| Features | OPTIONS • Remote LED output connection, PN RA100Z(A). |
|---|
| • Two-wire loop connection. | Applications |
|---|
| • Unit uses base for wiring. | Use photoelectric detectors in life-safety applications to pro- vide a broad range of fire-sensing capability, especially where smoldering fires are anticipated. Ionization detectors are often |
|---|
| • Addressable by device. | better than photoelectric detectors at sensing fast, flaming and 01 – 159 with MS-9600UD(LS). |
|---|
| ARCHITECTURE | Construction quickly and dependably to a broad range of fires. tic. SD355(A) series plug-in, low-profile smoke detectors are designed to commercial standards and offer an attractive appearance. |
|---|
| • Built-in tamper-resistant feature. | Installation SD355(A) series plug-in detectors use a detachable mounting field cleaning. base to simplify installation, service and maintenance. |
|---|
| OPERATION | Mount base (all base types) on an electrical backbox which is |
|---|
| sec.) without triggering a false alarm. | boxes, see DF-60059. |
|---|
| threshold level. | loop, end-of-line resistors are not required. Wiring “T-taps” or branches are permitted for Style 4 (Class B) wiring. SD355R(A) mounts in a D355PL(A) or DNR(A)/DNRW duct detector housing. cating with the fire panel) and latches on in alarm. |
|---|
| MECHANICALS | Operation |
|---|
| • Sealed against back pressure. | Each SD355(A) series detector uses one of 99 possible cm) octagonal box, or 4.0" (10.16 cm) square electrical box (SLC). It responds to regular polls from the system and reports (using a plaster ring — included). its type and status. The addressable photoelectric sensor in the SD355(A) series |
|---|
| OTHER SYSTEM FEATURES | has a unique unipolar chamber that responds quickly and uni- |
|---|
| tection. | wind gusts up to 4,000 feet-per-minute (20 m/sec.) without |
|---|
| • 94-V0 plastic flammability rating. | sending an alarm level signal. Because of its unipolar cham- |
|---|
| • Low standby current. | ber, the SD355(A) series is approximately two times more responsive than most photoelectric sensors. This makes it a more stable detector. DF-52384:D • 2/11/2015 — Page 1 of 2 |
|---|
| Detector Sensitivity Test | SD355RA: Same as SD355R with ULC Listing for use with a D355PLA or DNRA duct detector housing; B210LPA base |
|---|
| MS-9600UD(LS) for record keeping. | NOTE: The detector’s plug-in base can be changed off for special applications. For details about intelligent bases and their mount- ing, see DF-60059. B210LP(A): Plug-in detector base (included); standard U.S. |
|---|
| Voltage range: 15 – 32 VDC (peak). | flanged low-profile mounting base. |
|---|
| Standby current: 300 µA @ 24 VDC. | B210LPBP: Bulk pack of B210LP; package contains 10. |
|---|
| – B210LP(A): 6.1" (15.5 cm) diameter. | sound output with ANSI Temporal 3 or continuous tone. Replaces B501BH series bases in retrofit applications. – B501(A): 4.1" (10.4 cm) diameter. |
|---|
| – B200SR(A): 6.875" (17.46 cm) diameter. | B224RB(A): Plug-in System Sensor relay base. Screw termi- nals: up to 14 AWG (2.0 mm²). Relay type: Form-C. Rating: 2.0 |
|---|
| – B224RB(A): 6.2" (15.748 cm) diameter. | A @ 30 VDC resistive; 0.3 A @ 110 VDC inductive; 1.0 A @ |
|---|
| Weight: 3.6 oz. (102 g). | 30 VDC inductive. |
|---|
| to 158°F). | ACCESSORIES |
|---|
| Temperature: 0°C – 49°C (32°F – 120°F). | F110: Retrofit flange to convert B210LP(A) to match the B350LP(A) profile, or to convert older high-profile bases to F110BP: Bulk pack of F110; package contains 15. F210: Replacement flange for B210LP(A) base. |
|---|
| status. | SMB600: Surface mounting kit |
|---|
| • | UL Listed: S1059. M02-04-00:Test magnet. |
|---|
| Product Line Information | (1.524 m) sections. |
|---|
| included. | box of 10. |
|---|
| detector housing; B210LP base included. | of this document is strictly prohibited. This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to change without notice. For more information, contact Fire•Lite Alarms. Phone: (800) 627-3473, FAX: (877) 699-4105. www. |
|---|
