Linear 0-100% O2 ELECTRICAL Temperature Compensation < 4% variation from 0°C to 40°C Connector 3 Pin Molex header (MOLEX 22-29-2031) Recommended Mating Part Molex 3-Way Housing (MOLEX 22-01-2035) Molex Crimp Terminals (MOLEX 08-45-0110) ENVIRONMENTAL Typical Application Checking of SCUBA equipment prior to a dive - not for used during a dive Operating Temperature Range -20°C to +50°C Operating Pre
Packaging Sealed blister
All dimensions in mm All tolerances ±0.15 mm unless otherwise stated * Specifications are valid at 20°C, 50% RH and 1013 mBar, using City Technology recommended circuitry. Performance characteristics outline the performance of sensors supplied within the first 3 months. Output signal can drift below the lower limit over time. Doc. Ref.: divecel3.indd Issue 2 ECN I 4898 Page 2 of 3 4th September 20
Gas
Concentration Balance %O2 Equivalent
Carbon Dioxide, CO2
16% N2 <0.1 SAFETY NOTE This sensor is designed to be used in safety critical applications. To ensure that the sensor and/or instrument in which it is used, are operating properly, it is a requirement that the function of the device is confirmed by exposure to target gas (bump check) before each use of the sensor and/or instrument. Failure to carry out such tests may jeopardize the safety of peopl