| • Sleek, low-profile | • Bi-color LEDs flash • Low standby current • Optional remote, |
|---|
| design | green whenever the • Addressable single-gang LED |
|---|
| • Visual rotary switch | sensor is addressed, communication accessory (RA-100Z) |
|---|
| addressing | and light steadily red • Suitable for installation • Stable communication |
|---|
| • Built-in functional test | on alarm* technique with noise in ducts |
|---|
| switch activated by an | • Optional relay, isolator, immunity Note: *Only the red LED |
|---|
| external magnet | or sounder bases is operative in panels that do not operate in Velociti® mode. |
|---|
| SYSTEMS | TEMPERATURE AND HUMIDITY RANGES For a complete listing of all compliance approvals and |
|---|
| ATD-L2F/ATD-RL2F: | This system meets NFPA requirements for operation at 0 certifications, please visit: |
|---|
| Dimensions: 2.1" (5.3 cm) Height | – 49°C/32 – 120°F and at a relative humidity 93% ± 2% http://www.gamewell- RH (noncondensing) at 32°C ± 2°C (90°F ± 3°F). fci.com/en-US/ 4.1" (10.4 cm) diameter installed in the B501 base However, the useful life of the system's standby batteries documentation/Pages/ 6.1" (15.5 cm) diameter installed in the B210LP base and the electronic components may be adversely affected Listings.aspx |
|---|
| Shipping Weight: 4.8 oz. (137 g) | by extreme temperature ranges and humidity. Therefore, |
|---|
| 工作溫度 | it is recommended that this system and its peripherals be Gamewell-FCI®, Velociti® and |
|---|
| ATD-L2F or ATD-RL2F: –4° F to 100° F | E3 Series® are registered installed in an environment with a normal room trademarks of Honeywell (–20° C to 38°C) temperature of 15 – 27°C/60 – 80°F. International Inc. ATD-HL2: –4° F to 150°F (–20 C to 66°C) STANDARDS |
|---|
| Sensor Spacing: | UL® is a registered trademark UL® approved for 50 ft. (15.2 m) center to center The ATD-L2F/ATD-RL2F are designed to comply with the of Underwriters Laboratories |
|---|
| following standards: | Inc. FM approved for 25 x 25 ft. (7.6 x 7.6 m) spacing Canada Inc. This document is not intended modules or applications may not be listed by certain purposes. We try to keep our approval agencies, or listing may be in process. product information up-to- |
|---|
| Voltage Range: 15 - 32 Volts DC peak | Consult factory for latest listing status. date and accurate. We cannot |
|---|
| Standby Current: | cover all specific applications UL: S2332 200 mA @ 24 VDC (without communication) (max. avg.) or anticipate all requirements. FM: 3023594 .0003 A @ 24 VDC (one communication every 5 seconds All specifications are subject to |
|---|
| MEA FDNY: 219-02-E Vol. VI | change without notice. with LED blink enabled) CSFM: 7270-1703:0115 LED Current (max.) .0065 A @ 24 VDC (LED lit) ISO 9001 Certification Dimensions: 4.1” (10.4 cm) diameter Dimensions: 6.1” (15.5 cm) diameter Dimensions: 6.1” (15.5 cm) diameter SPDT 2 coil latching relay 1 Form C contact UL/CSA Rating: 0.9 A @ 125 VAC (inductive) 0.9 @ 110 VDC (inductive) 3.A @ 30 VDC (resistive) Dimensions: 6.1” |
|---|
| www.honeywell.com | ©2017 Honeywell International Inc. |
|---|
