honeywell DF-51339 為MS-9200，HKEZIT 提供原廠行貨連保養、上門安裝、調試及使用教學一站式服務。詳細規格以下方原廠 Datasheet 欄位為準，歡迎聯絡我們查詢 DF-51339 香港價格連安裝報價。
| I300 | Isolator Module. |
|---|---|
| • Weight: 150 grams (5 oz.). | I300A Isolator Module, ULC listed. |
| SMB500 | Optional surface-mount backbox. |
| C304 | Addressable Control Module. |
| C304A | Addressable Control Module, ULC listed. |
| Back:(888) 388-3299. | Made in the U.S.A. DF-51339 — Page 1 of 2 |
| a monitor module to the control panel. | M301 Mini-Monitor Module does not include LED. |
| • High noise (EMI/RFI) immunity. | • Two rotary switches for direct-dial entry of Decade address (01-99). |
| M300 | M301 M302 |
| Monitor Module | Mini-Monitor Module Two-wire Conventional |
| The Fire•Lite M300 Monitor Module is | Though the Fire•Lite M301 can be used Smoke Detector |
| used with the MS-9200 to monitor a single | to monitor an entire Class B initiating cir- Monitor Module |
| open contact devices. It can be used to | N/O contact devices. The M301 is small The Fire•Lite M302 Monitor Module is |
| monitor a zone of four-wire smoke detec- | enough to fit inside a single-gang junction used with the MS-9200 to monitor a single |
| tors, manual fire alarm pull stations, | box behind the device being monitored. Its Initiating Device Circuit (IDC) of compat- |
| waterflow devices, or other normally open | small size and light weight allow it to be ible two-wire smoke detectors. The moni- |
| dry-contact alarm activation devices. The | installed without the need to be rigidly tored circuit may be wired as an NFPA |
| monitored circuit may be wired as an NFPA | mounted. It can be used to monitor a single Style B (Class B) or Style D (Class A) Ini- |
| tiating Device Circuit. | tectors, manual fire alarm pull stations, wa- external resettable 24VDC power. terflow devices (per local authority) or other normally-open, dry-contact devices. It may FEATURES |
| • Terminals with SEMS screws and clamp- | also be used to monitor normally-open su- • Supports compatible two-wire smoke de- |
| ing plates for ease of wiring. | pervisory devices with special supervisory tectors. |
| • Built-in magnetic alarm test switch. | indication at the control panel. The moni- • Supervises IDC wiring and connection |
| • Mounts in standard 4" square (2-1/8" | tored circuit/device is wired as an NFPA of external power source. |
| deep) junction boxes. | Style B (Class B) Initiating Device Circuit. • Built-in magnetic alarm test switch. |
| PRODUCT LINE | FEATURES • Mounts in standard 4" square (2-1/8" deep) junction boxes. • Compact size; only 2.75" [70 mm] high |
| module. | x 1.30" [33 mm] wide x 0.50" [12.7 mm] PRODUCT LINE |
| M300A | Contact device monitor deep. M302 Two-wire detector monitor |
