| Passive infrared & | Passive infrared & |
|---|
| Detection method | Passive infrared Passive infrared |
|---|
| Microwave | Microwave |
|---|
| PIR Coverage | 12 m (40 ft) 90° wide / 16 zones 12 m (40 ft) 90° wide / 16 zones SHIELD: |
|---|
| PIR distance limit | 2.5 to 12 m (5 levels) 2.5 to 12 m (5 levels) |
|---|
| Detectable speed | 0.3 to 2.0 m / s (1' to 6'7" / s) 0.3 to 2.0 m / s (1' to 6'7" / s) |
|---|
| 靈敏度 | 2.0 °C ( 3.6 °F) at 0.6 m / s 2.0 °C ( 3.6 °F) at 0.6 m / s Power input |
|---|
| Current draw | 24 mA max. 9.5 to 18 V DC 35 mA max. 3 to 9 V DC Lithium or Alkaline Battery 10 μ A standby / 18 μ A standby / the new shape of security (except walk test) at 12 V DC at 12 V DC 4 mA max. at 3 V DC 8 mA max. at 3 V DC |
|---|
| Alarm period | 2.0 ± 0.1 sec. 2.0 ± 0.1 sec. |
|---|
| Warm-up period | 60 sec. or less (LED blinks) 60 sec. or less (LED blinks) |
|---|
| 警報輸出 | N.C. / N.O. Selectable 28 V DC 0.1 A max. N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A max. |
|---|
| Trouble output | N.C. 28 V DC 0.1 A max. N.C. / N.O. Selectable-Solid State Switch 10 V DC 0.01 A max. |
|---|
| Tamper output | N.C. 28VDC 0.1 mA max. open when cover unit, main unit or mounting plate is removed |
|---|
| Red LED ; 1. Warm-up | Red LED ; 1. Warm-up 2. Alarm 2. Alarm |
|---|
| LED 指示燈 | 3. Masking detection Yellow LED ; 1. Warm-up 3. Masking detection Yellow LED ; 1. Warm-up |
|---|
| DIP switch ON or Walk test | 2. MW detection DIP switch ON or Walk test 2. MW detection |
|---|
| -20°C to +60°C | -20°C to +45°C -20°C to +60°C -20°C to +45°C Operation temperature (-4°F to +140°F) (-4°F to +113°F) (-4°F to +140°F) (-4°F to +113°F) |
|---|
| Environment humidity | 95 % max. 95 % max. |
|---|
| International protection | IP55 IP55 |
|---|
| Mounting | Wall, Pole (Outdoor,Indoor) Wall, Pole (Outdoor,Indoor) |
|---|
| Mounting height | 0.8 to 1.2 m (2'7" to 4') 0.8 to 1.2 m (2'7" to 4') Face cover (White) / Body (Black) |
|---|
| 重量 | 400 g (14.1 oz.) 450 g (15.9 oz.) 500 g (17.6 oz.) 550 g (19.4 oz.) Connector for POWER and ALARM,Connector for TROUBLE, |
|---|
| Accessories | Screw (4 x 20 mm) x 2, Masking seal x 3 Velcro tape, Screw (4 x 20 mm) x 2, Masking seal x 3 The VX Shield is a series of four outdoor sensors Being only a part of a complete system, we cannot accept responsibility for any damages or other consequences resulting from an intrusion. Black and White models VXS-AM: wired PIR VXS-DAM: wired dual tech (PIR / microwave) |
|---|
| OPTEX INC. / AMERICAS HQ (U.S.) | OPTEX SECURITY SAS (France) OPTEX (DONGGUAN) CO.,LTD. |
|---|
| URL: www.optexamerica.com | URL: www.optex-security.com SHANGHAI OFFICE (China) VXS-RAM: battery-operated PIR |
|---|
| OPTEX DO BRASIL LTDA. (Brazil) | OPTEX SECURITY Sp.z o.o. (Poland) URL: www.optexchina.com VXS-DRAM: battery-operated dual tech (PIR / MW) |
|---|
| URL: www.optex.net/br/es/sec | URL: www.optex.com.pl OPTEX (Thailand) CO., LTD. (Thailand) |
|---|
| URL: www.optex.net/th/th | White models |
|---|
| OPTEX CO.,LTD. (JAPAN) | OPTEX (EUROPE) LTD. / EMEA HQ (U.K.) OPTEX PINNACLE INDIA, PVT., LTD. (India) White cover / white body models |
|---|
| URL: www.optex-europe.com | URL: www.optex.net/in/en/sec |
|---|
| OPTEX TECHNOLOGIES B.V. (The Netherlands) | OPTEX KOREA CO.,LTD. (Korea) VXS-AM(W), VXS-DAM(W) |
|---|
| URL: www.optex.eu | URL: www.optexkorea.com VXS-RAM(W), VXS-RDAM(W) Copyright (C) 2016 OPTEX CO., LTD. No.77087-17378-01-1703 Face Cover ( Silver ) / Body (Black ) Reliable Secure |
|---|
| Convenient | Secure A sense of security Designed for you Wide optical |
|---|
| Reliable | lens creates |
|---|
| the atmosphere | Smooth |
|---|
| Robust and | that the surface 12 m / 40 ft Wide and Triple Layer Detection Area weather proof premises are matches |
|---|
