| VALVE ASSEMBLY | PRESSURE INDEPENDENT CONTROL VALVE (PICV) FLEX HOSES |
|---|
| PARAMETER | SPECIFICATIONS PARAMETER SPECIFICATIONS PARAMETER SPECIFICATIONS |
|---|
| Static pressure | 2500 kPa / 360 psi Static Pressure 2500 kPa / 360 psi Static pressure 3000 kPa / 435 psi |
|---|
| Medium | -20ºC to +120ºC / -4ºF to +248ºF Medium -20ºC to +120ºC / -4ºF to +248ºF Maximum ambient +65°C / +149°F |
|---|
| Temperature | Temperature temperature |
|---|
| Size Range | DN15 - DN32 (1/2" - 1 1/4") Size Range DN15 - DN32 (1/2" - 1 1/4") Media -20ºC to +120ºC / -4ºF to |
|---|
| temperature | +248ºF |
|---|
| PN Pressure | PN25 |
|---|
| COMPONENT | MATERIALS Rating Working pressure 600-3000 kPa / 87-435 psi |
|---|
| Housings and | Forged brass DZR ASTM Ambient +1ºC to +50ºC / +34ºF to +122ºF Bending radius DN15 (1/2"): 55 mm / 2.16" |
|---|
| cover | CuZn36Pb2As (CW602N) Temperature DN20 (3/4"): 75 mm / 2.95" |
|---|
| O-rings | EPDM DN25 (1"): 90 mm / 3.54" |
|---|
| Maximum close | 800 kPa / 116 psi DN32 (1 1/4"): 120 mm / 4.72" |
|---|
| Ball valves | Nickel-plated brass off pressure |
|---|
| End connections | Female ISO |
|---|
| Handles, extended | Painted aluminum Maximum 800 kPaD / 116 psid operational ∆P |
|---|
| Strainer mesh | 420μ (=40 mesh) stainless steel |
|---|
| Control | Low Flow Regulator: linear (may be COMPONENT MATERIALS |
|---|
| Drain valve | Brass DZR ASTM CuZn36Pb2As characteristic converted to equal % on actuator) Tube EPDM (CW602N) |
|---|
| Control range | 1:1000 / IEC 60534 Braiding Stainless steel AISI 304 |
|---|
| Drain ball valve | Nickel-plated brass |
|---|
| Rangeability | 100:1 Sleeves Stainless steel |
|---|
| Drain valve handle | Painted aluminum |
|---|
| Turn down ratio | 100:1 Fittings Brass ASTM CuZn40Pb2 (CW617N) |
|---|
| End connection | Female ISO |
|---|
| Shut-off | ANSI / FCI 70-2 206 / IEC 60534- Nuts Brass ASTM CuZn39Pb3 (CW614N) |
|---|
| Housing Taps | 1/4" ISO leakage 4 - Class IV/ 0.01% leakage of full |
|---|
| Note: Assembly comes complete and fully | open valve capacity |
|---|
| pressure tested. | Stroke DN15 - DN25: 3.4 mm (0.13") DN32: 5.2 mm (0.2") |
|---|
| Maximum Flow | DN15 - DN20(LF): 64 to 1110 l/hr |
|---|
| INSULATION SHELL | Rate Setting DN15 - DN25(HF): 620 to 2650 l/hr |
|---|
| Ambient | -55°C to +105°C / +67°F to 221°F, |
|---|
| Thermal | 38 mW/mK, according to DIN52612 |
|---|
| Valve Housing | DZR Brass ASTM CuZn36Pb2As conductivity |
|---|
| Flow Regulator | Glass-reinforced PSU/POM/PPS |
|---|
| Fire rating | Class F, according to EN13501-1 |
|---|
| Cone | PPS |
|---|
| Resistant to | Water, sea water, glycol, silicone grease, |
|---|
| alcohol (ethanol), soaps, detersive | Diaphragm EPDM solutions (10% Extran MA01), mild |
|---|
| O-rings and seat | EPDM acids (10% Nitric acid, 10% Sulfuric |
|---|
| acid, 10% Hydrochloric acid) | Head Nut Forged brass ASTM CuZn40Pb2 |
|---|
| Metal components | Stainless steel |
|---|
| 材質 | EPP (polypropylene foam) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 2 |
|---|
| Option 1. | Option 2. Honeywell FCU PICV Kit supports flushing procedure according to BSRIA BG29/2021. |
|---|
