| • | Dual phone lines per UL and NFPA requirements. |
|---|
| enclosure. | Maximum current while communicating and with open |
|---|
| — Independent zone/point supervisory. | Installation |
|---|
| — AC (mains) Power Loss (programmable). | MS-9600: Mounts to cabinet with option bracket BRKT-9600. |
|---|
| — Low Battery and Earth Fault. | MS-9200: Mounts to main circuit board with supplied hard- ware. |
|---|
| Sensiscan 2000: | Mounts to CHS-4 chassis with supplied |
|---|
| — 12- or 24-hour Test Signal. | hardware. |
|---|
| — EIA-485 Communication Bus Failure. | 1F enclosures allows locating the UDACT-F up to 6,000 feet from host panel. phone lines, communication failure with either Central |
|---|
| Station, total communications failure. | Product Line Information for testing of phone lines and RJ31X jack. instructions and mounting hardware. Kissoff, Comm Fail, Primary Line Seize, Secondary Line ABS-8RF: Metal enclosure for external mounting up to 6,000 |
|---|
| Seize and Modem Communications. | feet from host FACP. UBS-1F: Metal enclosure, with viewing window and relay ure, phone line fault and UDACT-F troubles. mounting capability. Mounts up to 6,000 feet from host FACP. MR-101/CR: Single SPDT Form-C relay with LED, mounted in |
|---|
| • Extensive transient protection. | plastic enclosure with metal backplate. Contacts rated for 10A |
|---|
| • Simple EIA-485 interface to host panel. | @ 115 VAC. Connects to open collector relay driver. MR-201/CR: Single DPDT Form-C relay with LED, mounted in |
|---|
| Electrical Specifications | plastic enclosure with metal backplate. Contacts rated for 10A |
|---|
| Standby current: 40 mA. | @ 115 VAC. Connects to open collector relay driver. |
|---|
| Current while communicating: 75 mA. | FBD-1: Ferrite bead kit. Required for remote mounting only. df-51294:A • 03/27/09 — Page 1 of 2 In some cases, certain modules may not be listed by certain approval agencies, or listing may be in process. Consult factory |
|---|
| Communication Formats | for latest listing status. |
|---|
| Silent | ITI Radionics Sescoa SurGuard |
|---|
| Format # | Ademco Knight FBI Hoffman |
|---|
| CS-4000 CP220FB | 6000/6500 3000R MLR-2 (Addresses 16 & 42) 685 (1) Models 9000 (3) (5) (7) (9) 1&2 |
|---|
| A | 4 + 2 /Standard/1900/2300 X X (2) X X(4) X X(5) X X |
|---|
| B | (NOT USED) |
|---|
| C | 4 + 2 /Standard/1900/1400 X X (2) X(4) X X X |
|---|
| D | (NOT USED) |
|---|
| E | Ademco Contact ID X X X X |
|---|
| F | (NOT USED) |
|---|
| •Fire Alarm | •Supervisory •Pullstation •Heat Detector •Waterflow •Duct Detector •Flame Sensor •Smoke Zone ©2009 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate al |
|---|
