| Features | the primary receiver, programming the unit to takeover the identity of the primary receiver under the event that it |
|---|
| and IPDACT IP remote devices. | • Local and remote management tools: Local management |
|---|
| tered devices. | Remote management is implemented via a telnet session. work access to avoid generating false technical alarms under formance and protection against viruses and hacker attacks. a communications failure situation. remote MIP and IPDACT devices. |
|---|
| communications with installed IP modules. | receiver can be connected to the automation server via a serial connection, using ContactID format and emulating Sur- 2. Alarm automation configuration: The VisorALARM supports gard, Radionics or Ademco receiver protocols. Surgard, Radionics and Ademco protocols for easy integra- nal smart card that can be used for immediate system MAS, Microkey). replacement under crash recovery situations. 3. Co |
|---|
| unavailable. | Receiver Options mary and secondary VisorALARM receivers support the The VisorALARM receiver implements advanced network main- tenance functions which allow all installed MIP and IPDACT |
|---|
| User-Configurable Events | units to send alarms and polling signals to a maintenance receiver. MIP and IPDACT units will report to the secondary |
|---|
| Event 300 | Failure in the receiver ventilators destination in those cases where the main VisorALARM fails. |
|---|
| Event 350 | mIP is not sending polling traffic |
|---|
| Event 356 | Loss of connectivity in the central line Line Supervision Support |
|---|
| Event 358 | Main receiver has detected the backup receiver The VisorALARM receiver gets supervision messages from the |
|---|
| is down | MIPs. All registered MIP and IPDACT units send periodic keep- |
|---|
| Event 394 | mIP begins to poll the backup receiver alive or polling signals to the receiver, which then answers with |
|---|
| Event 395 | Configuration error in the mIP an acknowledgement response. The status of all the registered |
|---|
| Event 396 | Main receiver has activated MIP and IPDACT units is periodically checked. A 350 Contact-ID alarm code is generated and sent to the automation server for |
|---|
| Event 397 | Receiver has lost IP communication those MIP and IPDACT who have not notified their availability |
|---|
| Event 398 | Backup receiver has activated (Communication trouble). To avoid the VisorALARM generating |
|---|
| Event 399 | Backup receiver has activated as a result of the hundreds or thousands of communication failure alarms when |
|---|
| main receiver being down | there is a general IP traffic reception failure, the VisorALARM |
|---|
| Event 531 | A new mIP has been registered monitors the network access to a stable and well-known internet |
|---|
| Event 633 | Free space in the alarms buffer is above 25% address: if the echo packets to this address fail, a 356 Contact- ID alarm code is generated (Loss of central polling). |
|---|
| Event 634 | Free space in the alarms buffer is below 25% |
|---|
| Event 635 | Alarms buffer is full DF-60273:B • 03/19/2010 — Page 1 of 2 |
|---|
| VisorALARM Technical Specifications | WAN INTERFACES |
|---|
| • | Protocols: FRAME RELAY, X.25, PPP, SDLC, X.28 |
|---|
| HARDWARE ARCHITECTURE | • Interfaces: Insertable drivers V.24 / V.35 / X.21 DTE/DCE |
|---|
| ing on the version | • Speed: 200 to 2048 Kbps |
|---|
| the version | • Emulation: Surgard, Radionics 6500 and Ademco 685 on the version. EEPROM 2 Kbytes, NVRAM 128 Kbytes DIMENSIONS AND WEIGHT • Type: Desktop |
|---|
| CONFIGURATION INTERFACE | • L x W x H: 12.21 x 16.34 x 1.69 inches |
|---|
| • Telnet: Password protected | ENVIRONMENTAL SPECIFICATIONS • Room temperature: On: 41º to 131ºF. Off: -4º to 140ºF |
|---|
| AC POWER | • Relative humidity: On: 8% to 85%. Off: 5% to 90% |
|---|
| • Input Current: 0.5- 1.0 A | CERTIFICATES AND APPROVALS |
|---|
| • Input Frequency: 47-63 Hz | • UL1610: Central Station Burglar Alarm Units • UL1076: Proprietary Burglar Alarm Units and Systems |
|---|
| LAN INTERFACE | • ULC/ORD=C1076-M1986: Proprietary Burglar Alarm Units & |
|---|
| • Speed: 10 Mbps/100 Mbps (100BaseT) | • CAN/ULC S304-M88: Central and Monitoring Station Burglar |
|---|
| • Connector: RJ45 female | Alarm Units ORDERING INFORMATION • VisorALARM: Receiver 60273sys.jpg Fire•Lite® Alarms is a registered trademark of Honeywell International Inc. VisorALARM® is a registered trademark of the Teldat Corporation. ©2010 by Honeywell International Inc. All rights reserved. Unauthorized use of this document is strictly prohibited. This document is not intended to be used for installation purposes. We tr |
|---|
