4XTMF). – REMOTE STATION (Automatic, Manual and Waterflow) (Where a DACT is not accepted, the alarm, trouble and supervisory relays may be connected to UL 864 listed transmitters. For reverse polarity signaling of alarm and trouble, 4XTMF is required.) – PROPRIETARY (Automatic, |
|---|
| change without notice. | www.firelite.com |
|---|
