| • | Schools • Healthcare Facilities • Factories |
|---|
| Features | • MMF-301: Addressable monitor module that can be used to |
|---|
| remote telephone jacks. | remote handset (FHS-F). Up to 24 of these modules are |
|---|
| • Built-in Auto-program feature. | supported by the ECC-FFT. against wire-to-wire short circuits on the SLC loop. It is placed between each device or the SLC loop to isolate a tor when wired in Style Y, Class B operation. short-circuit problem between the Remote Phone Jacks |
|---|
| • Full System status LED display. | (FPJ-F) when Class A (Style 7) wiring is required Style 7) or class B (Style 4) configuration. Control and indicators |
|---|
| • Certified for seismic applications | • Auto-program: Searches the SLC loop on the ECC-FFT for devices. When a device is found, the active LED will |
|---|
| • Onboard Form-C system trouble relay. | blink in each zone. remote handsets (FHS-F when connected to the ECC-FFT. gram is initiated. |
|---|
| for the FHS-F. | cuit for communication when a remote handset is plugged |
|---|
| store five Fire Fighter Handsets (FHS-F). | • Trouble Silence: Used to silence a system type trouble that has occurred in the ECC-FFT system. LED INDICATORS (VISIBLE WITH DOOR AND DRESS |
|---|
| electrical box. | PANEL OPEN) telephone circuit connected to the ECC-FFT. ization is complete (which takes approximately 20 sec- onds). Once initialization is complete, the status LED will used to store five Fire Fighter Handsets (FHS-F). DF-60735:C • 7/28/2015 — Page 1 of 4 audio channel, this LED will blink and the piezo will sound. lem with the local handset. The operator at the FFT then picks up the local hands |
|---|
| Contact ELR Connected | terminal TB4 connectors or other MMF-301 4.7KΩ, 1/2 Watt ELR (Installation last device for Style Y [Class B] telephone circuit only.) FPJ-F ECC-FFT Connected to FPJ-F |
|---|
| SUPERVISION | • Current Requirements: set is plugged into that zone. The LED will turn off when the – Active: 230mA. handset is removed from the zone. occur such as a missing device or double address. Press- • SLC circuit: ing the Trouble Silence Key will cause the zone trouble LED – Voltage output: 32VDC. to turn on steady. Once the zone trouble is corrected, the – Current rating: 150mA. LED will turn off. • A |
|---|
| WIRING REQUIREMENTS | – Voltage output: 17VDC. Compatible Devices ECC-50/100: Emergency Command Center. (Manual PN: LS10001-000FL-E). The ECC-FFT complies with the following UL Standards, • IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seis- mic). |
|---|
| Product Line Information | • CBC 2007 (Seismic) tion at once: 10. DF-60735:C • 7/28/2015 — Page 3 of 4 ©2015 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. A |
|---|