| blowdown valve. | and FCU. It is recommended to set PICV setting to maximum flow to allow as much opening as possible. Alternatively, the PICV insert may be removed from valve housing and replaced with a flushing cap allowing unrestricted back-flushing though PICV housing, FCU and strainer blowdown valve. FCU Pressure Independent Control Valves Kits | www.honeywell.com | 3 ACTUATOR MODEL NUMBER MLP41MNA-NU MLP71MNA |
|---|
| +/-10% | +/-10%, +/-15% AC +/-10% +/-10% AC ±10% ±15% |
|---|
| Frequency | 50/60Hz Power consumption 4.7VA 6.8VA (3.3W) 4.7VA (2.2W) 1.2W 1.2W 8VA 6VA (4W) (Peak) 0-10 Vdc • • • • • Control 2-10 Vdc • • • 2-Position SPDT • |
|---|
| On-Off / 2-Position SPST | • |
|---|
| Feedback (0)2-10Vdc | • • |
|---|
| Actuator Force/Torque (N/Nm) | 250 N 250 N 160 N 140 N 140 N 200 N 200 N |
|---|
| Electrical actuating | • • • • • |
|---|
| Thermo-electrical actuating | • • |
|---|
| Running Time | 22 sec/mm 22 sec/mm 22 sec/mm 270 sec 210 sec 27.2 sec/mm 5.5 sec/mm Electronic |
|---|
| Power Fail Safe Action | Fail In Place Fail In Place Fail Safe Fail Safe Fail In Place Fail In Place Fail-Safe |
|---|
| Cable length (meter) | 1.5 m 1.5 m 1.5 m 1m 1m 1.5 m 1.5 m |
|---|
| Model Number | Compatibility |
|---|
| VPI015TPL2-KIT DN15 (1/2") | • • • • • • • |
|---|
| VPI015TPH2-KIT DN15 (1/2") | • • • • • • • |
|---|
| VPI020TPL2-KIT DN20 (3/4") | • • • • • • • |
|---|
| VPI020TPH2-KIT DN20 (3/4") | • • • • • • • |
|---|
| VPI025TPH2-KIT DN25 (1") | • • • • • • • |
|---|
| VPI032TPH2-KIT DN32 (1-1/4") | • • • • • • • |
|---|
| CONNECTION | PRESSURE MAXIMUM PRESSURE |
|---|
| VALVE TYPE | VALVE SIZE ASSEMBLY |
|---|
| 類型 | TEST PORTS FLOW RATE CLASS VPI - Valve P - With |
|---|
| Pressure | 015 - DN15 / 1/2" T - Threaded DN Size L - Low Max Flow 2 - PN25 KIT Pressure Ports Independent 020 - DN20 / 3/4" H - High Max Flow 025 - DN25 / 1" 032 - DN32 / 1 1/4"* |
|---|
| VPI | 020 T P H 2 - KIT FCU Pressure Independent Control Valves Kits | www.honeywell.com | 4 |
|---|
| VALVE SIZE | C L1 L2 H1 H2 WEIGHT MODEL |
|---|
| MM (IN) | MM (IN) MM (IN) MM (IN) MM (IN) MM (IN) KG (LB) |
|---|
| VPI015TPL2-KIT | DN15 (1/2) 80 (3.15) 143 (5.63) 150 (5.90) 76 (2.99) 80 (3.15) 1.73 (3.81)* |
|---|
| VPI015TPH2-KIT | DN15 (1/2) 80 (3.15) 143 (5.63) 150 (5.90) 76 (2.99) 80 (3.15) 1.73 (3.81)* |
|---|
| VPI020TPL2-KIT | DN20 (3/4) 80 (3.15) 139 (5.47) 154 (6.06) 78 (3.07) 80 (3.15) 1.93 (4.25)* |
|---|
| VPI020TPH2-KIT | DN20 (3/4) 80 (3.15) 139 (5.47) 154 (6.06) 78 (3.07) 80 (3.15) 1.93 (4.25)* |
|---|
| VPI025TPH2-KIT | DN25 (1) 80 (3.15) 156 (6.14) 172 (6.77) 87 (3.43) 80 (3.15) 2.47 (5.45)* D2 D1 C |
|---|
| VPI032TPH2-KIT** | DN32 (1-1/4) 80 (3.15) 248 (9.76) 247 (9.73) 120 (4.72) 134 (5.28) 223 (8.78) 302 (11.89) 6.68 (14.7) |
|---|
| L1 | H1 D (DEPTH) WEIGHT* NAME |
|---|
| Insulation shell | 228 (8.98) 158 (6.22) 210 (8.27) 0.35 (0.77) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 5 |
|---|
| DN15 LF - DN20 LF | DN15 HF - DN20HF - DN25 HF DN32 SETTING |
|---|
| L/SEC | L/HR GPM L/SEC L/HR GPM L/SEC L/HR GPM FCU Pressure Independent Control Valves Kits | www.honeywell.com | 6 |
|---|
| DN15/20 (LF) AND DN32 | DN15/20/25 (HF) For example - A micrometer setting of 3.2 (DN32 valve) on dial, For example - A micrometer setting of 2.3 on dial, corresponds to corresponds to a maximum flow rate of: 3350 l/h (17.7 GPM) a maximum flow rate of: 1430 l/h (6.28 GPM) |
|---|