| module, ULC listed. | • Tinned, stripped leads for wiring ease. module. |
| M02-04-00 | Alarm Test Magnet. • Class B (Style B) IDC only. M302A Two-wire detector monitor |
| • Capable of mounting behind monitored | module, ULC listed. |
| backbox. | device in single-gang box. M02-04-00 Alarm Test Magnet. |
| M301 | Contact device mini-monitor module. |
| M301A | Contact device mini-monitor module, ULC listed. Face plate for M300, M302, C300, and I300 |
| To a 2-wire | To MS-9200 |
| Class-B | Address- M300 and M302 |
| initiating | able |
| circuit | Loop |
| Specifications | M300 M301 M302 |
| Operating voltage: | 15 - 28VDC (peak) 15 - 28VDC (peak) 15 - 28VDC (peak) |
| Maximum current in alarm: | see MS-9200 Technical Manual see MS-9200 Technical Manual 90 mA |
| Standby current: | 400 A maximum 400 A maximum 300 A max. (Style D, 1.3 mA) |
| Temperature range: | 32 F to 120 F (0 C to 49 C) 32 F to 120 F (0 C to 49 C) 32 F to 120 F (0 C to 49 C) |
| 相對濕度 | 10% to 93% 10% to 93% 10% to 93% |
| 重量 | 150 grams (5 oz.) 150 grams (5 oz.) 150 grams (5 oz.) |
| EOL resistor value: | 47 K ohm 47 K ohm 3.9 K ohm |
| IDC loop length: | 2,500 feet (7.62 km) maximum 2,500 feet (7.62 km) maximum 2,500 feet (7.62 km) maximum |
| IDC loop resistance: | 40 ohms maximum 20 ohms maximum 25 ohms maximum |
* 規格以原廠最新 Datasheet 為準。
下載完整PDF規格書 →DF-51339 honeywell MS-9200亦適合以下專業服務機構使用，保安同合規要求同一般商鋪唔一樣，歡迎查詢度身方案。
HKEZIT 提供原廠行貨連保養，DF-51339 原廠行貨連保養，提供上門評估、安裝、防區設定及使用教學一站式服務，全港 32 區均有服務。
詳細規格請參閱上方規格表；我們會按現場環境（商舖、辦公室、倉庫、住宅）設計防區及感應器布局，並提供整體方案報價。
可按需求配置本地警號、手機 App 推送或短訊通知；亦可與 CCTV 聯動，觸發時自動錄影存證。
兩者屬同系列產品，實際應該邊個型號更適合，需視乎現場環境同需求而定。歡迎直接聯絡我們免費現場評估，由工程師建議最合適方案。
HKEZIT 提供 DF-51339 原廠行貨連保養，安裝後如有故障可直接聯絡我們安排上門維修，毋須自行聯絡原廠。詳情請參閱防盜報警安裝工程頁面或聯絡我們查詢保養範圍。
HKEZIT 於全港各區提供 DF-51339 honeywell MS-9200供貨連專業安裝服務（裝ALARM、裝防盜、裝警鐘），熱門地區包括：黃大仙防盜報警系統安裝、上水防盜報警系統安裝、中環防盜報警系統安裝、九龍城防盜報警系統安裝、九龍灣防盜報警系統安裝、佐敦防盜報警系統安裝、元朗防盜報警系統安裝、北角防盜報警系統安裝。港島、九龍、新界全港 32 區均有上門安裝，歡迎聯絡我們查詢 DF-51339 香港價格連安裝報價。
DF-51339 honeywell MS-9200適合多種場景使用，以下為部分常見安裝場景，歡迎查詢是否適合您的現場環境。
婦產科診所裝防盜系統，超聲波檢查室紅外線探測、門磁窗磁全面佈防，非診症時段自動戒備配警鐘聯動保安公司，24小時中央監控站接報即時通知，誤觸發率低不影響日常應診。免費上門評估，銅鑼灣、尖沙咀專科醫務中心即約報價。
WhatsApp 查詢 →心臟科診所裝防盜系統，心臟儀器室紅外線探測、門磁窗磁全面佈防，非診症時段自動戒備配警鐘聯動保安公司，24小時中央監控站接報即時通知，誤觸發率低不影響日常應診。免費上門評估，銅鑼灣、尖沙咀專科醫務中心即約報價。
WhatsApp 查詢 →脊醫／物理治療中心裝防盜系統，治療儀器室紅外線探測、門磁窗磁全面佈防，非診症時段自動戒備配警鐘聯動保安公司，24小時中央監控站接報即時通知，誤觸發率低不影響日常應診。免費上門評估，銅鑼灣、尖沙咀專科醫務中心即約報價。
WhatsApp 查詢 →兒科診所裝防盜系統，候診及診症區紅外線探測、門磁窗磁全面佈防，非診症時段自動戒備配警鐘聯動保安公司，24小時中央監控站接報即時通知，誤觸發率低不影響日常應診。免費上門評估，銅鑼灣、尖沙咀專科醫務中心即約報價。
WhatsApp 查詢 →律師事務所裝防盜系統，文件檔案室紅外探測、門磁窗磁全面佈防，非辦公時段自動戒備配警鐘聯動保安公司，24小時中央監控站接報即時通知，誤觸發率低唔驚動客戶機密資料。持牌團隊免費勘察、明碼報價，中環、金鐘等法律樓層即約評估。
WhatsApp 查詢 →珠寶鑑定拍賣行裝防盜系統，展廳夾萬震動探測、紅外幕簾防破窗、緊急按鈕直通保安公司，24小時中央監控站聯防配合CCTV追蹤，誤觸發率低確保拍賣現場運作暢順。免費上門評估、高保安方案報價，中環、金鐘拍賣行即約勘察。
WhatsApp 查詢 →查看更多防盜報警適用場景，請參閱 防盜報警安裝工程。
如需整套防盜報警方案，請參閱 防盜報警安裝工程。