| make space for the back of the speaker | Speaker Strobe shown (as installed and close-up) brackets to get a tight fit between the appliance and ceiling tile ing school retrofits. assembly 115, 150, and 177 candela 70.7 Vrms) and power settings (¼, ½, 1 and 2 watts) SpectrAlert Advance products (61 cm x 61 cm opening) tional decals available as accessories. DN-62019:A • 7/5/2022 — Page 1 of 4 |
|---|
| Architect/Engineer Specifications | shall have power taps and voltage that are selected by rotary switches. SPEAKER STROBE COMBINATION SYNCHRONIZATION MODULE approved for fire protective service. The module shall synchronize |
|---|
| SPEAKER | SpectrAlert strobes at 1 Hz. The module shall mount to a 411/16 x |
|---|
| Drop-In assembly with speaker behind | Fire rated assembly, |
|---|
| tile. Strobe protrudes below the tile. | Turn-key solutions, UL 2043 2' X 2' tile Optional FIRE label |
|---|
| Aesthetically neutral | included with |
|---|
| fine-mesh hole pattern | strobe models |
|---|
| L-Series Strobe: Low current | L-Series field selectable Integrated |
|---|
| draw and field selectable for | speaker with ¼W to 2W options junction box full candela range |
|---|
| Physical Specifications | UL/ULC Current Draw and Sound Output Data 32°F to 120°F (0°C to 49°C) |
|---|
| Temperature | UL/ULC Max Strobe Current draw (mA RMS) |
|---|
| Humidity Range | 10 to 93% non-condensing 8 to 17.5 Volts 16 to 33 Volts |
|---|
| 尺寸 | Length Width Depth Candela |
|---|
| DC | DC FWR |
|---|
| SPCWL-TILE/SPCWLA- 23.69 in. | 23.69 in. 3.29 in. |
|---|
| TILE Speaker | (602 cm) (602 cm) (84 mm) 15 87 41 60 |
|---|
| SCWL-TILE/ SCWLA- | 23.69 in. 23.69 in. 3.29 in. 30 153 63 86 |
|---|
| TILE Strobe | (602 cm) (602 cm) (84 mm) 75 NA 111 142 23.69 in. 23.69 in. 3.29 in. 95 NA 134 164 (602 cm) (602 cm) (84 mm) |
|---|
| Speaker Strobe | 115 NA 158 191 150 NA 189 228 177 NA 226 264 |
|---|
| Nominal Voltage (speakers) | 25 Volts or 70.7 Volts (nominal) Ceiling Mount Speaker Sound Output 50 VDC |
|---|
| Strobe Flash Rate | 1 flash per second Setting Reverberant Anechoic (dBA @ 10ft) (dBA @ 10ft) Regulated 12 VDC or regulated |
|---|
| Nominal Voltage (strobes) | ¼W 77 79 24 VDC/FWR1,2 |
|---|
| Operating Voltage Range | ½W 79 82 8 to 17.5 V (12 V nominal) or 16 to 33 V (24 V nominal) 2W 86 88 |
|---|
| Operating Voltage with MDL3 | 8.5 to 17.5 V (12 V nominal) or |
|---|
| Sync Module | 16.5 to 33 V (24 V nominal) |
|---|
| Frequency Range (Speakers) | 400 to 4,000 Hz3 |
|---|
| 供電 | ¼, ½, 1, 2 watts DN-62019:A • 7/5/2022 — Page 3 of 4 Ceiling Mount |
|---|
| SPCWL-TILE | PLAIN Speaker Only, UL-listed |
|---|
| SCWL-TILE | FIRE Strobe Only, UL-listed |
|---|
| SPSCWL-TILE | FIRE Speaker Strobe, UL-listed |
|---|
| SPSCWLA-TILE | FIRE Speaker Strobe, ULC-listed |
|---|
| ALERT | Labeling Kit, ALERT (pack of 10) |
|---|
| DECAL-TILE-E | FIRE Labeling Kit, FIRE (pack of 10) |
|---|
| DECAL-TILE-FR | FIRE/FEU Labeling Kit, FIRE/FEU (pack of 10) |
|---|
| DECAL-TILE-SPF | FUEGO Labeling Kit, FUEGO (pack of 10) |
|---|
| LENS-AC2 | na Lens, Ceiling, Amber |
|---|
| LENS-BC2 | na Lens, Ceiling, Blue |
|---|
| LENS-GC2 | na Lens, Ceiling, Green |
|---|
| LENS-RC2 | na Lens, Ceiling, Red |
|---|
| • S4048 | (SPCWL-TILE, SPCWLA-TILE, SPSCW-TILE, SPSCWA-TILE) This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. Sync•Circuit™ is a trademark of, and Honeywell®, NOTIFIER®, |
|---|
| NOTIFIER | SpectrAlert®, and System Sensor® are registered trademarks of |
|---|
| Northford, CT 06472 | ©2021 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. |
|---|
| www.notifier.com | Country of Origin: Mexico |
|---|