| COM contact for | 33 Wi-Fi of the Wi-Fi 26 COM |
|---|
| Relay 4 | (Off, Green, Yellow, and Red) Normally Closed 27 NC4 |
|---|
| contact | Indicates operational status |
|---|
| Ethernet | 34 Bluetooth of the Bluetooth 1 (Off, Green, Yellow, RJ45 10/100 base-T/TX 28 and Red) Ethernet 2 Indicates the operational status |
|---|
| WiFi | Antenna for both 35 Main LED of the Smart IO Connector |
|---|
| and | Wi-Fi and (Off, Green, Yellow, SMA 29 Bluetooth Bluetooth and Red) |
|---|
| antenna | 802.11a/b/g/n/ac + BT 4.2 NOTES: |
|---|
| Physical button to | — Ethernet Ports are for Future Use Reset/Wireless |
|---|
| activate Bluetooth | — USB-C Port is for Future Use. |
|---|
| 藍牙 | — Wi-Fi 5 GHz is for Future Use. Button |
|---|
| /Factory | or reset the device 30 to factory default. — The GNDs for the UIO and DI are intercon- |
|---|
| 重設 | nected. |
|---|
| 按鈕 | — Refer to 31-00429(SmartIO Installation Instructions) for terminal wiring. |
|---|
| TECHNICAL SPECIFICATIONS | Standards Table 7. Standards |
|---|
| 防護等級 | According to final product evaluation, |
|---|
| Table 4. System Data | Class meet requirements of IP20 |
|---|
| Operating | Product CAN/CSA-E60730-1:02, Ethernet 19 to 29 Vac (50/60Hz) Standards Protocol version IEEE 802.3,BACnet Voltage (AC) Standard 135 version 1.14 Operating 23 to 29 Vdc Testing IEC68 Voltage (DC) Electrical |
|---|
| Overvoltage | Protected against overvoltages of Components |
|---|
| protected against short-circuiting. | Certification • UL60730-1 |
|---|
| • | CSA E60730-1 |
|---|
| volts. | • EN 60730-2-9 |
|---|
| 功耗 | • CAN ICES-3 (B)/NMB-3(B) RoHS II: 2011/65/EU |
|---|
| System | The system transformer(s) must be |
|---|
| 供電 | Transformer safety isolating transformers |
|---|
| Device | according to IEC 61558-2-6. In the 24 Vac 24 Vdc U.S.A. and Canada, NEC Class 2 transformers must be used. |
|---|
| Smart IO | Max. 27 VA Max. 12W |
|---|
| Mounting | DIN43880 and DIN19 compliances |
|---|
| Table 6. Operating Environment | Other Specifications |
|---|
| Ambient | -25 to 55 °C (-13 to 131 °F) Table 8. Other Specifications Operating |
|---|
| Temperature | Real-Time Clock Buffered for 72 hours by gold |
|---|
| Retention | capacitor |
|---|
| Wi-Fi and | -10 to 55 °C (14 to 131 °F) Bluetooth Operating Temperature Communication Baud Rates |
|---|
| Humidity | Ethernet port 10/100 Mbps autobaud |
|---|
| Storage | -28.9 to +70 °C (-20 to 158 °F) Wi-Fi 802.11b: up to 11Mbps |
|---|
| Vibration | 0.024” double amplitude (2 to 30 Hz), 802.11ac: up to 433Mbps |
|---|
| Under | 0.6 g (30 to 300 Hz) |
|---|
| Operation | Bluetooth BR: up to 1Mbps EDR: up to 3Mbps |
|---|
| Dust, Vibration | According to EN60730-1 BLE: up to 1Mbps |
|---|
| RFI, EMI | Commercial, light, industrial, |
|---|
| residential environments | NOTES: |
|---|
| — | Ethernet Ports are for Future Use. |
|---|
| MTBF (Mean | 11.5 years — Wi-Fi 5 GHz is for Future Use. Time Between Failure) 5 31-00427 | Rev.10-20 |
|---|
| Restrictions in the 5 GHz band | Restrictions dans la bande de 5 GHz canal(MSS). Table 10. Smart IO Part Numbers |
|---|
| Part Number | Description |
|---|
| IO-10MIXR-NWE | Wireless Smart IO with North American conformance |
|---|
| IO-10MIXR-WE | Wireless Smart IO with European and Latin America conformance Table 11. Accessories Part Numbers |
|---|
| ANT-REM | screw mounted base. 1.5 meter (4.9 feet) cable length for remote mounting of the antenna. Includes Ferrite Ring. (Pack of 4) Local antenna for wireless communication. IO-ANT-LOC (Pack of 5) Table 12. Remote Antenna Part Numbers |
|---|
| CA #ANTT935-4 | ADAM External 2.4 GHz: 2.9dbi 5 GHz: 5.9dbi |
|---|
| GW.05.0113W | TAOGLAS External 2.4 GHz: 2.57dbi 5 GHz: 1.38dbi 105 mm (4.13”) 110 mm 130.7 mm 45 mm (4.33”) (5.15”) (1.77”) 57.5 mm (2.26”) 7 31-00427 | Rev.10-20 |
|---|
| GENERAL SAFETY | The Smart IO is used for the purpose of building HVAC control and is suitable for use only in non-safety controls |
|---|
| INFORMATION | for installation on or in appliances. start-up), all manufacturer instructions and in particular the Installation and Commissioning Electric Shock SELV Instructions (EN1B-0206IE10) are to be observed. Protection disconnect modules, and the auxiliary terminal Pollution Degree Pollution Degree 2, suitable for use packages) may be installed and mounted only by in industrial environments. authorized a |
|---|
| followed. | product |
|---|
| has been approved by Honeywell. | Action relay) temperature for at least 24 hours before applying Software Class Class A power. This is to allow any condensation resulting from low shipping/storage temperatures to evaporate. Enclosure According to final product lockable cabinet) ensuring that unauthorized persons IP20 have no access to the terminals. 60730-1,UL-916, and UL60730-2-9. Test parts Standard(s) C22.2, No. 205-M1983 (CNL |
|---|
| for indoor use only. | System Europe: safety isolating |
|---|
| Transformer | transformers according to |
|---|
| Safety Information as per EN60730-1 | IEC61558-2-6 U.S.A. and Canada: NEC Class-2 Directive |
|---|
| having a slot height of max. 45 mm. | • At the end of the product life, |
|---|
| possible). | center. • Do not dispose of the device with the usual domestic refuse. • Do not burn the device. ® U.S. Registered Trademark |
|---|
| customer.honeywell.com | © 2020 Honeywell International Inc. 31-00427 | Rev.10-20 |
|---|