| housing | protected. the wall. PIR DETECTOR with anti-masking VXS-AM (wired model),VXS-RAM (battery operated model) Active IR anti-masking detects covering objects on lens surface when monitoring of the detector status is required. Product Features PIR / MW DETECTOR with anti-masking |
|---|
| Battery life for the | Multipurpose Back Box for VXS-RAM / VXS-DRAM only VXS-DAM (wired model),VXS-RDAM (battery operated model) integrated algorithm of both PIR and Microwave provides the battery-operated models BATTERY BOX (RBB-01) ultimate stability in detection performance. In a field where strong sun hits the land or facing direct light beams from traffic. 37 33 |
|---|
| Battery saving Walk test | Battery saving Walk test (1.46) (1.30) DAM/RDAM offers higher false alarm immunity. Battery mode mode mode mode mode 33 33 (1.30) (1.30) 112 (4.41) 120s interval 5s interval 120s interval 5s interval 60 (2.36) 150 (5.91) |
|---|
| CR123A | 6 years 5 years 4 years 3 years *Battery not included. 80 (3.15) |
|---|
| Disarm | Sabotaged Trouble out CR2 4 years 3 years 2 years 1 years CR123A x 3 (3.0 V DC) 1/2AA 5 years 4 years 3 years 2 years CR2 x 3 (3.0 V DC) 1/2AA x 3 (3.6 V DC) Calculation based on: single type of battery, no power 1/2AA x 6 (7.2 V DC x 3)* |
|---|
| Trouble | sharing with the transmitter, LED off and anti-masking on. 50 (1.97) 40 (1.57) 55 (2.17) 40 (1.57) *3.6 V DC 1/2 AA battery in series. signal Unit: mm (inch) |
|---|
| Digital Triple Layer Detection | SMDA (Super Multidimensional Analysis) logic EOL Module Socket Back Tamper |
|---|
| Both the upper / lower PIR detection | All VXS models are equipped with a Detection |
|---|
| Detection | (VXS,AM,DAM only) Trouble output activates |
|---|
| areas and MW detection area must | digitally enhanced signal recognition logic |
|---|
| simultaneously be crossed to | called SMDA. By analyzing detection Optional EOL (End of line) when back box as well as |
|---|
| generate an alarm. Each activation is | patterns and environmental information resistor modules are available. chassis is removed. |
|---|
| independently analyzed so that | MW PIR SMDA improves immunity against various No Detection |
|---|
| spurious events can be filtered and | noise factors such as climate changes |
|---|
| ignored. | No Detection and vegetation sways, and can |
|---|
| This technology virtually eliminates | distinguish between the cause of |
|---|
| nuisance detection of smaller | nuisance false alarms and genuine SHIELD Housing |
|---|
| animals in the premises. | intrusions. IP55 Protection |
|---|
| MW | PIR etc. UV Resistant ASA Body |
|---|
| Easy to install and set-up | Automatic Walk Test Mode 5 Types of Versatile design Walk test modes starts Area Masking Seals OPEN when closing the cover. |
|---|
| Walk test mode expires | a b c Use for masking optional area. |
|---|
| d e | f g h i j k l m n Use for two wing area setting.(A or G position) |
|---|
| a b c | d e f g h i j k l m n Pre-cut masking |
|---|
| Use for masking optional area. | Use for two wing area setting.(A or G position) |
|---|
| g h | j g h j |
|---|
| LOCK | 3 minutes and return to |
|---|
| Normal mode. | included in all packages. 1 2 90 degrees rotation lock Blue components 1 2 |
|---|
| Easy to open / close cover | Easy to recognize where 1 2 |
|---|
| Black cover / Black body | Silver cover / Black body White cover / Black body White cover / White body to touch Not Detection detection |
|---|
| Web based manual | Web based manual |
|---|
| for wired models | for battery operated models |
|---|
| http://navi.optex.net/manual/50105 | http://navi.optex.net/manual/50109 |
|---|
| Easy to adjust | Level indicator |
|---|
| the detection area | Easy to recognize the sensor is installed even with the ground |
|---|
| ●Double Conductive Shielding | ●Sensitivity Adjustment Switch ●Battery saving timer Basic common features |
|---|
| ●Area Masking Seals | ●Cover Tamper |
|---|
