| ity/city box transmitter (4XTMF). | • PAS (Positive Alarm Sequence) and Pre-signal per point (NFPA |
|---|
| Features | 72 compliant) • Up to 16 ANN-BUS annunciators- 8 per each ANN-Bus |
|---|
| • Listed to UL Standard 864, 10th edition | • Remote Acknowledge, Alarm Silence, Reset and Drill via phone Service) Central Station Communicator over AlarmNet • Upload/Download of program and data via USB with optional FS- Communicator over AlarmNet® |
|---|
| Center | • Supports LiteSpeed™ and CLIP protocols |
|---|
| • ECC-FFT Firefighter Telephone option | • SLC operates up to 10,000 ft. (3,000 m) in LiteSpeed mode with |
|---|
| • Compatible with SWIFT® wireless devices | twisted, unshielded wire • Single addressable SLC loop which meets NFPA Class B and Reports two devices set to the same address Class A requirements |
|---|
| Style Y (Class B) NAC circuits | • 198 addressable device capacity (99 addressable detectors and |
|---|
| and Gentex devices | • Compatible with Fire•Lite’s addressable devices (refer to the |
|---|
| • Built-in Programmer | • Four independently programmable output circuits. Circuits can be |
|---|
| • History file with 1,000 event capacity | – Style Z (Class A) |
|---|
| • Addressable sounder base compatibility | • Silence Inhibit and Autosilence timer options |
|---|
| response | circuit board NACs with two-stage capability • Selectable strobe synchronization per NAC |
|---|
| • Automatic device type-code verification | • 2.5 A special application, 250mA regulated, total power for NACs |
|---|
| • Point trouble identification | NOTE: Maximum or total 24VDC system power shared between all NAC |
|---|
| • Waterflow selection per module point | circuits and the ANN-BUS is 2.7 A DF-60957:C • 7/16/2018 — Page 1 of 4 |
|---|
| PROGRAMMING AND SOFTWARE | PRN Series: UL listed compatible event printer. Uses tractor-fed selected from an internal library file 4XTMF Reverse Polarity Transmitter Module: Provides a super- vised output for local energy municipal box transmitter, alarm and |
|---|
| • 99 software zones | trouble. Includes a disable switch and disable trouble LED. to any zone or input point COMPATIBLE ANNUNCIATORS office using FS-Tools, a Windows®-based software package, and ANN-80: Remote LCD annunciator mimics the information dis- upload/download system programming locally. Offline program- played on the FACP LCD display. Recommended wire type is un- ming requires an ethernet connection. FS-Tools |
|---|
| www.firelite.com. | ANN-100: Remote LCD annunciator mimics the information dis- played on the FACP LCD display. Recommended wire type is un- |
|---|
| User interface | shielded. For use in FM applications only. |
|---|
| LED INDICATORS | ANN-I/O: LED Driver Module provides connections to a user sup- plied graphic annunciator. (See DF-52430.) |
|---|
| • | Fire Alarm (red) ANN-LED: Annunciator Module provides three LEDs for each zone: |
|---|
| KEYPAD | SD365-IV: Addressable low-profile photoelectric smoke detector. |
|---|
| PRODUCT LINE INFORMATION | SD365R-IV: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. Ivory. Lite- Speed and CLIP mode. |
|---|
| chassis. | Legacy Devices SD355: Addressable low-profile photoelectric smoke detector. SD355T: Addressable low-profile photoelectric smoke detector with SD355R: Remote test capable addressable photoelectric smoke detector for use with DNR(W) duct detector housing. SD355CO: Addressable, low-profile device that provides fire, heat, and carbon monoxide (CO) detection. |
|---|
| option. | W-GATE: LiteSpeed Wireless Gateway |
|---|
| B200SR: Addressable sounder base. | heat detector. |
|---|
| BEAM355: Intelligent beam smoke detector. | W-MMF: LiteSpeed Intelligent wireless monitor module. |
|---|
| ity test. | W-BG12LX: LiteSpeed Intelligent wireless pull station. |
|---|
| includes SD355R. | bases. |
|---|
| SD355R/SD365R separately.) | USB port of a PC running SWIFT Tools. |
|---|
| Addressable Modules | NOTE: For more information on Compatible Addressable Devices for use with the ES-200X, see the following data sheets (document num- |
|---|
| A) IDC. | Series/MDF-300 (DF-52121), MMF-300-10 (DF-52347), MMF-302-6 |
|---|
| vides two Style B (Class B) only IDCs. | (51309). C304, and BG-10LX are not compatible with LiteSpeed polling. If the ADDRESSABLE DEVICE ACCESSORIES the MMF-302 module circuit. These resistors are included with each module. detectors and notification appliances. Wiring Requirements While shielded wire is not required, it is recommended that all SLC wiring be twisted-pair to minimize the effects of electrical interfer- DF-60957:C • 7/16/2 |
|---|
| System Capacity | Temperature and Humidity Ranges |
|---|
| Electrical Specifications | an environment with a normal room temperature of 15 – 27°C/60 – 80°F. |
|---|
| batteries.) | – LOCAL (Automatic, Manual, Waterflow and Sprinkler Supervi- – AUXILIARY (Automatic, Manual and Waterflow) (requires |
|---|
| listed compatible devices. | – PROPRIETARY (Automatic, Manual and Waterflow). work) |
|---|
| Cabinet Specifications | – IBC 2012, IBC 2009, IBC 2006, IBC 2003, IBC 2000 (Seismic). The listings and approvals below apply to the basic ES-200X control panel. In some cases, certain modules may not be listed by certain |
|---|
| Shipping Specifications | approval agencies, or listing may be in process. Consult factory for • FM approved • CSFM: 7165-0075:500 • FDNY: COA #6261 NOTE: See DF-60958 for ULC-listed model. AlarmNet®, Fire-Lite® Alarms, SWIFT®, and System Sensor® are registered trademarks of Honeywell International Inc. Microsoft® and Windows® are registered trademarks of the Microsoft Corporation. ©2018 by Honeywell International Inc. All |
|---|
