| sitivity increases with heat. | Maximum alarm current (LED on): 10 mA @ 24 |
|---|
| • Microprocessor-based technology. | Loop resistance: 40 ohms maximum; varies accord- |
|---|
| • MS-9600 and MS-9200 compatible. | ing to control panel used. Refer to the MS-9600 (51335) and MS-9200 (51003) manuals. Operating humidity range: 10% - 93% non-con- - 99 on MS-9200). Operating temperature range: 00 to 380C (320 to need for electronic programmers. Air velocity rating: 0 to 4,000 ft/min (20.32 m/sec). Height: 1.66 inches (42.16 mm). Diameter: 4.1 inches (104.14 mm). sounder. Weight: 3.6 oz. (104 g). |
|---|
| magnet. | Thermal sensor: 1350F (570C) fixed. |
|---|
| • Listed to UL 268. | INSTALLATION |
|---|
| SPECIFICATIONS | The Adapt plug-in detector uses a separate base to simplify installation, service and maintenance. A spe- cial tool allows maintenance personnel to plug in and This document is not intended to be used for installation purposes. We try to keep our product information up-to-date and accurate. We cannot cover all specific applications or anticipate all requirements. All specifications are subject to |
|---|
| Phone: (800) 627-3473 | Toll Free FAX: (877) 699-4105 DF-52257 — Page 1 of 2 |
|---|
| ing base boxes include: | U.S. single-gang electrical box. For use with B501 and B350LP bases only. |
|---|
| SMK400 | Surface mounting kit provides for entry of |
|---|
| RMK400 | Recessed mounting kit. For use with B501 |
|---|
| PRODUCT LINE | base only. |
|---|
| AD350 | Low-profile intelligent multi-sensor M02-04-01 Test magnet. |
|---|
| detector. | XR-2 Detector removal tool. Allows installation |
|---|
| Available Bases: | and/or removal of detector heads from |
|---|
| B350LP | Plug-in Detector base (included). Dimen- bases in high ceiling applications. |
|---|
| sions: 6.1” (155 mm . Mounting: 4” (102 | XP-4 Extension pole for XR-2. Comes in three |
|---|
| mm) square box with or without plastic | 5-ft. (1.524 m) sections. ring, 4” octagon box, 3 1/2” octagon box or single gang box. All mounting boxes have a minimum depth of 1.5” (38 mm). |
|---|
| B501BH | Standard European 4” (101.6 mm) flangeless base, with sounder. |
|---|
| B501BHT | Same as B501BH, but includes temporal sounder. |
|---|
| B224RB | Intelligent relay base. |
|---|
| B224BI | Intelligent isolator base. Isolates SLC loop shorts. |
|---|
| SDG-773 | Smoke detector guard. This guard, although mechanically compatible, is NOT UL-compatibly listed with the AD350 |
|---|