| MODEL NUMBER | MAXIMUM FLOW RATE WORKING DIFFERENTIAL PRESSURE |
|---|
| DN15/DN20 (LF) | 64 l/h – 1110 l/h 30 kPaD – 800 kPaD |
|---|
| DN15/DN20/DN25 (HF) | 620 l/h – 2650 l/h 35 kPaD – 800 kPaD |
|---|
| DN32 | 865 l/h – 4630 l/h 16 kPaD – 800 kPaD FCU Pressure Independent Control Valves Kits | www.honeywell.com | 7 |
|---|
| Operation: Modulating | Power Consumption: Wire Connection: |
|---|
| Supply Voltage: | 24V AC: 2.5VA operating (4.7VA max.) Fixed, 5 wires x 0.50 mm2, 1.5 meter cable |
|---|
| Failsafe Function: No | Ambient Temperature: 0°C to +50°C Protection Rating: IP54 incl. upside- |
|---|
| Control Signal: Analog 0(2)-10V DC, | (+32°F to +122°F) down, class III, indoor use only |
|---|
| <0.5mA | Media temperature: 0°C to +120°C Weight: 0.25 kg / 0.55 lb |
|---|
| Feedback: Yes, control signal | (+32°F to +248°F) Valve Size Compatibility: DN15 - DN32 |
|---|
| Actuating Force: High (250N -30N/+70N) | Humidity rating: 0-85% RH, no Override: Yes, Electrical |
|---|
| Stroke: 5.8 mm / 0.23 in (compensated) | condensation |
|---|
| Operation Time: 22 sec/mm | Position Indicator: Yes |
|---|
| MEASUREMENTS & DIMENSIONS | WIRING CONNECTIONS |
|---|
| L | W H WEIGHT |
|---|
| ACTUATOR | T |
|---|
| MLP71MAA | 86.5 (3.41) 48.5 (1.91) 80 (3.15) M30x1.5 0.25 (0.55) |
|---|
| SWITCH | FACTORY SWITCH FUNCTION |
|---|
| NUMBER | SETTINGS Auto cycle ON/OFF If the plant specifications permit it, the auto cycle can be activated during commissioning. Auto cycle prevents the valve |
|---|
| Switch 1 | from jamming when the valve is not moved for a longer period of OFF inactivity, e.g. for heating systems during the summer. When the auto cycle is activated, the actuator will perform 50% stroke cycle if no stroke movement has occurred during a 3-week period. Analog 2-10V DC / 0-10V DC |
|---|
| Switch 2 | Setting control range by the continuous actuating signal 0-10V 0-10V DC DC or 2-10V DC. |
|---|
| Normally open / Normally closed | Normally closed; Actuator Switch Function |
|---|
| Switch 3 | Setting actuating direction with 10V DC control signal to “valve 0V DC = valve The valve functions are adjusted with the DIP open” or “valve closed” as well as the position feedback. closed switches under the connection cover. Equal % control / Linear control |
|---|
| Switch 4 | Setting of actuating control curve to either equal percentage or Linear control linear control. |
|---|
| Switch 5 | No function. Close Electrical override Setting override function to ON and the actuator will open valve |
|---|
| Switch 6 | OFF fully. When set to OFF again, the actuator will re-calibrate and thereafter go into normal operation mode. FCU Pressure Independent Control Valves Kits | www.honeywell.com | 8 |
|---|
| Failsafe Function: Yes, optional open or | 24V AC: 5.8VA operating (6.8VA max.) Protection Rating: IP54 incl. upside- |
|---|
| close | 24V DC: 2.9W operating (3.3W max.) down, class III, indoor use only |
|---|
| Control Signal: Analog 0(2)-10V DC or | Ambient Temperature: 0°C to +50°C Weight: 0.27 kg / 0.60 lb |
|---|
| digital 2-position with constant power | (+32°F to +122°F) Valve Size Compatibility: DN15 - DN32 |
|---|
| supply | Media temperature: 0°C to +120°C Override: Yes, Electrical |
|---|
| Feedback: Yes, control signal (analog) or | (+32°F to +248°F) |
