| Decreased beam power | Caused over beam power by Decrease signal level (Signal saturation) |
|---|
| because of dense fog | the reflection from wall due to rising sun or sunset which enter to the receiver at the same angle as the transmitted IR beams. |
|---|
| FOG | signal level LED INDICATOR Sun(noise) AND SOUND ASSIST |
|---|
| TX | RX IR Beams(signal) |
|---|
| Transmit power control signal | Transmit power control signal Time |
|---|
| POWER UP | POWER DOWN WIRELESS (BATTERY OPERATED) Increase signal level to avoid signal saturation |
|---|
| Boost beam power | Reduce beam power to avoid |
|---|
| unnecessary reflection | signal level Sun(noise) BEAM TOWER MOUNTING |
|---|
| Beam Power UP | IR Beams(signal) |
|---|
| WIRED | BATTERY |
|---|
| RX | Time SL-200QDP-BT OPERATED |
|---|
| Beam Power DOWN | SL-650QDP-BT |
|---|
| HARD-WIRED MODELS | BATTERY OPERATED MODELS |
|---|
| ADVANCED MODEL | ER, L. STANDARD MODEL BASIC MODEL POW SIGNA |
|---|
| SL-200QDM/350QDM/650QDM | SL-350QFR SL-350QNR |
|---|
| f o r | r |
|---|
| IN ING f | o |
|---|
| WIR | R NO NO WI |
|---|
| FEATURES | FEATURES TRANSMITTER |
|---|
| Main unit | Back box RECEIVER |
|---|
| ・High power quad beam | ・Long distance 100m / 350ft. |
|---|
| ・Double modulation | ・Long battery life - 4 to 8 years Power input (+) Power input (+) |
|---|
| Power input (-) | Power input (-) |
|---|
| ・Beam power control selector | ・Spacious back box for ・A.T.P.C.-Automatic transmit power control wireless transmitter |
|---|
| Low Battery output | DQ output ・I.A.S.C.- Integrated alignment status communication Low Battery output DQ output |
|---|
| Tamper output | Alarm output |
|---|
| ・Upper/lower beam selection button | Tamper output Alarm output ・Beam power control selector |
|---|
| TRANSMITTER | RECEIVER Low Battery output Low Battery output |
|---|
| ＋ | POWER INPUT ＋ POWER INPUT Tamper output 10.5-30VDC [Normal] 10.5-30VDC [Normal] |
|---|
| Specifications | − 3.6VDC [SBU-4] − 3.6VDC [SBU-4] Tamper output |
|---|
| SPARE | SPARE Specifications |
|---|
| Detection range | 60m/200ft. 100m/350ft. 200m/650ft. N.O. D.Q.OUTPUT/ Model SL350QFR SL-350QNR ALARM INPUT |
|---|
| N.C. | LOW BATTERY Detection range 100m/350ft. 100m/350ft. |
|---|
| Beam frequencies | 4ch selectable LOW BATTERY INPUT COM. OUTPUT |
|---|
| Current consumption | Normal 26mA/Max. 60mA (using with SBU-4) N.O. Beam frequencies 4ch selectable - |
|---|
| Ambient temperature | -35°C - +60°C (-30°F - 140°F) COM. |
|---|
| Water protection | IP65 LSH20 lithium batteries manufactured by SAFT |
|---|
| ALARM MEMORY INPUT | Power source Operating range: 3.2 V - 4.0 V lithium batteries |
|---|
| 尺寸 | 448 (17.6) x 79 (3.1) x 96 (3.8) mm(inch) |
|---|
| HхWхD | TAMPER TAMPER OUTPUT(N.C.) Transmitter: 2 or 4 units, Receiver: 2 or 4 units OUTPUT (N.C.) |
|---|
| 重量 | 2500 g(88.2oz) Current consumption 745μA |
|---|
| 工作溫度 | -20°C - +60°C (-4°F - 140°F) |
|---|
| Dimensions H х W х D | 452 (17.9) x 83 (3.3) x 138 (5.4) mm(inch) |
|---|
| SL-200QDP/350QDP/650QDP | BEAM TOWER MODELS FEATURES WIRED MODELS SL-200QDP-BT/350QDP-BT/650QDP-BT ・High power quad beam ・Double modulation ・Upper/lower beam selection button ・Beam power control selector FEATURES ・High power quad beam |
|---|
| N.O. | Beam frequencies 4ch selectable COM. |
|---|
| OUTPUT (N.C.) | Water protection - ALARM MEMORY INPUT |
|---|
| ・Smart design - Slim body | ・Long distance 100m / 350ft. Low Battery output |
|---|
| - Vivid interior color | ・Long battery life - 4 to 8 years Low Battery output Tamper output ・Spacious back box for wireless transmitter Tamper output *This model is not included the cover and the chassis. Specifications RECEIVER |
|---|
| − | − Alarm output |
|---|
