HONEYWELL HCE-DOC-02-033 防盜報警安裝・保養

Name: HONEYWELL HCE-DOC-02-033 FlashScan® Dual Relay/Monitor
Brand: honeywell
SKU: HCE-DOC-02-033

產品簡介

honeywell HCE-DOC-02-033 為FlashScan® Dual Relay/Monitor，HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準，歡迎聯絡我們查詢 HCE-DOC-02-033 香港價格連安裝報價。

power required：automatically assign the next three
• Compact design：• Ability to disable one relay output and/
• LED indication on inputs and outputs：or one monitor input • Rotary decade switch addressing from
front or top (1-99 on CLIP：without electronic programmers. systems, 1-159 on FlashScan
Voltage Range：15- 32 VDC (peak)

HKEZIT 提供原廠行貨保養。硬件連專業安裝、設定及使用教學一站式報價，無需自行研究安裝與設定。我們同時承接裝ALARM、裝防盜、裝警鐘工程，硬件與工程同一團隊負責。

查詢價格連安裝 →

HCE-DOC-02-033 honeywell FlashScan® Dual Relay/Monitor 產品圖片

詳細規格

power required	automatically assign the next three
• Compact design	• Ability to disable one relay output and/
• LED indication on inputs and outputs	or one monitor input • Rotary decade switch addressing from • Addresses can be viewed and changed
front or top (1-99 on CLIP	without electronic programmers. systems, 1-159 on FlashScan systems) Installation Each module can use up to four (4) addresses. The base address selected with the rotary address switches will be assigned to relay output #1 from 00 to 156. The module will automatically assign the next three addresses as appropriate to monitor input #1, relay output #2, and monitor input #2. DIP switch settings can
Voltage Range	15- 32 VDC (peak)
Standby Current (Max	1000µA @ 24VDC (one communication every 5 seconds
Average)	with LED enabled)
Supervisory Voltage	8.8VDC
Maximum Supervisory Line	1,500 Ohms Resistance (Monitor Input)
End-Of-Line Resistor	47k Ohms (Monitor) M200E-SMB-KO: Surface mount box
Relay Contact Rating	2A @ 30VDC. 0.5A @ 125VAC
工作溫度	–5°C to 50°C Range
相對濕度	10% - 93% non-condensing 13.4 cm high x 13.9 cm wide x 4.0 cm deep when Dimensions installed on M200E-SMB-KO Ordering Information FDMR-1-AUS: FlashScan® dual relay, dual monitor module
M200E-PMB: Panel Mount Clip	Mounting Accessories
M200E-DIN	DIN rail mounting clip
M200E-PMB	Panel mounting clip
M200E-SMB-KO:	Surface mount box with knockouts Agency Listings and Approvals These listings and approvals apply to the devices specified in this document. In some cases, certain devices or applications may not be listed by certain approval agencies, or listing may be in process. Consult NOTIFIER for the latest listing status.
M200E-DIN: DIN Rail Mount Clip	• AS7240.18: 2015 ; SAI Global certificate # SMKH25312 • New Zealand Equipment Register. Listing #NI/636 www.notifier.com.au ISO9001 FS 520324
© 2021 Honeywell International Inc.	DOC-02-033 10/21 \| Rev C ENGINEERING & MANUFACTURING QUALITY SYSTEMS