|---|
| MLE71MAA | 86.5 (3.41) 48.5 (1.91) 80 (3.15) M30x1.5 0.27 (0.60) |
|---|
| DC = valve | The valve functions are adjusted with the DIP open” or “valve closed” as well as the position feedback. |
|---|
| closed | switches under the connection cover. Equal % control / Linear control Linear |
|---|
| Feedback: No | (+32°F to +248°F) Valve Size Compatibility: DN15 - DN32 |
|---|
| Actuating Force: 160N -10N/+70N | Humidity Rating: 0-85% RH, no Override: Yes, Electrical |
|---|
| MLP71MNA | 86.5 (3.41) 48.5 (1.91) 80 (3.15) M30x1.5 0.25 (0.55) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 10 |
|---|
| Operation: ON/OFF or Floating | Position Indicator: Yes Protection Rating: IP54, class II |
|---|
| Type: Bi-directional step motor | Stroke: 1 to 8.5 mm / 0.04 to 0.33 in (auto Fixed, 3 wires x 0.80 mm², 1.5 meter cable |
|---|
| Power Consumption: 8VA | adjusting) Closing point adjustment: During |
|---|
| Control Signal: Digital (2-position / | Ambient Temperature: 0°C to +50°C operation the actuator will self-adjust |
|---|
| Manual Override: Yes (5 mm Allen key) | Humidity Rating: 0 to 85% RH, no Valve Size Compatibility: DN15 - DN32 condensation |
|---|
| MLP41MNA-NU | 93.0 (3.66) 50 (1.97) 88 (3.46) M30x1.5 0.23 (0.51) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 11 |
|---|
| 功耗 | Actuating Force: 200N (-30N/+70N) Fixed, 3 wires x 0.22 mm², 1.5 meter cable |
|---|
| Inrush Current: 1.8A (peak) | Ambient Temperature: 0°C to +50°C operation the actuator will self-adjust |
|---|
| Control Signal: Analog 0-10V DC | (+32°F to +122°F) according to the closing point and stroke |
|---|
| Media temperature: 0°C to +120°C | length of the valve. (+32°F to +248°F) Weight: 0.23 kg / 0.51 lb |
|---|
| Humidity Rating: 0 to 85% RH, no | Valve Size Compatibility: DN15 - DN32 condensation |
|---|
| MLP71MNA-NU | 93.0 (3.66) 50 (1.97) 88 (3.46) M30x1.5 0.23 (0.51) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 12 |
|---|
| Operation: ON/OFF | Stroke: 6.5 mm /0.256 in Wire Connection: Fixed, |
|---|
| Failsafe Function: Yes, normally closed3 | Power Consumption: 1.2W down, class II |
|---|
| Control Signal: ON/OFF, normally closed | Ambient Temperature: 0°C to +60°C Weight: 0.11 kg / 0.24 lb |
|---|
| Actuating Force: 140 N | (+32°F to +140°F) Valve Size Compatibility: DN15-DN32 |
|---|
| MLP41TNA | 61.0 (2.40) 69.3 (2.73) 0.11 (0.24) (1.91) (1.50) (1.74) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 13 |
|---|
| Failsafe Function: Yes, normally closed5 | Power Consumption: 1.2W down, class III |
|---|
| Control Signal: Analog 0-10V, normally | Ambient Temperature: Weight: 0.12 kg / 0.27 lb |
|---|
| MLP71TNA | 63.5 (2.5) 63.5 (2.5) 71.8 (2.83) 0.12 (0.27) (1.50) (1.74) FCU Pressure Independent Control Valves Kits | www.honeywell.com | 14 1.1. Contractor shall install FCU PICV Kit and valves where indicated in drawings. 2.1. Housing shall consist of forged brass DZR ASTM CuZn36Pb2As rated at no less than 2000 kPa (290 psi) and +120°C (+248°F). 2.2. Housing shall be permanently marked to show direction of |
|---|
| ACTUATOR MODEL NUMBER | SPECIFICATIONS |
|---|
| Phone: +974 4 4066 200 | 38-00102M-01 | Rev 01 | 02/22 |
|---|
| Fax: +974 4 4066 711 | © 2022 Honeywell International Inc. |
|---|
