| reflector. | DRIFT COMPENSATION Once the optimum alignment is found, indicated by all green The detector incorporates automatic drift compensation, whereby arrows, the lens is locked with a slide lever. A paintable cover is the detector will adjust its detection thresholds in line with any then placed over the front to secure the lever in locked position. long-term signal reduction of the beam caused by dust o |
|---|
| or any other very bright light sources. | • Resistant to solid object intrusion |
|---|
| RESISTANT TO FOREIGN OBJECT INTRUSION | • Automatic sensitivity threshold level settings and drift compensa- tion Advanced smoke imaging techniques allow the detector to avoid false alarms from partial and sudden blockage from foreign object • 50° horizontal and 20° vertical beam adjustment |
|---|
| intrusion. | • Built-in imager heater • Remote test station capable for electronic simulated smoke test |
|---|
| TIME-SAVING AUTOMATIC SENSITIVITY SETTING | from ground level Unique in the market, the sensitivity of the detector is selected and • Status LED indicators visible from the front and bottom set automatically at the optimum sensitivity based on the size of • Paintable housing/cover the reflector measured in the field of view. • Removable plug-in terminal blocks • Optional heater kit available for the reflector DF-60143:B • 1/16/2019 — Page 1 |
|---|
| PHYSICAL/OPERATING SPECIFICATIONS | OPERATIONAL SPECIFICATIONS |
|---|
| mm); Depth 4.5” (114.3 mm) | • Adjustment Angle: 20 degrees vertical, 50 degrees horizontal (200 mm) Level 4 50% |
|---|
| • Weight (Installed): 2.48 lbs (1.12 kg) | • Test/Reset Features: Local alarm test switch, local alarm reset |
|---|
| • Weight (Shipping): 3.91 lbs (1.77 kg) | switch, Remote test and reset switch (Compatible with • Smoke Detector Spacing: On smooth ceilings, 30-60 feet |
|---|
| ELECTRICAL SPECIFICATIONS: OSI-RI-FL | between projected beams and not more than one-half that spac- |
|---|
| • Minimum: 15 VDC | be used depending on the ceiling height, airflow characteristics, and response requirements. See NFPA 72 (S524 in Canadian applications). 13 mA @ 32 VDC 14 mA @ 24 VDC Agency Listings 20 mA @ 15 VDC • UL, ULC: S911 |
|---|
| • Maximum Alarm Current (LED on): | • FM: PR449231 22 mA @ 32 VDC • CSFM: 7260-0075:0506 15 mA @ 24 VDC 22 mA @ 15 VDC Product Line Information |
|---|
| ELECTRICAL SPECIFICATIONS: BEAMHKR | • OSI-RI-FL: Intelligent imaging beam smoke detector including |
|---|
| • Voltage Range: 15 to 32 V | reflector, UL/ULC listed |
|---|
| • Maximum Current: 450 mA Max at 32 V | • OSP-002: Laser alignment tool |
|---|
| • Power Consumption: | • OSP-004: Test filter, 10 pack 7.7 W @ 24 V • RTS151: Remote test station, UL listed 15 W @ 32 V • RTS151KEY: Test and reset station with key lock, flush mount, |
|---|
| ELECTRICAL SPECIFICATIONS: RTS151KEY(-A) | UL listed |
|---|
| • Voltage Range: 10.2 to 32 VDC | • RTS151KEY-A: Test and reset station with key lock, flush mount, ULC listed • BEAMHKR: Heater kit for the reflector |
|---|
| ENVIRONMENTAL SPECIFICATIONS | • 6500-MMK: Multi-mount accessory for ceiling or wall mounting (0°C to 37.8°C) +55°C) Fire•Lite® Alarms and LiteSpeed™ are registered trademarks of Honeywell International Inc. ©2019 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information |
|---|
